Miscellaneous - CnMemory, Knipex, Romagna Plastic (265)

pliers chrome plated, handles with multi-component grips

pliers chrome plated, handles with multi-component grips

Electronic side cutters, Super-Knips. Play-free joint, extremely effortless motion, precision-milled. cutting edges without grinding, with opening spring and limiter. Length 125 mm, narrow head, without bevel Cutting force: soft wire from 0.2 to 1.0 mm in

Wiring pliers for gripping, bending and stripping insulation from wires from 0.5 - 0.75/1.5 and 2.5 mm² as well as for crimping wire end ferrules 0.75/1.5/2.5mm².

Electronic gripping pliers For precision work on electronic parts. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 145 mm, Flat-round, long jaws.

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 160 mm Head chrome-plated, handles VDE-insulated 1000 V. Stripping values: 0.5 to 5 mm diameter

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

head mirror polished, handles with multi-component grips, Oblique End Cutter, short head Style 5: Oblique End Cutter, short head, without bevel, for flush cutting, a = 27°

tool burnished, handles with multi-component grips

With replaceable blades for four or six different conductor cross-sections Conductor is not damaged thanks to precisely ground shaped blade, even fine-stranded wire are gently stripped Clamping jaws hold the wire firmly while stripping With adjustable

ESD positioning tweezers hold, insert and pull: With dimensionally adapted shapes, the gripping surfaces are ideal for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore be inserted and move

pliers grey atramentized, head polished, handles with slim multi-component grips

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

For Knipex Crimp System Pliers For non-insulated tubular cable lugs and crimp terminals in accordance with DIN 46237 and non-insulated butt and crimp connectors in accordance with DIN 46341.

Positioning tweezers for holding, inserting, and pulling: With dimensionally adapted shapes, the gripping surfaces are ideally suited for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore b

pliers grey atramentized, head polished, handles with slim multi-component grips

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

Electronics side cutters for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length: 115 mm, round Head shape, without bevel Cutting force: Soft wire from 0.3 to 1.3 mm diam

For burr-free cutting of plastic piping (e.g. plastic reinforced pipes) with a diameter of 6 - 35 mm Not suitable for cable cutting Blades can be replaced and can be retrieved from any position Little force is required thanks to special cutting geometr

pliers chrome plated, handles with multi-component grips

Alligator® Set

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

chrome plated, handles with multi-component grips

pliers burnished, handles with multi-component grips, with 3 interchangeable crimping dies

pliers chrome plated, handles with multi-component grips

Identical to KN 35 22 115 yet with dissipative handle casings for electro- static protection.

pliers chrome plated, handles with multi-component grips, with integrated tether attachment point for a tool tether

non-insulated terminals + cable connectors

With electrically conductive coating: Universal ESD tweezers balance and control potential differences between their user and the components. They meet the requirements of the electronics and precision mechanics industry and protect sensitive components.

liers black lacquered, handles with multi-component grips insulated terminals + cable connectors 0,75 - 6,0 / 18 - 10

Suitable for 95 05 20 SB electrician's scissors, ideal for CutiX universal knives or similar slim tools such as installation pliers, TwinGrip etc., made of durable polyester fabric

Optimally suited for design fittings and other highly sensitive materials thanks to soft, smooth gripping surfaces. Allows use on chrome if the jaws of the pliers wrench have been damaged by improper or too rough use.

Identical to KN 78 61 125 yet with dissipative handle casings for electro-static protection. The slight offset of the cutting edges is by design, so that sharpness remains for longer.

pliers black atramentized, head polished, handles plastic coated

KNIPEX BiX® Clever pipe cutter: Cuts pipes without shavings and fits comfortably in the hand. Can cut high-temperature plastic drain pipes and electrical conduits in next to no time. Can be used to cut sealing sleeves during final assembly – close to the

KNIPEX flat nose pliers 160 mm, VDE g-tested • Flat, short, wide jaws • Serrated gripping surfaces • Chrome vanadium electric steel, forged, oil-hardened Length: 160 mm

Side cutters for universal use, with inductively hardened precision blades, chrome-plated head, normal bevel, length 140 mm. Plastic sleeves VDE-insulated, 1000 V, IEC 900 Cutting force: Soft wire up to 4.0 mm in diameter, hard wire up to 1.8 mm in diamet

non-insulated open plug type connectors (plug width 2.8 + 4.8 mm)

87 09 250 V01 Protective jaws 87 xx 250 (3 pairs)