Miscellaneous - COLOP, Colors-it (38)

The stepper motor controller uses the ULN2003 driver and is supplied with a 4-phase, 5-V stepper motor. The stepper motor controller also features four LEDs that indicate the output channel currently in use. Specifications • ULN2003 driver • Includes 5-V

This battery pack turns the StromPi 3 into a fully fledged UPS solution. The battery pack, which acts as a third power source, is monitored and automatically recharged. It is based on LiFePO4 technology and offers several key advantages over standard lith

The 7 inch (17.78 cm) TFT display expands the Raspberry Pi or Banana Pi with a touchscreen display in no time at all. It can also be used on any Windows device and convinces with its high contrast and colour-fast display. With a maximum resolution of 1024

The 10.1'' IPS touch screen display has been specially developed for professional installation and offers an impressive range of technical specifications. Its excellent image quality and versatile connectivity make it the ideal solution for a wide range o

LCD touch display 10'' for developer boards The new 10'' touch display with metal housing from Joy-IT is a robust all-rounder and suitable for a wide range of applications. It is characterized by its robust workmanship. The matt black metal housing comple

The MotoPi board is an expansion board for controlling and using up to 16 PWM controlled 5V servo motors. The own clock on the MotoPi provides a very accurate PWM signal and therefore also an accurate positioning. The board has 2 inputs for a voltage of 4

The e-mark ribbons are made of 100% cotton and are excellent for printing on with the COLOP e-mark®. For an optimal imprint result, we recommend use together with the COLOP e-mark® Ribbon Guide. Product properties High-quality cotton ribbons made of 100%

With the 3.5 inch (8.89 cm) TFT touchscreen display, you can build a mini tablet PC based on a Raspberry Pi in no time at all. The display, which has a maximum resolution of 480 x 320 pixels, is simply plugged onto the existing GPIO connections and theref

The e-mark ribbons are made of 100% cotton and are excellent for printing on with the COLOP e-mark®. For an optimal imprint result, we recommend use together with the COLOP e-mark® Ribbon Guide. Product properties High-quality cotton ribbons made of 100%

Made of a special wash-resistant material, which allows the marking of textiles. Iron on to fabrics. Product properties Washable textile ribbon Optimally suited for use with COLOP e-mark Ribbon® Guides and ruler Colour: white Dimensions: 15 mm x 8 m

The e-mark ribbons are made of 100% cotton and are excellent for printing on with the COLOP e-mark®. For an optimal imprint result, we recommend use together with the COLOP e-mark® Ribbon Guide. Product properties High-quality cotton ribbons made of 100%

Made of a special material that makes the imprints scratch and water resistant. Self-adhesive label adheres firmly to paper, cardboard, plastics, glass, metal and similar materials. Product properties Scratch and water resistant Easy removal of the label

With the new StromPi 3 you are perfectly equipped for every application! The latest addition to the ''StromPi family'' opens up completely new application possibilities for the Raspberry Pi and many other developer boards. In addition to the already avail

COLOP e-mark go ruler for precise positioning of the e-mark go COLOP e-mark go ruler for precise positioning. Enables even printing and edge printing on virtually any surface. Enables straight-line printing and printing of narrow edges. Using the ruler,

The Ribbon Guide provides a consistent, uniformly positioned imprint on ribbons and similar objects in a simple and effective manner. Simply thread the object to be printed into the Ribbon Guide, insert the COLOP e-mark from above into the Ribbon Guide an

Mini Dater S160 L3 self-inking, blue-red date stamp with text ''Gebucht'' Mini Dater S160 L3 Dimensions (W x D): 1.2 x 2.5 cm Text line: Gebucht Enclosure material: plastic Text surface: Rotatable Text colour: Blue

COLOP e-mark go ribbon guide (10, 15 and 25 mm) for accurate printing onto ribbons and endless labels The ribbon guide provides a consistent, uniformly positioned imprint on ribbons and similar objects in widths of 10, 15 and 25 mm in a simple and effect

The Arcade Joystick from Joy-IT is robust and a true all-rounder. Whether you want to use your Raspberry Pi to emulate an arcade machine or control a robot arm, the Arcade Joystick provides faithful service. Thanks to its high-quality microswitches, it ca

Description This compact IPS TFT display is controlled via SPI and is well suited for use as an output device on microcontrollers (e.g. NodeMCU) and single board computers (e.g. Raspberry Pi). By using a high resolution IPS panel with a high pixel density

Motor controller for all Raspberry Pi variants, including two stepper motors. The user guide can be found under ''Datasheets & Downloads''. Included in delivery • Ready assembled control board • 2x stepper motors.

Compatible Arduino™ Mega 2560 Board This compatible Arduino™ Mega 2560 board is a microcontroller board based on the ATmega2560. It has 54 digital I/O pins (14 of which can be used as PWM outputs), 16 analogue inputs, 4 UARTs (serial hardware interfaces),

COLOP e-mark go mobile printer The e-mark go is one of the most compact and easy-to-use mobile printers on the market. Developed and produced in Austria, it has already been awarded the prestigious German Innovation Award 2022 in Gold. Features: Multicol

USB stick module for programming the ESP8266, in ESP-01 design The ESP module is plugged into the USB stick and the stick is connected with your PC or Raspberry Pi. This then establishes a serial communication interface between the PC and the ESP8266 modu

The new COLOP 3-colour ink cartridge C2 enables full-colour imprints and excellent printing results from the first print even with irregular use. It is specially adapted for the printing experience with the COLOP e-mark, the COLOP e-mark create and the CO

The colour Mini-Dater S 120 is a classic date stamp with a black print. The date is set by rotating the bands. With a print size of 2.0 x 0.4 cm (W x H) and a font height of 0.4 cm, the COLOP Mini-Dater S 120 offers you the optimal font size to be seen on

With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The

Made of a special material that makes the imprints scratch and water resistant. Self-adhesive label adheres firmly to paper, cardboard, plastics, glass, metal and similar materials. Product properties Scratch and water resistant Easy removal of the label

COLOP e-mark go protective case for transport and protection The COLOP protective case protects the e-mark go against scratches, splashing water and other external factors. The protective case provides optimal protection during storage and transport. Its

Description This UART TTL to RS485 converter allows you to add an RS485 interface to your single board computer. The module is easy to use and is controlled via the UART interface. With up to 1 km transmission range, data transfers with widely spaced dev

Protective case for Colop e-mark

Experience excellent display and intuitive operation with our 3.2'' display, specially designed for your Raspberry Pi. Despite its compact size, this display with a brilliant resolution of 320x240 pixels ensures that your content is always presented in vi

The e-mark event wristbands are ideal for parties, events or other occasions. They can be easily printed with the COLOP e-mark®. The special material ensures that the print is resistant to scratches and splashes. Product details: 100 event wristbands per

The 25.4 cm (10.1'') IPS touch display is a universal all-rounder and offers a maximum resolution of 1280 x 800 pixels. The display can be installed in your own systems and constructions, mounted on a wall or set up with the included feet. Technical data

This microcontroller board opens up the world of programming and offers you the same computing power of the MEGA2560, but with a smaller footprint. It also has many more connections than comparable boards (Arduino Uno), moreover it is operated with the Ar

COLOP MARKY Refill Kit Box refill pack for the consumables included in the MARKY marking set. COLOP MARKY Refill Kit with ink pad, 40 labels and 1 m iron-on tape Refill material, for the ''Printer 20'' consumables included in the MARKY marking set Easy

COLOP MARKY marking stamp set. ''Pastel green'' version. Stamp size: 38 x 14 mm. Easy-to-use tool for applying and stamping prints to clothing and school items Easy to personalise with text and symbols, with up to three lines possible Special textile i

COLOP MARKY marking stamp set. ''Pastel pink'' version. Stamp size: 38 x 14 mm. Easy-to-use tool for applying and stamping prints to clothing and school items Easy to personalise with text and symbols, with up to three lines possible Special textile i

COLOP MARKY marking stamp set. ''Pastel blue'' version. Stamp size: 38 x 14 mm. Easy-to-use tool for applying and stamping prints to clothing and school items Easy to personalise with text and symbols, with up to three lines possible Special textile in