Miscellaneous - COLOP, M-Tech, MS-Tech (69)

This 18-watt LED glass tube measures 120 cm. As with conventional versions, the LED-powered tube also has a standard G13 base, making it a quick like-for-like replacement. The warm white light emitted by the LED tube is distributed evenly over the opal gl

12 V multicolor LED light strip (RGB + white) from OPTONICA LED on flexible strip for decorative lighting. The LED strip has bright and long-life RGB (red, green, blue) and white LEDs. This allows you to create not only standard colors (red, green, constr

KP-2012SURCK, Hyper Red (AlGaInP), Water Clear, 120...230mcd, 2.0 x 1.25 mm SMD Chip LED Descriptions: • The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode • Electrostatic discharge and power surge could damage

Stylish fan with RGB effects 26 RGB LEDs Vibration-free operation thanks to rubberised supports Connection via 4-pin PWM Colour control via 3-pin 5-V RGB header on the motherboard The smooth-running 140-mm RGB LED fan from Argus offers a stylish effect

The JARO 20060 M LED spotlight from Brennenstuhl is an extremely energy-efficient LED floodlight with 150 W power that meets the highest demands. It also impresses with its extremely flat design and robustness. The built-in Everlight SMD LEDs ensure an ex

Eterno M-3026 - your affordable standard mouse with a comfortable button feel. Robust standard mouse with comfortable button feel and smooth-running scroll wheel. A 1000-dpi sensor enables precise working. The sufficiently long cable with USB connection m

ARGUS L-12025 Series - stylish fans with spiral effect With its 33 ultra-bright LEDs, the smooth-running 120mm LED fans from Argus offer a stylish spiral effect and also fill the interior of the housing. Rubberized supports in the fan corners, on both sid

The JARO 14060 M LED spotlight from Brennenstuhl is an extremely energy-efficient LED floodlight with 100 W power that meets the highest demands. It also impresses with its extremely flat design and robustness. The built-in Everlight SMD LEDs ensure an ex

The mobile JARO 3060 M LED spotlight from Brennenstuhl is an extremely energy-efficient LED construction spotlight with 20 W power that meets the highest demands. It also convinces with its extremely flat design and its compactness. The built-in Everlight

With this set, the IPC 3U 30255, 3U 3416, 4U 4129-N, 4U 4410, 4U 4416, 4U 4420 and 4U 4424 enclosures can be upgraded with PWM-controllable fans. For this purpose, the enclosed cable is connected to the fan backplane and the PWM fan sockets of the motherb

The 24-watt LED glass tube measures 150 cm and shines in a cold white light. This light is particularly suitable for areas with little to no natural light. The light is distributed evenly thanks to the opal glass cover and ensures uniform illumination. Th

IP54 waterproof 12 V LED light strip from OPTONICA LED on flexible strip for decorative lighting. The LED strip has a beam angle of 120°, is equipped with high-quality and long-life LEDs and is ideal for private and business use. Also ideal for outdoor us

Thermal pad made of copper Three nickel-plated copper heat pipes Supports CPUs with a TDP of up to 70 W Including thermal compound The IP-3 is a passive CPU cooler for AMD® and Intel® CPUs with a maximum TDP of up to 70 W, suitable for the IP-40 and IP

Eterno M-230 - robust standard mouse with comfortable button press and smooth-running scroll wheel. A resolution of up to 1600 dpi enables precise working that needs no cables thanks to the supplied USB wireless receiver. Details: Sturdy enclosure USB po

The 9-watt LED glass tube from the BLULAXA® range measures 60 cm and shines in a cold white light. This light is distributed evenly over the entire surface of the opal glass cover and is particularly suitable for areas with little to no natural light. The

Desktop cooler Argus SU-260 This massive desktop cooler, with quiet 120mm fan, provides up to a TDP of 150W for reliable cooling of your CPU. The SU-260 is compatible with numerous Intel® and AMD® sockets. With pre-installed AMD® mounting clamps and Intel

The 24-watt LED glass tube from the BLULAXA® range measures 150 cm and is the ideal replacement for conventional 58-watt T8 fluorescent tubes. A long service life is just one feature of the 24-watt LED glass tube. The warm white light of the LED-powered i

Nous F4 Smart RGBIC LED strip, 5 m If you are looking for a smart home device that can transform your living space with stunning lighting effects, the Nous F4 5m Smart RGBIC WIFI LED Strip is just what you are looking for. This product is a smart WIFI LED

The e-mark ribbons are made of 100% cotton and are excellent for printing on with the COLOP e-mark®. For an optimal imprint result, we recommend use together with the COLOP e-mark® Ribbon Guide. Product properties High-quality cotton ribbons made of 100%

High-quality, 300 watt server power supply with up to 90% efficiency.

120-mm fan with RGB effects 12 RGB LEDs Vibration-free operation thanks to rubberised supports 2-pin connection (e.g. reset switch on the enclosure) Expandable with a wide range of additional RS-051s The smooth-running 120-mm RGB LED fan from Argus off

Hello colour! 16 bright RGB LEDs on each 120-mm fan Rubberised supports for vibration-free operation Volume of only 23 dBA Up to 90.90 cbm/h at 1500 rpm The 120-mm RGB fan in the Halo 3.0 series from ALSEYE impresses with its novel design and is equipp

Stylish fan with rubber corners Vibration-free operation thanks to rubberised supports Fluid plain bearings Connection optionally via 3-pin or 4-pin Molex Includes fan screws The smooth-running 120-mm fan from Argus, with rubberised supports in the cor

The e-mark ribbons are made of 100% cotton and are excellent for printing on with the COLOP e-mark®. For an optimal imprint result, we recommend use together with the COLOP e-mark® Ribbon Guide. Product properties High-quality cotton ribbons made of 100%

Made of a special wash-resistant material, which allows the marking of textiles. Iron on to fabrics. Product properties Washable textile ribbon Optimally suited for use with COLOP e-mark Ribbon® Guides and ruler Colour: white Dimensions: 15 mm x 8 m

18 RGB LEDs with rich colours Vibration-free operation thanks to rubberised supports Connection via 4-pin PWM Colour control via 12-V RGB header on the motherboard Argus L-12025 Aura, RGB - stylish fan with RGB effects. The smooth-running 120-mm RGB LE

The e-mark ribbons are made of 100% cotton and are excellent for printing on with the COLOP e-mark®. For an optimal imprint result, we recommend use together with the COLOP e-mark® Ribbon Guide. Product properties High-quality cotton ribbons made of 100%

This 120-cm LED glass tube has 18 watts of power and shines in a neutral white light. Thanks to its opal glass cover, this light is distributed evenly over the entire surface with no glare and is particularly suitable for areas with little natural light.

Made of a special material that makes the imprints scratch and water resistant. Self-adhesive label adheres firmly to paper, cardboard, plastics, glass, metal and similar materials. Product properties Scratch and water resistant Easy removal of the label

COLOP e-mark go ruler for precise positioning of the e-mark go COLOP e-mark go ruler for precise positioning. Enables even printing and edge printing on virtually any surface. Enables straight-line printing and printing of narrow edges. Using the ruler,

ARGUS L-12025 Series - stylish fans with spiral effect With its 33 ultra-bright LEDs, the smooth-running 120mm LED fans from Argus offer a stylish spiral effect and also fill the interior of the housing. Rubberized supports in the fan corners, on both sid

The Ribbon Guide provides a consistent, uniformly positioned imprint on ribbons and similar objects in a simple and effective manner. Simply thread the object to be printed into the Ribbon Guide, insert the COLOP e-mark from above into the Ribbon Guide an

The JARO 7060 M LED spotlight from Brennenstuhl is an extremely energy-efficient LED floodlight with 50 W power that meets the highest demands. It also impresses with its extremely flat design and robustness. The built-in Everlight SMD LEDs ensure an exce

The mobile JARO 4060 M LED spotlight from Brennenstuhl is an extremely energy-efficient LED construction spotlight with 30 W power that meets the highest demands. It also convinces with its extremely flat design and its compactness. The built-in Everlight

Mini Dater S160 L3 self-inking, blue-red date stamp with text ''Gebucht'' Mini Dater S160 L3 Dimensions (W x D): 1.2 x 2.5 cm Text line: Gebucht Enclosure material: plastic Text surface: Rotatable Text colour: Blue

COLOP e-mark go ribbon guide (10, 15 and 25 mm) for accurate printing onto ribbons and endless labels The ribbon guide provides a consistent, uniformly positioned imprint on ribbons and similar objects in widths of 10, 15 and 25 mm in a simple and effect

This LED glass tube has 24 watts of power and shines in a neutral white light. Thanks to the opal glass cover, this light is distributed evenly with no glare and ensures uniform illumination. The long service life makes the LED-powered tube from BLULAXA®

Perfect for your project! Do not stand in the dark anymore The new LED spotlights by OPTINICA LED are ideal companions for construction, renovations, or workshops, etc. They are available in powers of 20 W with 1600 lumens, 30 W with 2400 lumens and 50 W

COLOP e-mark go mobile printer The e-mark go is one of the most compact and easy-to-use mobile printers on the market. Developed and produced in Austria, it has already been awarded the prestigious German Innovation Award 2022 in Gold. Features: Multicol

Die 15 Watt starke LED Glas Röhre aus der BLULAXA® Serie bemisst 90cm und erstrahlt im warmweißen Licht. Dieses Licht verteilt sich gleichmäßig über die gesamte Oberfläche der opalen Glasabdeckung und eignet sich insbesondere für Bereiche mit wenig oder g