Miscellaneous - Colors-it, Dsquared2, Einhell, Romagna Plastic (20)

The stepper motor controller uses the ULN2003 driver and is supplied with a 4-phase, 5-V stepper motor. The stepper motor controller also features four LEDs that indicate the output channel currently in use. Specifications • ULN2003 driver • Includes 5-V

Practical basic equipment: 2 tool panel walls, including a 28-piece hook range, provide flexibility, visibility and quick access to tools, accessories and other parts. Quick overviews and direct access, whether in the workshop, in the warehouse or even in

Pin headers RM: 2.54 mm Variation 12.60 mm — 1X10 — straight • Nominal current: 3.0 A • Nominal voltage: 250 V eff/V DC • Dielectric strength: 500 V eff for 1 minute • Contact material: copper alloy • Insulation material: Thermoplast UL 94 V-0 • Operating

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

The MotoPi board is an expansion board for controlling and using up to 16 PWM controlled 5V servo motors. The own clock on the MotoPi provides a very accurate PWM signal and therefore also an accurate positioning. The board has 2 inputs for a voltage of 4

The light guide has been designed for the use of type 0805 CHIPLEDs or smaller types and can be strip-mounted in a grid spacing of 5.08 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensures the

Earth connector with blind rivet technology • 2 Poles • Twistproof, vibration-resistant and corrosion-resistant due to internal, rivet-protected contact claws • Direct mounting, no pretreatment of the carrier material surface is required • Time-saving, ea

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

The digital tyre gauge from Einhell allows easy and accurate tyre filling.

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

The underbody protection gun is specially designed for the application of underbody protection, sound-absorbing or sealing material

The Arcade Joystick from Joy-IT is robust and a true all-rounder. Whether you want to use your Raspberry Pi to emulate an arcade machine or control a robot arm, the Arcade Joystick provides faithful service. Thanks to its high-quality microswitches, it ca

Compatible Arduino™ Mega 2560 Board This compatible Arduino™ Mega 2560 board is a microcontroller board based on the ATmega2560. It has 54 digital I/O pins (14 of which can be used as PWM outputs), 16 analogue inputs, 4 UARTs (serial hardware interfaces),

USB stick module for programming the ESP8266, in ESP-01 design The ESP module is plugged into the USB stick and the stick is connected with your PC or Raspberry Pi. This then establishes a serial communication interface between the PC and the ESP8266 modu

Jumper 2.54 mm • Design with opening at the top • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour: black • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

Bullet male fully insulated blue 2,5 mm² 5 mm connectors Nylon

This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the prin

Short circuit bar/addressing plug

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu