Miscellaneous - Colors-it, General Electric (35)

Flashing LED, 5 mm, yellow, Coloured diffused housing. Beam angle: 60° VF = 5 V (590 nm)/5 - 32 mcd GaAsP/GaP Manufacturer no.: L-56BYD

The stepper motor controller uses the ULN2003 driver and is supplied with a 4-phase, 5-V stepper motor. The stepper motor controller also features four LEDs that indicate the output channel currently in use. Specifications • ULN2003 driver • Includes 5-V

These LED reflectors by ALBS are no ordinary reflectors. They have been developed further, tested under laboratory conditions and are produced with outstanding attention to detail. They either increase or slightly dampen the colour reproduction value (RA)

recessed mount with external reflector, chrome-plated ready mounted with yellow 3 mm LED Incl. washer and nut Features Installation Ø: 6.0 mm total height: approx. 13.5 mm Reflector head Ø: 6.8 mm Reflector head height: 2.5 mm Wavelength: 585nm yellow

The NA-SAVP6 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP6 anti-vibration pads for up to 2 compatible 200-mm fans (see compatibility information). The anti-vibration pads, made from extra-soft silicone, reduce the transmission

recessed lampholder with internal reflector, chrome-plated ready mounted with yellow 3 mm LED incl. washer and nut Features installation Ø: 6.0 mm total height: approx. 17 mm reflector head Ø: 7.0 mm Reflector head height: 3.0 mm Wavelength: 588 nm y

LED with low power consumption, 2 mA. 5 mm, yellow-coloured housing, diffused Beam angle: 60° (590 nm)/0.8 - 3.2 mcd Manufacturer no.: L-53LYD

This battery pack turns the StromPi 3 into a fully fledged UPS solution. The battery pack, which acts as a third power source, is monitored and automatically recharged. It is based on LiFePO4 technology and offers several key advantages over standard lith

The 7 inch (17.78 cm) TFT display expands the Raspberry Pi or Banana Pi with a touchscreen display in no time at all. It can also be used on any Windows device and convinces with its high contrast and colour-fast display. With a maximum resolution of 1024

The 10.1'' IPS touch screen display has been specially developed for professional installation and offers an impressive range of technical specifications. Its excellent image quality and versatile connectivity make it the ideal solution for a wide range o

LCD touch display 10'' for developer boards The new 10'' touch display with metal housing from Joy-IT is a robust all-rounder and suitable for a wide range of applications. It is characterized by its robust workmanship. The matt black metal housing comple

The MotoPi board is an expansion board for controlling and using up to 16 PWM controlled 5V servo motors. The own clock on the MotoPi provides a very accurate PWM signal and therefore also an accurate positioning. The board has 2 inputs for a voltage of 4

With the 3.5 inch (8.89 cm) TFT touchscreen display, you can build a mini tablet PC based on a Raspberry Pi in no time at all. The display, which has a maximum resolution of 480 x 320 pixels, is simply plugged onto the existing GPIO connections and theref

CHIP LEDs, type G0805, Length: 2.0 mm Width: 1.25 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing.

With the new StromPi 3 you are perfectly equipped for every application! The latest addition to the ''StromPi family'' opens up completely new application possibilities for the Raspberry Pi and many other developer boards. In addition to the already avail

CHIP LEDs, type G0603, Length: 1.6 mm Width: 0.8 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing. Manufacturer no.: KP-1608YD

The NA-SAVP1 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP1 anti-vibration pads for up to 2 compatible 120/140-mm fans. The NA-AVP1 anti-vibration pads are compatible with the following Noctua fans: NF-A14 FLX NF-A14 PWM chromax

The Arcade Joystick from Joy-IT is robust and a true all-rounder. Whether you want to use your Raspberry Pi to emulate an arcade machine or control a robot arm, the Arcade Joystick provides faithful service. Thanks to its high-quality microswitches, it ca

Description This compact IPS TFT display is controlled via SPI and is well suited for use as an output device on microcontrollers (e.g. NodeMCU) and single board computers (e.g. Raspberry Pi). By using a high resolution IPS panel with a high pixel density

Motor controller for all Raspberry Pi variants, including two stepper motors. The user guide can be found under ''Datasheets & Downloads''. Included in delivery • Ready assembled control board • 2x stepper motors.

Compatible Arduino™ Mega 2560 Board This compatible Arduino™ Mega 2560 board is a microcontroller board based on the ATmega2560. It has 54 digital I/O pins (14 of which can be used as PWM outputs), 16 analogue inputs, 4 UARTs (serial hardware interfaces),

The NA-SAVP3 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP3 anti-vibration pads for up to 2 compatible 140-mm round frame fans such as the NF-A15 (see compatibility information). The anti-vibration pads, made from extra-soft sil

USB stick module for programming the ESP8266, in ESP-01 design The ESP module is plugged into the USB stick and the stick is connected with your PC or Raspberry Pi. This then establishes a serial communication interface between the PC and the ESP8266 modu

KM-23YD-F Yellow SOT-23 Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Features: • Yellow (GaAsP/GaP) • Lens Type: Yellow Diffused • SOT-23 package surface mount LED

With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The

SMD Mini PLCC2 reflector LED for all kind of soldering methods usable, especially if customers like to have an LED with metal leadframe, but in a very small housing

Description This UART TTL to RS485 converter allows you to add an RS485 interface to your single board computer. The module is easy to use and is controlled via the UART interface. With up to 1 km transmission range, data transfers with widely spaced dev

Ultra-bright LED, 3 mm, yellow. Coloured housing, transparent. Beam angle: 50° (590 nm)/10 - 50 mcd

CHIP LEDs, type G1206, Length: 3.2 mm Width: 1.6 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing. Manufacturer no.: KP-3216YD

Experience excellent display and intuitive operation with our 3.2'' display, specially designed for your Raspberry Pi. Despite its compact size, this display with a brilliant resolution of 320x240 pixels ensures that your content is always presented in vi

The 25.4 cm (10.1'') IPS touch display is a universal all-rounder and offers a maximum resolution of 1280 x 800 pixels. The display can be installed in your own systems and constructions, mounted on a wall or set up with the included feet. Technical data

SMD LED with dome lens, yellow, 568 nm, 300 mcd Clear housing Radiation angle: approx. 50° Dimensions (L x W x H): 3.2 x 1.6 x 1.9mm Manufacturer no.: KPTD-3216SYC

Duo-LED, 3 mm, 2-pin, colour change via polarity reversal. red/yellow Colourless housing, diffused Beam angle: 60° 20 mA 8 - 40 mcd

recessed lampholder with external reflector, chrome-plated ready mounted with yellow 5 mm LED. Incl. washer and nut Features Installation Ø: 8.0 mm Total height: approx. 15.5 mm Reflector head Ø: 9.8 mm Reflector head height: 3.5 mm Wavelength: 590nm

This microcontroller board opens up the world of programming and offers you the same computing power of the MEGA2560, but with a smaller footprint. It also has many more connections than comparable boards (Arduino Uno), moreover it is operated with the Ar