Miscellaneous - Colors-it, Printer Maniak, Romagna Plastic (16)

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 5 lengths Strip width: 6 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

Waste toner container for Canon iPF TC-20

The stepper motor controller uses the ULN2003 driver and is supplied with a 4-phase, 5-V stepper motor. The stepper motor controller also features four LEDs that indicate the output channel currently in use. Specifications • ULN2003 driver • Includes 5-V

Suitable for wire cross-section 6 - 16 mm² Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 2 lengths Diameter of sheathed cable: 5.9 - 8.3 mm Method of attachment: push onto wire

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

The MotoPi board is an expansion board for controlling and using up to 16 PWM controlled 5V servo motors. The own clock on the MotoPi provides a very accurate PWM signal and therefore also an accurate positioning. The board has 2 inputs for a voltage of 4

• Very sturdy metal/plastic frame • Load capacity: Up to 80 kg • Printer level (W x D: 68 x 50 cm) • Intermediate level (W x D: 59 x 44 cm) • Base plate (W x D: 59 x 31.5 cm) • Space between levels: 31.5 cm each • Solid feet with level screws to stop the

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

More suitable: for wire cross-sections 0.75 - 1.5 mm² Marking method: thermal transfer Label: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 3 lengths Label surface: 5 x 23 mm Diameter of sheathed cable: 2.3 - 2.8 mm Met

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 9 lengths Strip width: 3 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

The Arcade Joystick from Joy-IT is robust and a true all-rounder. Whether you want to use your Raspberry Pi to emulate an arcade machine or control a robot arm, the Arcade Joystick provides faithful service. Thanks to its high-quality microswitches, it ca

Compatible Arduino™ Mega 2560 Board This compatible Arduino™ Mega 2560 board is a microcontroller board based on the ATmega2560. It has 54 digital I/O pins (14 of which can be used as PWM outputs), 16 analogue inputs, 4 UARTs (serial hardware interfaces),

USB stick module for programming the ESP8266, in ESP-01 design The ESP module is plugged into the USB stick and the stick is connected with your PC or Raspberry Pi. This then establishes a serial communication interface between the PC and the ESP8266 modu

Suitable for wire cross-section 2.5 - 6 mm² Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 3 lengths Label surface: 7 x 26 mm Diameter of sheathed cable: 3.3 - 4.9 mm Method of a

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 5 lengths Strip width: 5 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

• Sturdy metal/plastic frame • Printer level (W x D: 68 x 50 cm) • Intermediate level (W x D: 58.5 x 44 cm) • Base plate (W x D: 57.5 x 31.5 cm) • Moves on four castors, two of which are lockable • Level screws stop the printer stand tipping sideways • Ma