Miscellaneous - Cable - Combinatul Fondului Plastic, Durable, Einhell, MM Spray, Neo Tools, Printer Maniak, V-Mark (40)

Cable bundle markers for use with cable ties Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 500 per roll, 1 length Label surface: 25 x 11 mm Method of attachment: with cable ties Printing device: Wago s

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 3 6A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: red

Cable bundle markers for use with cable ties Suitable: for WAGO terminal blocks Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 1500 WMB markers (5 mm) per roll Marker/strip width: 5 to 5.2 mm Marker wid

The BT-BO 25/1 A jump-start cable provides even inexperienced users with excellent assistance when bridging and/or jump-starting petrol and diesel engines. It is equipped with four fully insulated terminal clips. The conductor material consists of 31.4 mm

The BT-BO 16/1 A jump-start cable provides even inexperienced users with excellent assistance when bridging and/or jump-starting petrol engines. It is equipped with four fully insulated terminal clips. The conductor material consists of 19.4 mm² aluminium

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: yellow

shiverpeaks® BASIC-S cable pull-in aid, nylon, 4 mm, 60 m Use the cable pull-in aid to easily pull your cable through a conduit. There is an eyelet on the GRP pull wire. The enclosed wire loop allows you to attach the cable to the eyelet. The screw-on hea

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 15 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

Ideal for bundling cables, no more knotting. Without appropriate cable protection, a cable can hardly withstand today's requirements in terms of abrasion resistance, tensile strength, dimensional stability or impact resistance. LogiLink's flexible cable

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 5,0m

The poster pocket is ideal for displaying information outdoors or in damp indoor areas such as in garden centres, saunas or swimming pools in which signs may get splashed with water. Details: Inserts are very well protected thanks to waterproof pressure s

EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to a ground potential. cable with 1 megohm safety resistor with 2 push buttons 10/10 mm p

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: blue

EBP-Earth Bonding Point, EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). Earthing point for mounting underneath the table top. EBP / Earth Bonding Point = A common connection point to which ESD control e

Cable bundle markers for use with cable ties Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 500 per roll, 1 length Label surface: 25 x 11 mm Method of attachment: with cable ties Printing device: Wago s

Earthing measurement cable, 4 mm connection, yellow, 50 m length, with cable reel

ESD discharge cable with integrated resistor. Spiral cable, 2x press-stud 10 mm/10 mm Length: 2.4 m

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

Hose clamp pliers, with bowden cable The BRILLIANT TOOLS hose clamp pliers BT526005 with a 65 cm bowden cable is ideal for opening clamps in narrow or hard-to-reach areas. It allows the assembly and removal of all flexible, self-locking belt clamps from

Connecting cable, red/black, angled/straight 4 mm connection, for HIOKI multimeters from product series DT425x/DT428x or similar, CAT III 1000 V, CAT IV 600 V, 120 cm length

ESD discharge cable with integrated resistor. Spiral cable, 3 mm press-stud to 10 mm press-stud Length: 2.4 m

EPA suitable. For working in electrostatic protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to an earth potential. with 1 megohm safety resistor 2 push buttons 10 mm for mats or floor co

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 15,0m

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 1,0m

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

Anti-static ESD earthing wrist strap set ADJUSTABLE SIZE: comfortable hand strap, simply adjust to the required size SAFETY: stiff press stud for maximum safety of the connection to the solder mat. No quick, accidental removal or breaking off possible F

The poster pocket is ideal for displaying information outdoors or in damp indoor areas such as in garden centres, saunas or swimming pools in which signs may get splashed with water. Details: Inserts are very well protected thanks to waterproof pressure s

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

Subminiature incandescent lamp with cable

The ÖLFLEX® CLASSIC 110 is a VDE-registered oil-resistant PVC control cable that can be flexibly used for a variety of applications. Flame-retardant in accordance with IEC 60332-1-2 Excellent chemical resistance Oil-resistant in accordance with DIN EN 5

Cable bundle markers for use with cable ties Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 500 per roll, 1 length Label surface: 25 x 11 mm Method of attachment: with cable ties Printing device: Wago s

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 20 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

Earthing measurement cable, 4 mm connection, red, 50 m length, with cable reel

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 2,0m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 30,0m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 3,0m

shiverpeaks®-BASIC-S--Cable entry aid, nylon, 3 mm, 30m Use the cable entry aid to pull your cabling through ductwork effortlessly. An eyelet is provided on the nylon pull wire to fasten the cable to, and a guide spring to make it easier to negotiate ang

TITANEX H07RN-F 3G1.5, black, wound, in a film bag, tested to VDE 0285-525-2-21 The high-quality H07RN-F cable is ideal for use in moving devices and electrical installations. Its versatile applications range from construction sites to industrial applic