Miscellaneous - Dsquared2, Einhell, GoPro, Noiseblocker, PowerPlus, Sensor (213)

Noiseblocker is passionate about extremely quiet fans. The Multiframe models in particular, with an innovative housing and suspension, are the flagships in the company’s range. Noiseblocker is expanding the range to include very small fans with the BlackS

Noiseblocker is the specialist in particularly quiet fans. In order to achieve this, the company relies on maximum quality with low manufacturing tolerances and a high level of technological know-how with German engineering. In addition, the manufacturer

Four sockets 1 m power cable Added safety with child protection Conveniently stores inside the BluCave power module Docks under the BluCave shelf to provide power supply to a workbench 4-socket power strip can be conveniently stored in the BluCave power m

Female Header Single Row, 2,00mm (0,079'') ,Straight Dip type profile=4,30mm, 2x2-pin

Female Header Double Row, 2,00mm (0,079'') ,Straight Dip type profile=4,30mm, 2x16-pin

Mounting shank For 68/68S/68W/80/80S/80W drill bits M16 external thread with holes for centre drill. Driven by SDS Plus shank Drill Ø 9 mm (Does not include drill bit)

Flexibility, visibility and quick access to tools, accessories and other parts with the Superclip system. It consists of a tool wall panel (steel perforated plate) and different versions of tool hooks. The clips can be mounted anywhere on the wall and mov

2-way splitters 5…1218 MHz High return loss For multimedia-use In- and outputs hum-decoupled High intermodulation suppression Screening factor Class A +10 dB, according to EN 50083-2 Return loss and isolation according to VFKD TS 220

Jumper 2.54 mm • Design with opening at the top • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour: black • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

Highly practical silicone work mat for soldering work or repairing electronic components. Dimensions: 45 x 30 cm Anti-static Heat resistant up to 500°C Wipeable Suitable for soldering electronic components For repairing printed circuit boards etc. 14 stor

The METRAclip 87 clamp multimeter is suitable for the measurement of medium power values in the low-voltage range, and thus offers optimized safety for all types of systems and under any measuring conditions. In addition to applications in the areas of ma

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

Sensor/actuator connection cable M12, A-coded, 5-pin, M12 plug straight - free cable end, PVC, gray, unshielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and conveyor te

Q200 Plus chipboard screw TX, partial thread Thread: 5,0 Thread: 80 mm Steel zinced, Plastic-Box

Sensor/actuator connection cable M12, A-coded, 4-pin, M12 plug straight - free cable end, PVC, gray, unshielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and conveyor tec

the fischer Power-Fast FPF-ST P chipboard screw is a chipboard screw with a countersunk head, torx TX drive and partial thread. The countersunk head with a torx TX drive guarantees maximum power transmission with maximum bit stability for flush-mounted sc

Digital panel thermometer with thermistor probe Product series: DMR20-1-TMP Measuring range: -35 °C to 105 °C Display type: LED Temperature sensor type: NTC Colour: Red Number of digits: 3 Digit height: 7,6 mm Power supply: 6 VDC to 50 VDC DC powe

The METRAclip 86 clamp multimeter meets all of the expectations of operations in the electrical trades and is suitable for applications in the low-voltage range with low to medium power values, e.g. maintenance of electrical installations and machinery, t

The Einhell TE-AC 24 Silent compressor is a multi-functional base unit for your garage or workshop. Whisper-quiet compressor with low noise emission of 57 dB (LpA) Much quieter than standard compressors with the same power Oil-free, service-free motor for

Includes Media Mod, removable windscreen, vertical mounting buckle and thumb screw Built-in directional mic delivers crystal-clear audio and reduces wind and ambient noise Two cold-shoe mounts to attach your favourite lights, mics or LCD screens 3.5-mm

Bullet male fully insulated blue 2,5 mm² 5 mm connectors Nylon

Noiseblocker is the specialist in particularly quiet fans. In order to maintain this status, the company relies on high quality with low manufacturing tolerances and a high level of technological know-how with German engineering. The manufacturer also tak

Sensor/actuator connection cable M12, A-coded, 4-pin, M12 connector straight - free cable end, PVC-C, gray, shielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and convey

Efficient spray bottle for universal use Plastic nozzle adjustable from fine spray to strong beam Capacity: 1 litre

Includes The Handler (floating hand grip) and wrist strap Keeps your GoPro afloat better than ever before so you can shoot in and around the water worry-free Easy to switch between mounts with a quick-release base Makes it easy to aim your camera and c

This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the prin

Loop-powered unipolar-reading process monitor with 4 - 20 mA input and red LED display. Product series: DMR20-4/20 Measuring range: 4 mA to 20 mA Display type: LED Colour: Red Number of digits: 3,5 Digit height: 7,6 mm Power supply type: Loop-powere

Water analysis made easy! With the McPower swimming pool water tester you can analyse the exact chlorine and pH values in seconds. You can then effectively influence water quality without the inaccuracy of traditional test strips. Ph value measurement Ch

MCPower universal nut, for 1/4'' to 3/4'', incl. adapter This ingenious tool replaces almost your complete tool case and adapts to almost any type of screw. Easily loosen and screw wall hooks, plug-in nuts, square-head and hexagon screws, special pins, br

Q200 Plus chipboard screw TX, partial thread Thread: 6,0 Thread: 100 mm Steel zinced, Plastic-Box

Replacement lens caps for MAX Protect your MAX lenses when not in use, or protect the lens that is not shooting when taking shots in HERO mode Includes two MAX spare lens caps Protects your MAX lens. Replace your MAX lens caps if they are damaged or be

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Subminiature process control monitor with red 3,5 digit LED display and 0 - 5 V DC input. Product series: DMR20-0/5 Measuring range: 0 VDC to 5 VDC Display type: LED Colour: Red Number of digits: 3.5 Digit Height: 7,6 mm Power supply type: DC powere

Noiseblocker is the specialist in particularly quiet fans. In order to achieve this, the company relies on maximum quality with low manufacturing tolerances and a high level of technological know-how with German engineering. In addition, the manufacturer

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

Short circuit bar/addressing plug

Noiseblocker is passionate about extremely quiet fans. The Multiframe models in particular, with an innovative housing and suspension, are the flagships in the company’s range. Noiseblocker is expanding the range to include very small fans with the BlackS

Includes a dive housing for the HERO11 Black Mini, mounting buckle and thumb screw Increases the water density of the HERO11 Black Mini from 10-m (without housing) to 60-m depth Protects your GoPro from potential damage from rocks, reefs, coral and othe

Noiseblocker is passionate about extremely quiet fans. The Multiframe models in particular, with an innovative housing and suspension, are the flagships in the company’s range. Noiseblocker is expanding the range to include very small fans with the BlackS

Nickel plated steel construction for strength & easy cleaning. Suitable for use with electric drills at speeds between 200 - 700 rpm.