Miscellaneous - Dsquared2, Einhell, Micro, Romagna Plastic (14)

Pin headers RM: 2.54 mm Variation 12.60 mm — 1X10 — straight • Nominal current: 3.0 A • Nominal voltage: 250 V eff/V DC • Dielectric strength: 500 V eff for 1 minute • Contact material: copper alloy • Insulation material: Thermoplast UL 94 V-0 • Operating

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

The light guide has been designed for the use of type 0805 CHIPLEDs or smaller types and can be strip-mounted in a grid spacing of 5.08 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensures the

Earth connector with blind rivet technology • 2 Poles • Twistproof, vibration-resistant and corrosion-resistant due to internal, rivet-protected contact claws • Direct mounting, no pretreatment of the carrier material surface is required • Time-saving, ea

The Ultra Micro Digital Servo is only 1.5g for small and small models. Available in left (L) or right (R) motor/cable versions. This article is the version: Links Technical data Operating voltage = 3.7 ... 5.0 V. Actuating torque = 0.16 Ncm / 160g @ 5V.

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

Diameter: 24.4 mm, Voltage range: 0.4 - 5.9 V, Speed: 2200 rpm

Jumper 2.54 mm • Design with opening at the top • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour: black • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

Bullet male fully insulated blue 2,5 mm² 5 mm connectors Nylon

The ultra-micro digital servo is only 1.5 g - for small and miniature models. Available in variants with motor/cable on the left (L) or right (R). Item variant: right Technical data Operating voltage: 3.7 - 5.0 V Actuating torque = 0.16 Ncm/160 g @ 5 V A

This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the prin

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu