Miscellaneous - Dsquared2, Einhell, MS-Tech, Papst, Romagna Plastic, Sensor (40)

Practical basic equipment: 2 tool panel walls, including a 28-piece hook range, provide flexibility, visibility and quick access to tools, accessories and other parts. Quick overviews and direct access, whether in the workshop, in the warehouse or even in

• Rigid compression curve for high volume flow at high counterpressure • Innovative fan wheel with winglets for low noise General properties: • Material: Fibreglass-reinforced plastic, fan wheel: PA, housing: PBT • Fully integrated electronic commutation

EC axial fan 230 VAC 50/60 Hz counterclockwise Ball bearing-IP54-Iso.Kl. B Control input 0-10 VDC / PWM Plug

With this set, the IPC 3U 30255, 3U 3416, 4U 4129-N, 4U 4410, 4U 4416, 4U 4420 and 4U 4424 enclosures can be upgraded with PWM-controllable fans. For this purpose, the enclosed cable is connected to the fan backplane and the PWM fan sockets of the motherb

EC radial module RadiCal VBH0225RSLFS 200-240 VAC-50/60 Hz clockwise rotating Ball bearing, IP54, insulation class B Control input 0-10 V / PWM Electronic motor protection Cable 330 mm

• Rigid compression curve for high volume flow at high counterpressure • Innovative fan wheel with winglets for low noise General properties: • Material: Fibreglass-reinforced plastic, fan wheel: PA, housing: PBT • Fully integrated electronic commutation

• AC fan with external rotor shaded-pole motor • Protected against overloading through impedance protection • Metal fan housing and fan blade wheel • Direction of flow: Air outlet over struts • Direction of rotation: right, when viewed from the rotor • El

• Rigid compression curve for high volume flow at high counterpressure • Innovative fan wheel with winglets for low noise General properties: • Material: Fibreglass-reinforced plastic, fan wheel: PA, housing: PBT • Fully integrated electronic commutation

Pin headers RM: 2.54 mm Variation 12.60 mm — 1X10 — straight • Nominal current: 3.0 A • Nominal voltage: 250 V eff/V DC • Dielectric strength: 500 V eff for 1 minute • Contact material: copper alloy • Insulation material: Thermoplast UL 94 V-0 • Operating

Compact fan 172x51 mm 230 VAC-50/60 Hz Förd. V Ball bearing-IP20-I.KL. B TW-design Paintwork: Device black Plug 2.8x0.5 mm n.LV 2053

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

ebm-papst fans have set the standard in electronic cooling for decades. Compact, quiet and highly efficient, the energy-saving fans adapt to cooling needs and can be intelligently networked with the device logic. Radial fans Radial fans are superior high-

EC axial fan 230 VAC 50/60 Hz counterclockwise Ball bearing-IP54-Iso.Kl. B Control input 0-10 VDC / PWM Plug

High-quality, 300 watt server power supply with up to 90% efficiency.

• 92 x 92 mm

The light guide has been designed for the use of type 0805 CHIPLEDs or smaller types and can be strip-mounted in a grid spacing of 5.08 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensures the

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

• with external rotor capacitor motor with thermal overload protection • metal housing and impeller • blowing over jetties

ebm-papst fans have been the benchmark in electronics cooling for decades. Compact, quiet and highly efficient, the energy-saving fans adapt to the cooling situation and can be intelligently networked with the device logic. Axial fans Axial fans are suita

The underbody protection gun is specially designed for the application of underbody protection, sound-absorbing or sealing material

ebm-papst fans have set the standard in electronic cooling for decades. Compact, quiet and highly efficient, the energy-saving fans adapt to cooling needs and can be intelligently networked with the device logic. Axial fans Axial fans are suitable for hig

• Plastic wing material • Seven rotor blades, backward curved, single inlet • With internally switched temperature monitor as motor protection

EC radial module - RadiCal 200-240 VAC-50/60 Hz Ball bearing, insulation class B, IP54 Electronic motor protection Control input 0-10 VDC Cable length 320 mm

•All-metal design with aerodynamically optimized Impeller • Drive by external rotor- Shaded-pole motor • Rotor in two planes dynamically balanced • Fan blade made of sheet steel directly on the surrounding Rotor welded • Direction of rotation on Rotor see

High-quality, 500 watt server power supply with up to 92% efficiency.

Jumper 2.54 mm • Design with opening at the top • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour: black • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

Bullet male fully insulated blue 2,5 mm² 5 mm connectors Nylon

This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the prin

EBM-papst connection cable 610 mm • For AC axial fans 119 x 119 mm • With wire end ferrules • Length: 610 mm

Short circuit bar/addressing plug

FlowGrid preguide grid 119x119 mm Glass fiber reinforced plastic (PA) Note: Use with axial and diagonal fans The inlet-side preguide grille drastically reduces drastically reduce noise emissions and minimize minimize disturbing low-frequency sounds.

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

EBM-papst protective grille Suitable for fan 80 x 80 mm Material: plastic

The DFG12038B12DN is a 120 mm fan with a high static air pressure of 31.10 mmH2O and an airflow rate of 332.50 cbm/h at 5500 rpm. It is the ideal candidate for use in systems where a lot of heat is generated during operation, such as when a large number o

•Plastic wing material • Seven rotor blades, backward curved, single inlet • With internally switched temperature monitor as motor protection

ebm-papst fans have set the standard in electronic cooling for decades. Compact, quiet and highly efficient, the energy-saving fans adapt to cooling needs and can be intelligently networked with the device logic. Radial fans Radial fans are superior high-

•All-metal design with aerodynamically optimized Impeller • Drive by external rotor- Shaded-pole motor • Rotor in two planes dynamically balanced • Fan blade made of sheet steel directly on the surrounding Rotor welded • Direction of rotation on Rotor see

ebm-papst fans have set the standard in electronic cooling for decades. Compact, quiet and highly efficient, the energy-saving fans adapt to cooling needs and can be intelligently networked with the device logic. Axial fans Axial fans are suitable for hig