Miscellaneous - Dsquared2, Einhell, MS-Tech, PowerPlus, Romagna Plastic, Sensor (50)

This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the prin

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

Short circuit bar/addressing plug

Nickel plated steel construction for strength & easy cleaning. Suitable for use with electric drills at speeds between 200 - 700 rpm.

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

The DFG12038B12DN is a 120 mm fan with a high static air pressure of 31.10 mmH2O and an airflow rate of 332.50 cbm/h at 5500 rpm. It is the ideal candidate for use in systems where a lot of heat is generated during operation, such as when a large number o

Pulse Measurements with Power Sensor for FPH handheld spectrum analyzer (unregistred software license).

Adapter plate which is connected on the bottom of a CarryMore unit and links together the unit with a power tool box.

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 4.5 x 60, blue galvanised steel, 1x sliding, VE 200 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

Advanced Analysis option for Rohde & Schwarz Power Analyzer HMC8015 (unregistered software license).