Miscellaneous - Dsquared2, Epson, GoPro, Logic, Lucide, Noiseblocker, One For All, Sensor (245)

Flat + Curved Adhesive Mounts Attach your GoPro to curved and flat surfaces with these industrial-strength waterproof adhesive mounts. Can be removed by heating the adhesive bond with a hair dryer then peeling off the mount. Compatible with a wide variet

Noiseblocker is the specialist in particularly quiet fans. In order to achieve this, the company relies on maximum quality with low manufacturing tolerances and a high level of technological know-how with German engineering. In addition, the manufacturer

Rigid brass housing + dual ball bearing = longer service life This fan has a sturdy brass housing, making it a reliable product, and two ball bearings inside the brass housing to extend the life of the fan. Together, they make for a high-quality and reli

This model has the same features as the WF-7830DTWF, but it handles sizes up to A3+ and also offers a 50-sheet rear paper feeder and a larger display (10.9-cm touchscreen).

Noiseblocker is the specialist in particularly quiet fans. In order to achieve this, the company relies on high quality with low manufacturing tolerances and a high level of technological know-how with German engineering. In addition, the manufacturer als

The damping system that is integrated in the suspension in this fan series absorbs vibrations between the fan and holder, eliminating the need for additional decoupling. The integrated damping system does not change the installation dimensions of the fan,

Noiseblocker is the specialist in particularly quiet fans. In order to achieve this, the company relies on maximum quality with low manufacturing tolerances and a high level of technological know-how with German engineering. In addition, the manufacturer

Rigid brass housing + fluid dynamic bearing = PERFECT This IceGALE® fan has a sturdy brass housing, making it a reliable product, and a fluid dynamic bearing that reduces the noise level and thus ensures quiet operation. Automatic START/STOP function Cr

Noiseblocker is the specialist in particularly quiet fans. In order to achieve this, the company relies on high quality with low manufacturing tolerances and a high level of technological know-how with German engineering. In addition, the manufacturer als

Earth connector with blind rivet technology • 2 Poles • Twistproof, vibration-resistant and corrosion-resistant due to internal, rivet-protected contact claws • Direct mounting, no pretreatment of the carrier material surface is required • Time-saving, ea

Camera clip + 360° rotation + magnetic base Includes magnetic swivel clip, mounting buckle and thumb screw Easily clip your GoPro onto backpack straps, equipment and more to capture unique perspectives. The built-in magnet sticks to metal objects, such

80 mm 4-pin PWM black cable sheath Technical data: Fan dimensions (H x W x D): 80 x 80 x 25 mm Weight (retail): 87 g Weight (fan): 69 g Nominal voltage: 12 V DC Nominal current: 0.16 A Air flow: 21.15 - 58.19 m³/h 12.45 - 34.25 cfm Fan speed: 800

Buy this printer between September 15, 2024 and January 31, 2025 and request €30/CHF30 cashback from the manufacturer. The terms and conditions can be found in the data sheets. DIN A4 multifunction WLAN ink tank printer, with an included supply of ink for

The NF-A12x25r is the round frame version of Noctua's award-winning 120-mm flagship model NF-A12x25. Its round shape makes it ideal for use on low-profile dual-tower CPU coolers such as the NH-D12L, as well as for other applications where space constraint

Optimal performance in every situation Hydro bearing fan Airflow-optimized rotor blades The Xilence Performance C Series excels with an extraordinary price-performance ratio and a very good proficiency combined with a low noise developement. The black a

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

Connects to a Windows PC via USB User-friendly Programming device compatible with all Superior remote controls, designed for the professional and healthcare sectors. WEIGHT: 104 g DIMENSIONS: 17.0 x 4.8 x 1.5 cm POWER: USB port on a Windows PC

Rigid brass housing + fluid dynamic bearing = PERFECT This IceGALE® fan has a sturdy brass housing, making it a reliable product, and a fluid dynamic bearing that reduces the noise level and thus ensures quiet operation. Automatic START/STOP function Cr

Compatible ink ribbon suitable for EPSON LQ590.

Includes USB pass-through door for the HERO11 Black Mini and USB-C cable A hole in the door lets you connect your HERO11 Black Mini to an external power source to significantly extend the shooting time A specially designed cable/pass-through seal makes

The NF-A12x15 is a highly optimised silent 120x15-mm fan in premium quality, which uses pioneering aerodynamic design measures such as Flow Acceleration Channels and Noctua's AAO frame system. Thanks to its slim depth of only 15 mm, the NF-A12x15 is perfe

Controls devices from over 1000 different manufacturers Control up to 8 devices with just one remote control Controls TVs, DVD players, VCRs, satellite receivers (DVB-T2/-S2/-C), amplifiers and much more Quick and easy set-up Flexible learning function

Jumper 2.54 mm • Design with opening at the top • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour blue • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

Reduced noise levels Optimised air flow Rotor blades in special finish CHIEFTEC's flagship from its fan range. In a classic black design and with a powerful drive, the fan is suitable for all tasks in which a large air volume needs to be recirculated as

Schwarzweißdrucker mit Tintentanksystem Mit diesem EcoTank-Drucker mit Wi-Fi können Sie viel sparen. Er ist schnell, kann viel Tinte aufnehmen und verfügt über beidseitigen Druck. beidseitiger Druck Druckvolumen von bis zu 11.000 Seiten USB, Wi-Fi und

Noiseblocker is the specialist in particularly quiet fans. In order to achieve this, the company relies on maximum quality with low manufacturing tolerances and a high level of technological know-how with German engineering. In addition, the manufacturer

PWM (Pulse Width Modulation) technology Ball bearing mounted Copper core The flagship of CHIEFTEC's fans offers everything that distinguishes a modern fan. The high-quality ball bearing allows the 120-mm rotor to be turned almost silently and the revolu

Includes a rotating mount and wrist strap Rotate your camera 360° or tilt it up and down, without having to remove it Can be used in and out of water Suitable for many different adult sizes Buckle up and start shooting Attach your GoPro to your hand o

Compatible main devices The following models are compatible with one or more items from this range. For more information, refer to the appliance manual. SureColor SC-P900 SureColor SC-P700

The NF-A12x15 has received numerous awards and recommendations from international hardware websites and magazines and has established itself as a benchmark for 120-mm slim fans in premium quality. In the chromax.black.swap edition, the unique silent cooli

Controls up to 4 devices Large buttons for greater convenience Sliding cover to protect the buttons Metal pendant The most popular self-learning universal remote control for gates, now in an even more attractive enclosure. Two versions: 2 or 4 keys dep

The NF-A15 has received more than 100 awards and recommendations from international hardware websites and magazines and is one of Noctua's most renowned and popular 140-mm fan models. With its 150mm-wide round frame and the mounting holes of the 120-mm st

Jumper 2.54 mm • Short design with top opening • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour: black • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

Sensor/actuator connection cable M12, A-coded, 8-pin, M12 plug straight - free cable end, PUR, black, unshielded . Flexible, silicone and halogen-free control cable with high mechanical strength. The cable is resistant to chemicals, hydrolysis and microb

The HERO12 Black Creator Edition is an all-in-one powerhouse for content creators, making vlogging, filming and live streaming easier than ever. With high-quality 5.3K60 videos and Emmy award-winning HyperSmooth 6.0 video stabilisation, you have all the t

The NF-A20 is a highly optimised silent 200-mm fan in premium quality. Thanks to its AAO (Advanced Acoustic Optimisation) framework system and advanced aerodynamic design measures such as Flow Acceleration Channels, the NF-A20 offers the outstanding silen

The Seki® One remote control convinces users with the possibility of simple and above all hygienic cleaning. The membrane keypads has no gaps or edges and the lockable battery cover has a suitable seal to withstand even the largest glass of water. The Sek

Reduced noise levels Optimised air flow Rotor blades in special finish The 92 mm fan for long-term use. The developers used the proven abrasive fabric structure when developing the rotor surface finish. The result is impressive: it generates an almost p

A sleek and portable mini extension pole and tripod, ideal for all your on-the-go activities Shorty is a grab-and-go mini extension pole and tripod. Its compact design makes it ideal to take along for any casual activity. Toss it in your pocket on your w

Keep your camera and equipment safe in this elegant, travel-friendly case Soft, weather-resistant outer shell The flexible way to house your camera and accessories Zipped compartment and flexible interior divider with rip-tape fastening Soft carry han