Miscellaneous - Dsquared2, General Electric, Romagna Plastic, Sensor (26)

CHIP LEDs, type G0603, Length: 1.6 mm Width: 0.8 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing. Manufacturer no.: KP-1608YD

Flashing LED, 5 mm, yellow, Coloured diffused housing. Beam angle: 60° VF = 5 V (590 nm)/5 - 32 mcd GaAsP/GaP Manufacturer no.: L-56BYD

Practical basic equipment: 2 tool panel walls, including a 28-piece hook range, provide flexibility, visibility and quick access to tools, accessories and other parts. Quick overviews and direct access, whether in the workshop, in the warehouse or even in

The NA-SAVP6 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP6 anti-vibration pads for up to 2 compatible 200-mm fans (see compatibility information). The anti-vibration pads, made from extra-soft silicone, reduce the transmission

Pin headers RM: 2.54 mm Variation 12.60 mm — 1X10 — straight • Nominal current: 3.0 A • Nominal voltage: 250 V eff/V DC • Dielectric strength: 500 V eff for 1 minute • Contact material: copper alloy • Insulation material: Thermoplast UL 94 V-0 • Operating

LED with low power consumption, 2 mA. 5 mm, yellow-coloured housing, diffused Beam angle: 60° (590 nm)/0.8 - 3.2 mcd Manufacturer no.: L-53LYD

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

The light guide has been designed for the use of type 0805 CHIPLEDs or smaller types and can be strip-mounted in a grid spacing of 5.08 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensures the

Earth connector with blind rivet technology • 2 Poles • Twistproof, vibration-resistant and corrosion-resistant due to internal, rivet-protected contact claws • Direct mounting, no pretreatment of the carrier material surface is required • Time-saving, ea

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

CHIP LEDs, type G0805, Length: 2.0 mm Width: 1.25 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing.

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

The NA-SAVP1 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP1 anti-vibration pads for up to 2 compatible 120/140-mm fans. The NA-AVP1 anti-vibration pads are compatible with the following Noctua fans: NF-A14 FLX NF-A14 PWM chromax

The NA-SAVP3 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP3 anti-vibration pads for up to 2 compatible 140-mm round frame fans such as the NF-A15 (see compatibility information). The anti-vibration pads, made from extra-soft sil

Jumper 2.54 mm • Design with opening at the top • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour: black • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

KM-23YD-F Yellow SOT-23 Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Features: • Yellow (GaAsP/GaP) • Lens Type: Yellow Diffused • SOT-23 package surface mount LED

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

SMD Mini PLCC2 reflector LED for all kind of soldering methods usable, especially if customers like to have an LED with metal leadframe, but in a very small housing

Bullet male fully insulated blue 2,5 mm² 5 mm connectors Nylon

This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the prin

Ultra-bright LED, 3 mm, yellow. Coloured housing, transparent. Beam angle: 50° (590 nm)/10 - 50 mcd

Short circuit bar/addressing plug

CHIP LEDs, type G1206, Length: 3.2 mm Width: 1.6 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing. Manufacturer no.: KP-3216YD

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

SMD LED with dome lens, yellow, 568 nm, 300 mcd Clear housing Radiation angle: approx. 50° Dimensions (L x W x H): 3.2 x 1.6 x 1.9mm Manufacturer no.: KPTD-3216SYC

Duo-LED, 3 mm, 2-pin, colour change via polarity reversal. red/yellow Colourless housing, diffused Beam angle: 60° 20 mA 8 - 40 mcd