Miscellaneous - Dsquared2, iRobot, Trend (113)

Female Header Single Row, 2,00mm (0,079'') ,Straight Dip type profile=4,30mm, 2x6-pin

TrueRMS mini current clamp meter UT210B. Functions and characteristics: Current measurement up to 200 A AC TRMS true RMS measurement Current clamp for conductors up to 17 mm in diameter Non-contact voltage testing Data hold Min/max function Relative

The UTD2152CL offers an easy-to-use interface with simple functions. The AUTO button allows you to quickly view the waveform and device settings. It has two analogue channels, a high-resolution LCD display (800x480) and USB support for storage devices or

Passive high-voltage probe The UT-P20 is a high-voltage probe with low input capacitance that has been designed and calibrated for use with devices that have an input resistance of 1 MOhm at 20 pF input capacitance. However, it is also possible to compens

PIC12F675 8-Pin Flash-Based 8-Bit CMOS Microcontroller High-Performance RISC CPU: • Only 35 Instructions to Learn - All single-cycle instructions except branches • Operating Speed: - DC – 20 MHz oscillator/clock input - DC – 200 ns instruction cycle • Int

Key features Enhanced mid-range core with 49 commands, 16 stack layers Flash program memory with self-read/write function Extreme Low Power (XLP) IDLE and DOZE power saving modes Peripheral Module Shutdown (PMD) Peripheral Pin Selection (PPS) 4x 10-

The light guide has been designed for the use of type 0805 CHIPLEDs or smaller types and can be strip-mounted in a grid spacing of 5.08 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensures the

For fast and stable connection of two aluminium profiles. Self-forming thread without chip formation.

14/20-Pin 8-Bit Advanced Analog Flash Microcontrollers High-Performance RISC CPU • C Compiler Optimized Architecture • Only 49 Instructions • Up to 14 Kbytes Linear Program Memory Addressing • Operating Speed: - DC – 32 MHz - DC – 125 ns instruction cycl

Earth connector with blind rivet technology • 2 Poles • Twistproof, vibration-resistant and corrosion-resistant due to internal, rivet-protected contact claws • Direct mounting, no pretreatment of the carrier material surface is required • Time-saving, ea

UPO1000CS series The UPO1000CS series is a multifunctional, cost-effective digital phosphor oscilloscope. It can be used in electronic and electrical design, troubleshooting, education and industrial design. The UPO1000CS series uses parallel digital sig

The UTD2000CEX+ offers an advanced trigger mode, 34 types of automatic parameter measurement and common mathematical operations. Panel operation is optimised, which significantly increases work efficiency, and the measurement requirements of complex signa

Insulated BNC adapter plug for 4-mm safety plugs. 500 V/cat. I

The new multifunctional voltage tester series UT18 from Uni-T enables the quick and easy testing of DC and AC voltages and the testing of the phase rotation direction (rotating field test). All types of the series are furthermore equipped with a switchabl

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

14-Pin, Flash-Based 8-Bit CMOS Microcontrollers High-Performance RISC CPU: • Only 35 Instructions to Learn - All single-cycle instructions except branches • Operating Speed: - DC – 20 MHz oscillator/clock input - DC – 200 ns instruction cycle • Interrupt

i-TOOL NANO MK2 with micro-high-performance heating element Handy, ultra-light soldering iron Same heating element as the i-TOOL MK2 Suitable for i-CON NANO MK2 soldering station i-TOOL NANO MK2 soldering iron with 80 W micro high-power heating element: T

PIC16F870/871 28/40-Pin, 8-Bit CMOS FLASH Microcontrollers Microcontroller Core Features: • High performance RISC CPU • Only 35 single word instructions to learn • All single cycle instructions except for program branches which are two-cycle • Operating s

Uni-Trend - sound level meter This new digital sound level meter with a high accuracy of +/- 1.5dB and a large, backlit and well-organised digital LCD display with bar graph is perfectly suited for use in all relevant areas. Use the measuring device for n

The UTD1050CL is an economical handheld digital storage oscilloscope with 50-MHz bandwidth and a sampling rate of 2000 MSa/s. It integrates an oscilloscope, a multimeter, a trend chart and a waveform recording function. The compact and portable design pro

The probes from the UT-P00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits descr

Network card for the Ersa I-CON Trace

R/C pin gauge for SMD components. This device is ideal for measuring SMD components quickly, easily and precisely. The tweezers are equipped with a 180° rotating device which makes operation and reading much easier. Ideal for use in the service and train

The UTE9800+ series is a cost-effective, portable and intelligent measuring instrument for electrical parameters. It is a multifunctional measuring device that integrates voltage, current, power, power factor and frequency. Offering excellent value for mo

Especially when measuring temperatures at measuring points far away from each other, the testo 115i makes the application much easier - thanks to the wireless connection to the Smartphone or Tablet. When used together with the testo 549i pressure gauge, i

PIC16F627A Description: This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip’s powerful PIC® architecture into an 18-pin package and is upwards c

Professional soldering station for industry, test field and development applications. Digital soldering station with ergonomic, powerful 150 W i-TOOL MK2 soldering iron Motion sensor in the soldering iron for energy-saving and tip-friendly standby functio

Replacement heating element for the I-Tool NANO MK2 soldering irons

UTG1022X Die UTG1000X-Serie bietet eine präzise und stabile Wellenformausgabe mit einer Auflösung von nur 1µHz. Es handelt sich um einen wirtschaftlichen, leistungsstarken und multifunktionalen Funktions-/Arbiträrwellenformgenerator. Es können genaue, st

8-Pin, Flash-Based 8-Bit CMOS Microcontrollers High-Performance RISC CPU: • Only 35 Instructions to Learn - All single-cycle instructions except branches • Operating Speed: - DC – 20 MHz oscillator/clock input - DC – 200 ns instruction cycle • Interrupt C

The UT8804E is a desktop digital multimeter with auto-ranging, 59,999 counts and true RMS measurement, a frequency response of 100 kHz and a 4.3-inch TFT LCD. It features a VFC low-pass filtering function that reduces the impact of high-frequency signals

Female Header Single Row, 2,00mm (0,079'') ,Straight Dip type profile=4,30mm, 2x2-pin

The UPO1000 series of the digital phosphorus oscilloscopes utilises UNI-T 3D Ultra Phosphor 2.0 technology and offers a new design upgrade as well as features such as deep storage, a high waveform capture rate, real-time waveform recording and playback an

Female Header Double Row, 2,00mm (0,079'') ,Straight Dip type profile=4,30mm, 2x16-pin

2-way splitters 5…1218 MHz High return loss For multimedia-use In- and outputs hum-decoupled High intermodulation suppression Screening factor Class A +10 dB, according to EN 50083-2 Return loss and isolation according to VFKD TS 220

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

Jumper 2.54 mm • Design with opening at the top • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour: black • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

The UPO1000 series of the digital phosphorus oscilloscopes utilises UNI-T 3D Ultra Phosphor 2.0 technology and offers a new design upgrade as well as features such as deep storage, a high waveform capture rate, real-time waveform recording and playback an

i-TOOL PICO MK2 soldering iron with max. 80 W micro high-power heating element: The new Tip'n'Turn technology enables faster and safer tip changes by using a new bayonet mount. In addition to improved ergonomics, the 142 tip series offers improved heat tr

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi