Miscellaneous - Dsquared2, M-Tech, Printer Maniak, Romagna Plastic, Sensor (24)

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 5 lengths Strip width: 6 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

Waste toner container for Canon iPF TC-20

Practical basic equipment: 2 tool panel walls, including a 28-piece hook range, provide flexibility, visibility and quick access to tools, accessories and other parts. Quick overviews and direct access, whether in the workshop, in the warehouse or even in

Suitable for wire cross-section 6 - 16 mm² Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 2 lengths Diameter of sheathed cable: 5.9 - 8.3 mm Method of attachment: push onto wire

Pin headers RM: 2.54 mm Variation 12.60 mm — 1X10 — straight • Nominal current: 3.0 A • Nominal voltage: 250 V eff/V DC • Dielectric strength: 500 V eff for 1 minute • Contact material: copper alloy • Insulation material: Thermoplast UL 94 V-0 • Operating

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

Nous F4 Smart RGBIC LED strip, 5 m If you are looking for a smart home device that can transform your living space with stunning lighting effects, the Nous F4 5m Smart RGBIC WIFI LED Strip is just what you are looking for. This product is a smart WIFI LED

• Very sturdy metal/plastic frame • Load capacity: Up to 80 kg • Printer level (W x D: 68 x 50 cm) • Intermediate level (W x D: 59 x 44 cm) • Base plate (W x D: 59 x 31.5 cm) • Space between levels: 31.5 cm each • Solid feet with level screws to stop the

The light guide has been designed for the use of type 0805 CHIPLEDs or smaller types and can be strip-mounted in a grid spacing of 5.08 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensures the

Earth connector with blind rivet technology • 2 Poles • Twistproof, vibration-resistant and corrosion-resistant due to internal, rivet-protected contact claws • Direct mounting, no pretreatment of the carrier material surface is required • Time-saving, ea

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

More suitable: for wire cross-sections 0.75 - 1.5 mm² Marking method: thermal transfer Label: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 3 lengths Label surface: 5 x 23 mm Diameter of sheathed cable: 2.3 - 2.8 mm Met

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 9 lengths Strip width: 3 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

Jumper 2.54 mm • Design with opening at the top • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour: black • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

Suitable for wire cross-section 2.5 - 6 mm² Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 3 lengths Label surface: 7 x 26 mm Diameter of sheathed cable: 3.3 - 4.9 mm Method of a

Bullet male fully insulated blue 2,5 mm² 5 mm connectors Nylon

This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the prin

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 5 lengths Strip width: 5 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

• Sturdy metal/plastic frame • Printer level (W x D: 68 x 50 cm) • Intermediate level (W x D: 58.5 x 44 cm) • Base plate (W x D: 57.5 x 31.5 cm) • Moves on four castors, two of which are lockable • Level screws stop the printer stand tipping sideways • Ma

Short circuit bar/addressing plug

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

• High-gloss chrome-plated metal reflector • Outside reflector • Without series resistor • Bi-colour • Insertion diameter: 6,2 mm • Protection rating: IP40 • Front panel thickness max.: 5.5 mm