Miscellaneous - Dsquared2, Romagna Plastic, Sensor, V-Tac (42)

RAFI indicators • With integral LED • 10 mm • Flat bezel • 24 - 28 V

WERMA LED flash light green 24 V AC/DC Optical signal element • Clear signalling even in low light conditions • Service life: 50,000 h • Flash frequency approx. 1 Hz For the WERMA modular system, you need the following elements: • Signal element(s) • Conn

• High power DC COB (Chip-On-Board) LED, JU1215 series • High efficiency • Multi-Chip solution • RoHS compliant • Energy Star/ANSI compliant binning structure

Multi-Look® LED lamp for BA9s base Multi-Look® LED lamp with single chip. By sealing the chip LED, both an increase of the beam angle and a high mechanical protection are achieved. The lamps are therefore shock and vibration resistant. Special combination

Pin headers RM: 2.54 mm Variation 12.60 mm — 1X10 — straight • Nominal current: 3.0 A • Nominal voltage: 250 V eff/V DC • Dielectric strength: 500 V eff for 1 minute • Contact material: copper alloy • Insulation material: Thermoplast UL 94 V-0 • Operating

• High power DC COB (Chip-On-Board) LED, JU1215 series • High efficiency • Multi-Chip solution • RoHS compliant • Energy Star/ANSI compliant binning structure

RAFI indicators • With integral bulb • 10 mm • Round bezel • 24 - 28 V

RAFI indicators • With integral bulb • 10 mm • Arrow-shaped bezel • 24 - 28 V

RAFI indicators • With integral LED • 10 mm • Flat bezel • 24 - 28 V

Filament bulb, 12 V / 5 W Bulb • 12 V / 5 W • 42 mm For the following part numbers: WERMA 200 xxx xx WERMA 203 xxx xx WERMA 641 xxx xx WERMA 815 xxx xx

RAFI indicators • With integral LED • 10 mm • Flat bezel • 24 - 28 V

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

RAFI indicators • With integral bulb • 10 mm • Square bezel • 24 - 28 V

RAFI indicators • With integral LED • 10 mm • Flat bezel • 24 - 28 V

LED G53 AR111 x 67 12 V 690 lm 12 W 927 35° AC/DC Grey Dim

Stable SMD technology which makes the product more reliable and durable Uses 80% less energy and lasts 20 times longer than Standard Bulbs

The light guide has been designed for the use of type 0805 CHIPLEDs or smaller types and can be strip-mounted in a grid spacing of 5.08 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensures the

Earth connector with blind rivet technology • 2 Poles • Twistproof, vibration-resistant and corrosion-resistant due to internal, rivet-protected contact claws • Direct mounting, no pretreatment of the carrier material surface is required • Time-saving, ea

WERMA red LED flash light, 24 V DC Optical signal element • Clear signalling even in low light conditions • Service life: 50,000 h • Flash frequency approx. 1 Hz (double flash) For the WERMA modular system, you need the following elements: • Signal elemen

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

RAFI indicators • With integral bulb • 10 mm • Round bezel • 24 - 28 V

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

• High power DC COB (Chip-On-Board) LED, JU1215 series • High efficiency • Multi-Chip solution • RoHS compliant • Energy Star/ANSI compliant binning structure

OSRAM HALOSTAR® ECO STAR Product benefits • Brilliant ECO accent lighting • Significantly lower CO2 emissions • High light yield compared to standard lamps • Brilliant small dimensions for revolutionary new lighting designs • For operation in open light

DC/DC LED driver from the LDD-L series. • Step-down DC/DC converter • Constant current output • Wide input voltage range • Efficiency: up to 95% • Built-in EMI filter (in accordance with EN55015 and FCC Part 15) • Integrated PWM and remote ON/OFF controll

Flat LED, round special form, 3 mm, green. Manufacturer no.: L-424GDT

RAFI indicators • With integral bulb • 10 mm • Arrow-shaped bezel • 24 - 28 V

RAFI indicators • With integral neon bulb • 10 mm • Arrow-shaped bezel • 230 V

Filament bulb, 24 V / 5 W Bulb • 24 V / 5 W • 42 mm For the following part numbers: WERMA 200 xxx xx WERMA 203 xxx xx WERMA 641 xxx xx WERMA 815 xxx xx

Jumper 2.54 mm • Design with opening at the top • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour: black • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

WERMA red LED flashing light 24 V AC/DC Optical signal element • Clear signalling even in low light conditions • Service life: 50,000 h • Flash frequency approx. 1 Hz For the WERMA modular system, you need the following elements: • Signal element(s) • Con

Filament bulb, 230 V / 5 W Bulb • 230 V / 5 W • 42 mm For the following part numbers: WERMA 200 xxx xx WERMA 203 xxx xx WERMA 641 xxx xx WERMA 815 xxx xx

Bullet male fully insulated blue 2,5 mm² 5 mm connectors Nylon

RAFI indicators • With integral bulb • 10 mm • Square bezel • 24 - 28 V

RAFI indicators • With integral bulb • 10 mm • Arrow-shaped bezel • 24 - 28 V

This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the prin

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

• High power DC COB (Chip-On-Board) LED, JU1215 series • High efficiency • Multi-Chip solution • RoHS compliant • Energy Star/ANSI compliant binning structure

Red neon bulb With built-in resistor, 230 V