Miscellaneous - Dsquared2, Romagna Plastic, Spring Light, V-Mark (26)

Multipower driver with dip-switch for selecting output current and output voltage This SELV 60 V JOLLY US 32 LED driver is a multipower device and the desired power can be set via DIP setting. With this JOLLY device it is possible to make settings from mi

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 2,0m

Practical basic equipment: 2 tool panel walls, including a 28-piece hook range, provide flexibility, visibility and quick access to tools, accessories and other parts. Quick overviews and direct access, whether in the workshop, in the warehouse or even in

With the new LUXULA mounting clips, you can expand your standardised LED panels in sizes 60x60 cm, 62x62 cm or 120x30cm for ceiling installation, without being necessarily dependent on standard grid ceilings. In this way, the LED panels can also be easily

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 30,0m

Pin headers RM: 2.54 mm Variation 12.60 mm — 1X10 — straight • Nominal current: 3.0 A • Nominal voltage: 250 V eff/V DC • Dielectric strength: 500 V eff for 1 minute • Contact material: copper alloy • Insulation material: Thermoplast UL 94 V-0 • Operating

A light fixture holder made of galvanised spring steel, suitable for LEANLED and SIGNALED light fixtures. The rear aluminium profile of the LED light fixture is simply clipped into the mounted spring clamps and thus withstands even strong vibrations. The

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

Multipower driver with dip switch for selecting the output current This SELV 60 V JOLLY DALI 32 LED driver is a multipower device and the desired power can be set via DIP setting. With this JOLLY device it is possible to make settings from minimum 250 mA

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 5,0m

The light guide has been designed for the use of type 0805 CHIPLEDs or smaller types and can be strip-mounted in a grid spacing of 5.08 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensures the

Earth connector with blind rivet technology • 2 Poles • Twistproof, vibration-resistant and corrosion-resistant due to internal, rivet-protected contact claws • Direct mounting, no pretreatment of the carrier material surface is required • Time-saving, ea

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

Tangle-free L-Type Diamond Series Data Cable designed with innovative L-type tip preventing cable damage and does not get in the way when using the device while charging. . High speed transmission Fast Sync - Fast Charging (2.4A) Equipped with high qualit

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 15,0m

This Nedis 20 W USB-C™ fast car charger with power delivery allows you to charge any USB and USB-C™ device from your car's power outlet. The included USB-C™ cable with Lightning connector makes fast charging your iPhone easy. You can charge an iPhone 8 or

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 1,0m

Jumper 2.54 mm • Design with opening at the top • Nominal current 3.0 A • Contact material phosphor bronze • Finish contact Au • Colour: black • Insulation material Thermoplast UL 94V-0 • Operating temperature: -40 °C to +105 °C

This vertical light guide system with a grid spacing of 2.54 mm delivers light in the form of a 2 x 5 mm LED to the front panel. The light guide is held in place on the printed board with press-in lugs. The light guides are used in conjunction with SMD Mi

Subminiature incandescent lamp with cable

Bullet male fully insulated blue 2,5 mm² 5 mm connectors Nylon

This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the prin

Short circuit bar/addressing plug

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

Mounting clips for LED panels The clips allow easy mounting of LED panels. They are attached to the back of the LED panel and can be easily mounted on almost any surface. The clips are compatible with many models of backlight and sidelight panels thanks t