Miscellaneous - Durable, Knipex, Romagna Plastic, Sensor (345)

head polished, handles with multi-component grips

KNIPEX combination pliers produced from special tool steel, oil-hardened, polished head. With 2-component handles for ergonomic working. Blades additionally inductively hardened. Cutting force: Soft wire up to 3.1 mm in diameter Hard wire up to 2.0 mm in

Identical to KN 77 32 115 yet with dissipative handle casings for electro- static protection.

Assembly Pliers for gripping, adjustment and assembly work in hard to reach areas thanks to slim, very long design deep parts can be easily reached using the slim, half-round tips careful yet reliable gripping, holding and guiding of small copper pipes, s

For crimping wire end ferrules according to DIN 46228 parts 1 + 4 from 0.25 to 16 mm² • Improved transmission ratio for 30% easier crimping • Light and slim design • Crimping in marked half-round profiles for safe • connection of the sleeve and conductor

round tips, approx. 3.5 mm wide straight pattern knurled gripping surfaces serrated handles

Single-handed crimping lever pliers from KNIPEX For non-insulated blade receptacles from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions

KNIPEX precision electronics gripping pliers, flat-wide Smooth, low-friction movement owing to precision-ground, play-free screwed joint. Polished in glare-free finish with ergonomic 2-component grip casings and smooth opening spring. The shape, choice of

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

Side cutters for universal use, with inductively hardened precision cutting edges. - Chrome-plated head - Standard bevel - Length 160 mm - Plastic sleeves VDE-insulated 1000 V, IEC 900 Cutting force: Soft wire up to 4.0 mm in diameter Hard wire up to 2.0

Pantograph pliers produced from oil-hardened vanadium steel. VDE-insulated handles, 1000 V in accordance with IEC 60900/DIN EN 60900. Long flat-round jaws with serrated gripping surfaces with straight form. Blades additionally inductively hardened for med

Self-adjusting crimping pliers with front entry for DIN-compliant crimping of wire end ferrules in a profile from 0.08-10 mm². For larger contact surfaces, wire end ferrules are crimped in square profile. In cramped spaces, such as in switch cabinets, wir

shaped to grip horizontal cylindrical components of 1.0 mm dia. smooth gripping surfaces serrated handles

Electrician's gloves according to DIN-EN 60903. Protection when touching live parts. Size 10. VDE-tested 1000 V.

1 x replacement cutter for KN 12 62 180

For cutting composite pipes Ø 12.0 to 25.0 mm and for cutting flexible protective pipes Ø 18.0 to 35.0 mm without damaging the inner pipe. Possibility of attaching a calibration mandrel e.g. for Geberit composite pipes Ø 11.5 and 15.0 mm.

Blade for KN 94 15 215 Content: 10 pieces

Combination pliers, lightweight, with cutting edges for hard and soft wire, long cutting edges for thicker cable. Blades additionally inductively hardened. Length: 160 mm Head chrome-plated, handles VDE-insulated, 1000 V. Cutting force: Soft wire up to 2.

KNIPEX electronics side cutters, pointed head, with bevel, ESD Design electrically dissipative. For use on electrostatically sensitive components. Smooth, low-friction movement owing to precision-ground, play-free screwed joint. Polished in glare-free fin

Compact side cutters, high ratio, compact and lightweight. Powerful and precise. Cuts the finest wires as well as multi-strand wire and hard piano wire. Box joint: Maximum stability at low weight, double-bearing pivot axle for maximum, continuous stresses

Needle-Nose Combination Pliers handy use when working in confined areas thanks to slim head design and pointed jaws (anti-twist) Gripping surfaces with special convex contour on one side for secure gripping of flat parts milled groove in the gripping area

Snipe nose pliers with cutter (radio pliers) With inductively hardened blades. Length: 160 mm, curved Chrome-plated head, serrated gripping surfaces. Grip casings VDE-insulated 1000 V/IEC 900. Cutting force: approx. 60 HRC Soft wire up to 2.5 mm in diamet

KNIPEX plastic side cutters Side cutters with surface-ground cutting surfaces without bevel, for smooth truncating of sprues on plastic parts or soft materials such as lead. Vanadium electric steel, oil-hardened and tempered. Polished head, plastic-coated

pliers chrome plated, handles with multi-component grips

Needle-Nose Combination Pliers handy use when working in confined areas thanks to slim head design and pointed jaws (anti-twist) Gripping surfaces with special convex contour on one side for secure gripping of flat parts milled groove in the gripping area