Miscellaneous - Edding, Einhell, iRobot, PowerPlus, Romagna Plastic, Sensor (129)

Tyre marker with bullet tip • Permanent, opaque varnish, low-odour ink • Colour: white • Stroke width: approx. 2.0 - 4.0 mm For marking and labelling tyres and other rubber surfaces. For all things round — the edding tyre marker The edding 8050 tyre mark

The connectors have been developed for use in systems-, control- and electrical equipment engineering. It is the responsibility of the user to check whether the connectors can also be used in other areas of application. To protect against unintentional op

Industrial permanent marker Ideally suited for marking slightly oily and dusty surfaces. • Bullet tip • For industrial use Colour: red Stroke width: approx. 1.5 - 3 mm Filled with smudge-resistant and waterproof ink that is also resistant to etching solut

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.0 mm • Colour: black Cap-off time: up to a few days. The ca

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Flipchart marker with chisel tip Specifically designed to write on flipchart paper. Ink does not bleed through on to the following pages. • Odourless, water-soluble ink • Refillable • Stroke width: approx. 4.0 - 12.0 mm • Colour: black Cap-off time: up to

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

ERSA Multi-TC Power soldering iron with sensor-controlled tip temperature The ERSA Multi-TC is a powerful, robust, temperature-controlled Power soldering iron with sensitive temperature sensor positioned directly under the internally heated soldering tip.

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 1 mm • Replaceable tip • Refillable •

For writing and signing. The nibs are mostly metal-shrouded for protection and guarantee a fine and precise writing result. The roller- balls are also suitable for making carbon copies. Fineliner with plastic nib, water-based ink. Stroke width: 0,6 mm

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: blue Cap-off time: up to a few days. T

The epoxy resin system Casting Resin Plus 90 is a sealing compound that is as clear as glass once hardened.

OHP marker with corrosion-resistant, metal-framed bullet tip For very clear, vivid writing on an overhead projector, also for labelling glass and plastics. • Permanent, waterproof ink • Stroke width: approx. 0.3 mm • Colour: black

Paint marker with bullet tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are particularly lumin

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: black Cap-off time: up to a few days.

Paint marker with metal-framed plastic tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are part

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 0.75 mm • Replaceable tip • Refillable

Unique rotation direction tester for three-phase power supply systems and motors The unique tester Fluke 9062 provides a rotating field and motor rotation indicator display combined with the advantages of non-contact measurement. Fluke 9062 is designed fo

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

8-Pin Flash, 8-Bit Microcontrollers High-Performance RISC CPU: • C Compiler Optimized Architecture • Only 49 Instructions • Operating Speed: - DC – 20 MHz clock input, - DC – 200 ns instruction cycle • Interrupt Capability with Automatic Context Saving •

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Coding pin, for type D, E, F and transition elements I, metal, RAL 7032 (pebble gray)

Flipchart marker with chisel tip Specifically designed to write on flipchart paper. Ink does not bleed through on to the following pages. • Odourless, water-soluble ink • Refillable • Stroke width: approx. 4.0 - 12.0 mm • Colour: Green Cap-off time: up to

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 1 mm • Replaceable tip • Refillable •

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 6.0 x 80, blue galvanised steel, 1x sliding, VE 100 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: Green Cap-off time: up to a few days.

The fineliner is ideal for writing and preparing drawings, scripts, sketches, fashion illustrations and effective layouts. Water-based ink in attractive colours. Fineliner with metal-framed plastic nib, water-based ink. Stroke width: 0,3 mm

Paint marker with metal-framed plastic tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are part

Replacement heating element for the I-Tool Trace, I-Tool PICO MK2 soldering irons

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 0.75 mm • Replaceable tip • Refillable

Microchip PIC controller — high-performance RISC CPU Microchip supports the entire performance range from 8-bit, 16-bit and 32-bit microcontrollers with a powerful architecture, flexible storage technologies and extensive easy-to-use development tools, as

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 5.0 x 50, blue galvanised steel, 1x sliding, VE 200 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

Whether you're planning a road trip or getting out in nature on a camping trip, the Aqiila Powerstation Powerbird S140 is the perfect partner for longer adventures. This powerful and portable power station ensures that you always have plenty of power wher

Premium chisels with self-sharpening effect offer the longest service lifes for the maximum efficiency in terms of results - durable and powerful.

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 3.5 x 35, blue galvanised steel, 1x sliding, VE 1000 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION:

Industry painter with extremely durable and highly opaque colour paste Ideally suited for labelling rough surfaces, dirty materials and rusty metals. • Fade-resistant, smudge-resistant and waterproof once dry • Also marks on clean surfaces underwater • Ti

OHP marker with corrosion-resistant, metal-framed bullet tip For very clear, vivid writing on an overhead projector, also for labelling glass and plastics. • Permanent, waterproof ink • Stroke width: approx. 0.3 mm • Colour: Green