Miscellaneous - Edding, Einhell, Knipex, Romagna Plastic, Sensor (405)

edding 5100 acrylic marker medium moss green Medium acrylic pen for easy, spontaneous painting on light or dark surfaces. Acrylic markers for painting on dark and light surfaces, ideal for materials such as canvas, drawing paper, wood, stone or terracott

Knipex cable knife with ergonomically designed safety handle, interchangeable blade with special cut. With hinged blade guard, integrated in handle, captive. VDE-insulated according to DIN EN 60900 up to 1000 V. Length: 185 mm

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 1 mm • Replaceable tip • Refillable •

Cable knife, VDE-tested 1000 V. Insulated blade backs, with protective cap. Length 180 mm

tool chrome plated, handles with dipped insulation, VDE-tested IEC 60900DIN EN 60900

Tyre marker with bullet tip • Permanent, opaque varnish, low-odour ink • Colour: white • Stroke width: approx. 2.0 - 4.0 mm For marking and labelling tyres and other rubber surfaces. For all things round — the edding tyre marker The edding 8050 tyre mark

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: blue Cap-off time: up to a few days. T

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: black Cap-off time: up to a few days.

tool burnished, handles with multi-component grips

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

Knipex crimping die For KN 97 43. For turned contacts, HTS + Harting.

KNIPEX cable shears with double blade Cuts smoothly and cleanly without crushing. For single and multi-strand copper and aluminium cable. Not suitable for steel wire and hard-drawn copper conductors. KNIPEX cable shears with double blade facilitates cutti

Self-adjusting crimping pliers with side entry for DIN-compliant crimping of wire end ferrules in a profile from 0.08 - 10 mm². Square crimping always ensures optimal contact surfaces. Easy handling, force strengthening, self-releasing lock.

Industrial permanent marker Ideally suited for marking slightly oily and dusty surfaces. • Bullet tip • For industrial use Colour: red Stroke width: approx. 1.5 - 3 mm Filled with smudge-resistant and waterproof ink that is also resistant to etching solut

For Bowden cables and soft wire ropes (including V2A) up to diameter of 3.0 mm Light, clean cut thanks to special cutting edge shape Sickle-shaped cutting edges enclose the cut material and prevent splicing of the wire rope Little force needed owing to

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: blue Cap-off time: up to a few days. T

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.0 mm • Colour: black Cap-off time: up to a few days. The ca

Cable cutter insulated with multi-component casings, VDE-tested 250 mm For cutting copper and aluminium cables, single and multi-wire. Not suitable for steel wire and wire cable. Hardened precision-ground blades. Cuts smoothly and cleanly without crush

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Flipchart marker with chisel tip Specifically designed to write on flipchart paper. Ink does not bleed through on to the following pages. • Odourless, water-soluble ink • Refillable • Stroke width: approx. 4.0 - 12.0 mm • Colour: black Cap-off time: up to

Industry painter with extremely durable and highly opaque colour paste Ideally suited for labelling rough surfaces, dirty materials and rusty metals. • Fade-resistant, smudge-resistant and waterproof once dry • Also marks on clean surfaces underwater • Ti

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

For stripping UTP and STP data cables 4.5 to 10.0 mm in diameter Stripping device for cross-sections of 0.2/0.3/0.8/1.5/2.5/4 mm² Two-level, hinged stripping tool With opening spring and locking pawl Mounting clip for secure storage Housing: Plastic,

For hard wire cables, also suitable for cabling and round steel • Precise, effortless screwed joint • With safety catch Special blade geometry prevents the wire cable fanning out Chrome vanadium high-performance steel, oil-hardened and tempered

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Single-handed crimping lever pliers from KNIPEX For insulated cable shoes from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors • With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

For stripping all standard coaxial cables from 4.8 to 7.5 mm in diameter (such as for TV and satellite reception), also suitable for PVC-Flex 3 x 0.75 mm² With length scale from 5.0 to 20.0 mm Two-level, hinged stripping tool With opening spring and lo

head burnished, handles with multi-component grips

OHP marker with corrosion-resistant, metal-framed bullet tip For very clear, vivid writing on an overhead projector, also for labelling glass and plastics. • Permanent, waterproof ink • Stroke width: approx. 0.3 mm • Colour: black/red/blue/green

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

For writing and signing. The nibs are mostly metal-shrouded for protection and guarantee a fine and precise writing result. The roller- balls are also suitable for making carbon copies. Fineliner with plastic nib, water-based ink. Stroke width: 0,6 mm

Knipex electronics pliers assortment In synthetic leather case. 7-piece tool kit for working on electronic components. Contents: 3x electronics gripping pliers 115 mm (3512115, 3522115, 3532115) 2x electronics side cutters 115 mm (7702115, 7742115) 1x ang

Single-handed crimping lever pliers from KNIPEX For wire end ferrules from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with exce

Automatic stripping pliers: 2.5 - 10.0 mm² These innovative patented universal stripping pliers are suitable for precise, damage-free stripping and unsheathing of all electronic single and multi-conductor cabling, in particular also with PTFE insulation.

KNIPEX side cutters for universal use, with inductively hardened precision blades, polished head, standard bevel. Length: 180 mm Plastic sleeves VDE-insulated 1000 V, IEC 900 Cutting force: Soft wire up to 2.5 mm in diameter, Hard wire up to 4.0 mm in dia

pliers chrome plated, handles with multi-component grips