Miscellaneous - Edding, Knipex, Romagna Plastic (333)

Permanent marker with chisel tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 4.00 - 12.00 mm • Replaceable tip • Re

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: red Cap-off time: up to a few days. Th

edding 8055 outdoor marker - withstands nature How can you mark items, tools or utensils that are constantly used outdoors? The edding 8055 outdoor marker answers this question. Its permanent, weather-resistant, paint-like ink is suitable for almost all s

pliers chrome plated, handles with multi-component grips

Paint marker with bullet tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are particularly lumin

pliers chrome plated, handles with multi-component grips

Electronic side cutters, Super-Knips. Play-free joint, extremely effortless motion, precision-milled. cutting edges without grinding, with opening spring and limiter. Length 125 mm, narrow head, without bevel Cutting force: soft wire from 0.2 to 1.0 mm in

Wiring pliers for gripping, bending and stripping insulation from wires from 0.5 - 0.75/1.5 and 2.5 mm² as well as for crimping wire end ferrules 0.75/1.5/2.5mm².

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Electronic gripping pliers For precision work on electronic parts. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 145 mm, Flat-round, long jaws.

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 160 mm Head chrome-plated, handles VDE-insulated 1000 V. Stripping values: 0.5 to 5 mm diameter

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: black Cap-off time: up to a few days.

head mirror polished, handles with multi-component grips, Oblique End Cutter, short head Style 5: Oblique End Cutter, short head, without bevel, for flush cutting, a = 27°

tool burnished, handles with multi-component grips

With replaceable blades for four or six different conductor cross-sections Conductor is not damaged thanks to precisely ground shaped blade, even fine-stranded wire are gently stripped Clamping jaws hold the wire firmly while stripping With adjustable

Paint marker with metal-framed plastic tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are part

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 0.75 mm • Replaceable tip • Refillable

ESD positioning tweezers hold, insert and pull: With dimensionally adapted shapes, the gripping surfaces are ideal for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore be inserted and move

pliers grey atramentized, head polished, handles with slim multi-component grips

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

For Knipex Crimp System Pliers For non-insulated tubular cable lugs and crimp terminals in accordance with DIN 46237 and non-insulated butt and crimp connectors in accordance with DIN 46341.

Positioning tweezers for holding, inserting, and pulling: With dimensionally adapted shapes, the gripping surfaces are ideally suited for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore b

pliers grey atramentized, head polished, handles with slim multi-component grips

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

Electronics side cutters for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length: 115 mm, round Head shape, without bevel Cutting force: Soft wire from 0.3 to 1.3 mm diam

For burr-free cutting of plastic piping (e.g. plastic reinforced pipes) with a diameter of 6 - 35 mm Not suitable for cable cutting Blades can be replaced and can be retrieved from any position Little force is required thanks to special cutting geometr

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

pliers chrome plated, handles with multi-component grips

Flipchart marker with chisel tip Specifically designed to write on flipchart paper. Ink does not bleed through on to the following pages. • Odourless, water-soluble ink • Refillable • Stroke width: approx. 4.0 - 12.0 mm • Colour: Green Cap-off time: up to

Alligator® Set

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

chrome plated, handles with multi-component grips

pliers burnished, handles with multi-component grips, with 3 interchangeable crimping dies

pliers chrome plated, handles with multi-component grips

Identical to KN 35 22 115 yet with dissipative handle casings for electro- static protection.

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 1 mm • Replaceable tip • Refillable •

pliers chrome plated, handles with multi-component grips, with integrated tether attachment point for a tool tether

non-insulated terminals + cable connectors