Miscellaneous - Edding, Knipex (1,080)

High bending strength of the pliers tips. gripping surfaces cross-hatched, knurled vanadium electric steel- forged, oil-hardened

ESD electronics end-cutting nippers ESD precision nippers for precise cutting tasks such as in electronics and precision engineering. Electrically dissipative handles Box precision joint Low-friction double spring for gentle and smooth opening The mirro

Precision circlip pliers for internal circlips (holes) For fitting circlips in holes in the 8 - 13 mm dia. range High load capacity in continuous operation, up to 10-fold higher service life Precise, effortless screwed joint Forged Large contact surfaces

With electrically conductive coating: Universal ESD tweezers balance and control potential differences between their user and the components. They meet the requirements of the electronics and precision mechanics industry and protect sensitive components.

KNIPEX pliers wrench, nickel-plated Pliers and wrench in one tool, ideal for gripping, holding, pressing and bending workpieces, also for the protective mounting of surface-coated fittings, infinitely variable gripping of all wrench sizes up to 85, parall

Tool roll made of hard-wearing polyester fabric. with practical, adjustable quick release fastener four common Circlip Pliers for internal and external circlips

Interchangeable ESD tips Continuous operating temperature 130° Short-term temperature 190° Design: matt Tip width (B): 0.6 mm Tweezer tip style: pointed Corrosion-resistant: yes Precision mechanics industry: yes Medical industry: yes Science industry: ye

head burnished, plastic housing tool for putting on boards, sockets and fields pushing down and cutting in one operation for UTP and STP cables, conductor 0.4 - 0.8 mm dia. with integrated pulling hook and release blade housing: plastic, impact-proof

Slip-joint gripping pliers 250 mm VDE multi-component grip casings For internal pipe diameters 1/8 - 1'' and wrench sizes 6 - 36 mm Length: 250 mm KNIPEX ''Alligator'' patented. With box joint, self-locking on pipes and nuts, no slipping on the work piece

To twist and cut wire in one operation: fast, reliable and economical. unobtained precision and long service life make these the most widely purchased concreters' nippers in the world cutting edges additionally hardened- cutting edge hardness approx. 61

Especially made for bending wire loops. round, short jaws- finely ground special tool steel, forged, oil-hardened

Adjustment by pushing a button directly on the workpiece: rapid and comfortable handling Fine adjustment: allows optimum adaptation to different workpiece sizes and hand-friendly handle positions. See table for number of adjustment positions. Secure locki

Knipex crimping lever pliers for modular jack For cutting and stripping flat telephone cable and crimping 4, 6 and 8-pin modular plugs, RJ11/RJ12/RJ45. Precise crimping action owing to parallel crimping and lock, energy-saving lever mechanism with length

high loadable, elastic precision points half-round, long jaws knurled gripping surfaces with cutting edges for medium hard wire max. dia. 3.2 mm and hard wire max. dia. 2.2 mm cutting edges additionally induction hardened, cutting edge hardness approx.

Knipex wire end ferrules assortment with pliers. In TANOS MINI-systainer® with wire end ferrule pliers 97 71 180. Fitted with wire end ferrules with plastic collars. Contents: Per 200 pieces 0.5/0.75/1.5/2.5 mm² Per 150 pieces 4.0/6.0 mm² Per 50 pieces 10

Pipe wrench by Knipex - slim, S-type jaw. jaws with offset teeth in opposite direction teeth additionally induction hardened three-point contact on pipes, self-locking I-beam handle design captive adjusting nut red powder coated, jaws bright ground

Chrome / nickel steel: stainless, anti-magnetic (18/10), very common electronic quality. ESD coating: glare-free black, with a surface resistance of approx. 10^5 Ohm tips brushed glare-free Gripping surfaces matted for optimal grip Chrome-nickel steel

Fully open, push, grab! additional fast adjustment on the workpiece by sliding the pliers handle combines the proven, reliable locking of the hinge bolt with an additional push function which makes it easier to work in very confined and inaccessible are

Contains common Precision Circlip Pliers for highest requirements. sturdy plastic packaging also suitable for storage of the pliers 4 parts

Knipex crimping die For KN 97 43. For wire end ferrules 10/16/25 mm².

Pliers wrench 250 mm, up to SW46 mm Pliers and wrench in one tool with parallel-guided gripping jaws, quick adjustment by pushing a button directly on the workpiece. Ideal for gripping, holding, pressing and bending workpieces. Infinitely variable grippin

KNIPEX universal stripping pliers, 0.03 - 10 mm² Self-adapting universal wire strippers The cutting edges of the jaws hold the stripped conductor reliably, so that slippage is prevented. The pair of stripper knives cut the correct cutting depth without ma

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.0 mm • Colour: blue Cap-off time: up to a few days. The cap

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.0 mm • Colour: red Cap-off time: up to a few days. The cap-

For oil-resistant, halogen-free control and sensor / actuator cables with multicore cable design. Shielded and unshielded. Suitable for highly flexible TPE-U-pipes, PUR and PVC cable sheathing, rubber leads such as H05 etc. Adjusts automatically to the di

Electronics side cutters, Super-Knips Produced from INOX stainless steel with precision Milled non-bevelled cutting edges for co-extensive cutting. With wire clamp. Extremely effortless motion, with opening spring. Length: 125 mm Cutting force: 0.2 to 1.

edding 4085 chalk marker - bright colours on boards and glass The edding 4085 chalk marker is undoubtedly the perfect choice for exquisite writing and elegant drawings with chalk. Its fine bullet tip releases liquid chalk with a high degree of opacity, al

Furniture marker for permanently retouching and sealing scratches on veneers and solid wood of different types The round tip has a line width of 1.5 - 2 mm The paint-like ink is water- and smudge-proof, quick drying, odourless and resistant to mild hous

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

Paint marker with metal-framed plastic tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are part

Protects against contact with a stripped live conductor (max. Ø 10 mm) solid plastic

pliers grey atramentized, head polished, handles with slim multi-component grips

With gripping zones for flat and round material, suitable for versatile use. with cutting edges for soft and hard wire long cutting edges for thicker cables cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC special too

Can be opened both sides. Made from tough polyester fabric, with zip fasteners and hook and loop fastener. tool loops inside plastic base tray steel handle with softgrip shoulder strap (can also be used as tool belt) with small pouch for the mobile 20

Roll-up bag with 4 compartments made of durable polyester fabric. With practical, adjustable quick release fastener. Dimensions, opened (L x H): 315 x 275 mm.

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Adjustment by pushing a button directly on the workpiece. Fine adjustment: for optimum adaptation to different workpiece sizes and hand-friendly handle positions. Self-locking on pipes and nuts: no slipping on the work piece, energy-saving work. Gripping

for SMD-technology* angled tips smooth gripping surfaces

ESD cutting tweezers, particularly sharp and hard: ideal for copper, gold, silver and magnetic wire and are also available in ESD variants. Design: matt Tip width (B): 10 mm Tweezer tip style: cutting Corrosion resistant: yes Medical industry: yes Science