Miscellaneous - Edding, Mad-X, MM Spray, Printer Maniak, Sensor (1,917)

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 12.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

ERSADUR soldering tip for i-CON TRACE soldering station

HSS spiral drill bit Hex bit HSSG/ 1/4´´ (0.63 cm) bit drive (DIN 3126)

Dieser Schrumpfschlauch von Delock wird bei einer Vielzahl von Gegenständen eingesetzt, die einen rutschfesten Griff erfordern z. B. bei Werkzeugen, Fitnessgeräten Tennisschlägern oder Angelruten. Bei Hitzeeinwirkung umschließt der Schlauch den Griff voll

With this Delock HDMI switch up to three HDMI devices can be used with one HDMI monitor, TV or beamer. With the button on the device or the remote control you can switch between the HDMI devices. Specification • Connector: Input: 3 x HDMI-A 19 pin female

These Delock cable ties can be used to bundle various cables, lines and hoses to save space. Eyelet for fastening The eyelet allows the cable bundle to be fixed or attached by means of a screw, e.g. to a wall. Excellent durability The cable ties offer g

Magnetic adapter, 4 mm, red

This durable Velcro tape set consists of a roll of adhesive tape and a roll of velcro tape. It can be used for a variety of applications, such as sewing on, attaching objects or for various craft projects. Due to the durable material, the strong Velcro ta

WELLER replacement tip XTA, 1.6 mm, chisel-shaped

PUR electronic cable Li12YD11Y, 6 x 0.50mm² (6 x 28 x 0.15mm), shielded Diameter: 6.35 mm • Halogen-free • Flexible at low temperatures • Notch-resistant • Microbe-resistant Colour: black 10 m coil

ERSADUR soldering tips • Chisel-shaped • 3.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

Power adhesive. Glue sticks Ø 11 mm ULTRA Power, for bonding various materials, particularly powerful universal adhesive. Sets solid after only 15 seconds, and the bonding surface can be loaded after approx. 60 - 90 seconds. Can be removed with hot air wi

DNS® plus wood screw, flat countersunk head, 3.5 x 50 mm, full thread, SIT® 20, steel, galvanised, blue passivated, ETA-11/0106, 200 pcs. Description DNS® plus wood screw - the new standard PRODUCT FEATURES: SIT® Fast drive connection Wobble-free screw

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

OHP marker with corrosion-resistant, metal-framed bullet tip For very clear, vivid writing on an overhead projector, also for labelling glass and plastics. • Permanent, waterproof ink • Stroke width: approx. 0.3 mm • Colour: black

Refill ink with capillary system - ideal for clean and simple refilling of almost all edding whiteboard markers The refill bottle contains 25 ml Simply place the marker in the refill bottle with the tip down for at least one hour, ideally overnight. The

Paint marker with bullet tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are particularly lumin

Ultra-sharp titanium-coated blades deliver outstanding performance, year after year Non stick coating ensures blades stay clean, even when cutting adhesive materials High-quality stainless steel, made in Germany, with exceptional durability User-friendly

The Solder-Ex desoldering strand has been developed for the repair of soldered joints. It consists of a copper braid and is coated with a special halogen-free flux, which accelerates the absorption of solder. The Stannol Solder-Ex desoldering strand is pl

This braided sleeve by Delock can be used to bundle exposed cables, electrical tubes or wires to protect them from dirt or damage. Self-closing The braided sleeve closes automatically after adding the cables. Brilliant resistance The braided sleeve is c

Dust collector for masonry and concrete drills Prevents contamination of the room For plugging onto masonry drills For drill bits with a diameter of 4 - 10 mm

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

Comfortable rotary trimmers for professional use Sturdy metal table with non-slip rubber feet for high stability Handy format lines with mm divisions along the cutting edge of the panel simplify alignment of the workpiece Double guide rod for an absolut

The Solder-Ex desoldering wick has been developed for the repair of solder joints. It consists of a copper wick and is coated with a special halogen-free flux, which accelerates solder absorption. The Stannol Solder-Ex desoldering wick is placed on the so

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Microphone and diode cable, single shielding

The ULTIMATECUT Multidrill revolutionises the working process and sets new standards in processing time, saving up to 75% time. The Multidrill from RUKO achieves this through its revolutionary cutting edge geometry by combining the most diverse applicatio

This type is a line laser for the projection of a laser line. This diode laser module is a very small and effective laser source. The laser module creates a sharp line through special optics and does not require rotating polygon mirrors or motors. The lin

SRBZ Round brush with plaited wire

Industrial paint markers - the highlight for heavy industry Where engines are running and heavy machines are in use, oily, greasy and dirty surfaces cannot always be avoided. Fortunately, the edding 8750 industrial paint marker is well prepared for this -

9412 Textile Box 6001 for 11 Joker switch, empty, 180 x 88 x 46 mm

R2 plus chipboard screw, pan head, 4.0 x 20 mm, full thread, TX 15, steel, galvanised, blue passivated, EN 14592: 2008+A1: 2012, 200 pcs. Description R2 plus chipboard screw - for universal application in interior design, furniture construction, timber c

magnetic adapter • Magnet diameter: 9 mm • Rated current: 12 A • Rated voltage: 33 V AC / 90 V DC • Color: red

magnetic adapter • Magnet diameter: 7 mm • Rated current: 12 A • Rated voltage: 33 V AC / 70 V DC • Color: red

Stannol desoldering wick NC-BB desoldering wick 0.8 mm x 1.5 m halogen-free Highly effective copper desoldering wick No subsequent cleaning required Coated with halogen-free flux-powder Fast desoldering ESD-safe spools (1.5-m spools only) Heat-resistant c

90° HSS taper deburring countersink for M3 countersunk heads. 16.5 mm/M8 DIN 335 C HSS, with cylindrical shank and 3 blades, CBN deep-ground.

DNS® plus wood screw, flat countersunk head, 4.5 x 45 mm, partial thread (L1), SIT® 20, steel, galvanised, blue passivated, ETA-11/0106, 200 pcs. Description DNS® plus wood screw - the new standard PRODUCT FEATURES: SIT® Fast drive connection Wobble-fr

RT Pico high-performance active soldering tip for the smallest microcomponents: 0402 to 01005 RT Pico soldering tips for WXPP/WXPP MS soldering irons Powerful active soldering tip for the smallest microcomponents: 0402 to 01005 Short distance between tip

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

Printing device: Smart Printer (thermal transfer printer) Suitable for WMB Inline WAGO (2009-115, -114, -113), 1x grinding device