Miscellaneous - Edding, Proxxon, Romagna Plastic, Sensor (200)

Flipchart marker with chisel tip Specifically designed to write on flipchart paper. Ink does not bleed through on to the following pages. • Odourless, water-soluble ink • Refillable • Stroke width: approx. 4.0 - 12.0 mm • Colour: black Cap-off time: up to

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.0 mm • Colour: Green Cap-off time: up to a few days. The ca

Industry painter with extremely durable and highly opaque colour paste Ideally suited for labelling rough surfaces, dirty materials and rusty metals. • Fade-resistant, smudge-resistant and waterproof once dry • Also marks on clean surfaces underwater • Ti

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Paint marker with metal-framed plastic tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are part

Elastic silicone polishers in bullet shape. For polishing and smoothing surfaces. For precious metals, non-ferrous metals, stainless steel, glass, porcelain, wood, rubber and plastic. Set of 5

With fabric insert. 50 x 1 x 10 mm. For cutting steel, non-ferrous metal, plastic and wood. Diameter: 50 mm.

OHP marker with corrosion-resistant, metal-framed bullet tip For very clear, vivid writing on an overhead projector, also for labelling glass and plastics. • Permanent, waterproof ink • Stroke width: approx. 0.3 mm • Colour: black

Paint marker with bullet tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are particularly lumin

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: black Cap-off time: up to a few days.

Paint marker with metal-framed plastic tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are part

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 0.75 mm • Replaceable tip • Refillable

High-quality steel brush for high removal rate. 2 pieces, brush shape

Ideal for grinding, deburring, scharpening, rust removal and roughing of steel and non-ferrous metal.

It turns the PD 230/E and PD 250/E lathes into a complete machining center. Incl. column (35x 400mm), mounting flange and fixing screws. Scope of delivery: Drilling and milling device WITHOUT lathe.

Tool holder for cylindrical grinding on lathes Made of steel with 20 mm MICROMOT system fit. For precise clamping of IBS/E or LBS/E drill grinders in the steel holder of the lathe. Stem size 8 x 10 mm. Total length: 65 mm.

Made from HSS steel. DIN 333 (type A). 60°. Complete set of centre drills in sizes 2 mm, 2.5 mm and 3.15 mm.

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

For precision drilling, milling, sanding, polishing, brushing, derusting, engraving, chiselling and cutting. With drill chuck (clamping range 0.3 - 3.2 mm). Precision ball-bearing spindle made of ground steel that can be locked at the push of a button for

Flipchart marker with chisel tip Specifically designed to write on flipchart paper. Ink does not bleed through on to the following pages. • Odourless, water-soluble ink • Refillable • Stroke width: approx. 4.0 - 12.0 mm • Colour: Green Cap-off time: up to

PROXXON super-fine grinding discs made of silicon carbide are ideal for the pre-grinding and finishing of fillers and paint and for removing paint drips and entrapped particles.

Rasp cutter with metal needles made of tungsten-carbide For woodworking: application tools with metal needles made of tungsten-carbide. Unbeatable for modelling, cleaning and smoothing wood and fibreglass. Not for metal! Extremely sharp and easy to operat

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 1 mm • Replaceable tip • Refillable •

Diamond grinding pins ball 1mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter 2.35.

Brass brushes, 5 pieces, in a wheel shape and 1 shaft, suitable for machining brass, copper, semi-precious stones, plastic and wood, as well as for cleaning electronic components and circuit boards.

Flap wheels made of standard corundum The flap wheels are elastic and adapt to the contours of the workpiece to be processed. For machining hard to reach places. Flap wheel diameter 20mm (Shaft diameter 3.0mm)

High-quality steel brush for high removal rate. 5 pieces, wheel shape and 1 shaft.

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: Green Cap-off time: up to a few days.

The fineliner is ideal for writing and preparing drawings, scripts, sketches, fashion illustrations and effective layouts. Water-based ink in attractive colours. Fineliner with metal-framed plastic nib, water-based ink. Stroke width: 0,3 mm

The 11-mm orbital motion of the polishing disc enables hologram-free polishing of painted and bare surfaces without heat building up. Powerful, balanced DC special motor with stepless speed control (full-wave electronics). Smooth-running planetary gear in

Paint marker with metal-framed plastic tip Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are part

Electronically controlled temperature with short heating time. Extra-high battery capacity for long operating life. For convenient, mains-independent soldering. Electronically controlled temperature (470°C) with short heating time. Extra-high battery capa

Wolfram vanadium steel milling bits, for machining soft and hard wood, non-ferrous precious metals, as well as plastics and plaster.

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 0.75 mm • Replaceable tip • Refillable

A soft, light even flow particularly suited for writing and signing. The rubber grip zone is elastic and non-slip and makes writing a comfortable experience. Almost all models are refillable making them particularly eco-friendly. Gel roller with metal-fr

Industrial permanent marker Ideally suited for marking slightly oily and dusty surfaces. • Bullet tip • For industrial use Colour: red Stroke width: approx. 1.5 - 3 mm Filled with smudge-resistant and waterproof ink that is also resistant to etching solut

For clamping asymmetrically shaped wood. Clamping range with reversing jaws from 1.5 - 35 mm inside and from 14 - 67 mm outside. Easy to secure with M16 x 1 internal thread suitable for the main spindle of the DB 250.