Miscellaneous - Einhell, iRobot, Proxxon, Romagna Plastic (132)

Super Cut circular saw blade Saw blade for precision-cut table saw FKS/E 80 teeth for hard wood, soft wood and plastic. Dimensions: 85 x 0.5 x 10 mm

Microchip PIC controller — high-performance RISC CPU Microchip supports the entire performance range from 8-bit, 16-bit and 32-bit microcontrollers with a powerful architecture, flexible storage technologies and extensive easy-to-use development tools, as

Tip turning device For super-precise work with high concentricity. The scope of delivery includes: 1 drive plate, 2 fixed centre points (MK 2 and MK 1/ short) and 1 drive plate (rotating heart). Packed in a wooden case.

PROXXON professional polishing sponges. For applying polishing emulsion to paint and metal surfaces and subsequent polishing.

For milling small openings, regrinding shapes, areas and radii, grinding in grooves, deburring and chamfering of precision parts. Gear head made of die-cast aluminium for high stability and precise ball-bearing fits. Main housing made of glass fibre-reinf

Corundum cutting discs, manufactured with a special binder. 10 discs, diameter 22mm

3-jaw chuck for hand-held Micromot devices Clamping range: 0.5 - 3.2 mm Not for Proxxon Micromot GG12, IB/E, LB/E, Colt2, and MICROMOT 50 and 50/E

Elastic silicone polishers in bullet shape. For polishing and smoothing surfaces. For precious metals, non-ferrous metals, stainless steel, glass, porcelain, wood, rubber and plastic. Set of 5

With fabric insert. 50 x 1 x 10 mm. For cutting steel, non-ferrous metal, plastic and wood. Diameter: 50 mm.

High-quality steel brush for high removal rate. 2 pieces, brush shape

Ideal for grinding, deburring, scharpening, rust removal and roughing of steel and non-ferrous metal.

It turns the PD 230/E and PD 250/E lathes into a complete machining center. Incl. column (35x 400mm), mounting flange and fixing screws. Scope of delivery: Drilling and milling device WITHOUT lathe.

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

Tool holder for cylindrical grinding on lathes Made of steel with 20 mm MICROMOT system fit. For precise clamping of IBS/E or LBS/E drill grinders in the steel holder of the lathe. Stem size 8 x 10 mm. Total length: 65 mm.

8-Pin Flash, 8-Bit Microcontrollers High-Performance RISC CPU: • C Compiler Optimized Architecture • Only 49 Instructions • Operating Speed: - DC – 20 MHz clock input, - DC – 200 ns instruction cycle • Interrupt Capability with Automatic Context Saving •

Made from HSS steel. DIN 333 (type A). 60°. Complete set of centre drills in sizes 2 mm, 2.5 mm and 3.15 mm.

For precision drilling, milling, sanding, polishing, brushing, derusting, engraving, chiselling and cutting. With drill chuck (clamping range 0.3 - 3.2 mm). Precision ball-bearing spindle made of ground steel that can be locked at the push of a button for

Coding pin, for type D, E, F and transition elements I, metal, RAL 7032 (pebble gray)

PROXXON super-fine grinding discs made of silicon carbide are ideal for the pre-grinding and finishing of fillers and paint and for removing paint drips and entrapped particles.

Rasp cutter with metal needles made of tungsten-carbide For woodworking: application tools with metal needles made of tungsten-carbide. Unbeatable for modelling, cleaning and smoothing wood and fibreglass. Not for metal! Extremely sharp and easy to operat

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

Diamond grinding pins ball 1mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter 2.35.

Brass brushes, 5 pieces, in a wheel shape and 1 shaft, suitable for machining brass, copper, semi-precious stones, plastic and wood, as well as for cleaning electronic components and circuit boards.

Flap wheels made of standard corundum The flap wheels are elastic and adapt to the contours of the workpiece to be processed. For machining hard to reach places. Flap wheel diameter 20mm (Shaft diameter 3.0mm)

High-quality steel brush for high removal rate. 5 pieces, wheel shape and 1 shaft.

The 11-mm orbital motion of the polishing disc enables hologram-free polishing of painted and bare surfaces without heat building up. Powerful, balanced DC special motor with stepless speed control (full-wave electronics). Smooth-running planetary gear in

Electronically controlled temperature with short heating time. Extra-high battery capacity for long operating life. For convenient, mains-independent soldering. Electronically controlled temperature (470°C) with short heating time. Extra-high battery capa

Wolfram vanadium steel milling bits, for machining soft and hard wood, non-ferrous precious metals, as well as plastics and plaster.

Replacement heating element for the I-Tool Trace, I-Tool PICO MK2 soldering irons

For clamping asymmetrically shaped wood. Clamping range with reversing jaws from 1.5 - 35 mm inside and from 14 - 67 mm outside. Easy to secure with M16 x 1 internal thread suitable for the main spindle of the DB 250.

Felt polishing wheel (100 x 15 mm) For polishing smooth surfaces on metals (e.g. gold, silver, brass and aluminium) to a high-gloss finish. Retains its shape and has a long service life. Uniform polishing pattern. For use with all polishing pastes.

PROXXON super-fine grinding discs made of silicon carbide are ideal for the pre-grinding and finishing of fillers and paint and for removing paint drips and entrapped particles.

PROXXON diamond-coated cutting and profiling disc for LHW and LHW/A. For cutting, grinding and profiling very hard materials such as glass, porcelain and tiles. Low heat development thanks to a cooling hole.

The precise vertical milling machine for the finest work. Spindle speeds 5000 - 20,000 rpm. For working with extremely small cutters. Stable machine base made of cast iron, vertical guide and cross table. With play-free, readjustable dovetail guide in all

Soft fabric polishing buffers (100 x 15 mm) For polishing gold, silver, platinum, copper, brass, stainless steel and plastic to a high-gloss finish. Adapts to the contours of the workpiece. Use only with polishing paste or emulsion.

Ideal for grinding, deburring, sharpening, rust removal and roughing of stone, glass, ceramics and other very hard materials. 60 Grit.

Brushless direct drive: quiet, vibration-free operation with high precision. Made in Germany. Infinitely variable speed preselection from 400 to 6000 rpm. Digital speed display. Drill head can be swivelled though 360° (indicated on a scale). With 230-V di

For drilling, milling, grinding, polishing, cleaning, cutting, engraving and signing. For precision mechanics, model builders, jewellers, opticians, artists and craftsmen, and electronics engineers. • Ball bearing spindle made of ground steel. With lock b

High-quality steel brush for high removal rate. 2 pieces, cup shape

Diamond grinding pins ball 1.8mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter 2.35