Miscellaneous - Einhell, Mini-Box, MS-Tech, PowerPlus, Romagna Plastic, Sensor (138)

This Delock adapter can be used, for example, to connect an HDMI monitor to your system via a free mini Displayport interface. The adapter supports resolutions up to Ultra HD (4K) and is backwards compatible with Full-HD 1080p. Technical data • Connector

You will need this adapter if your monitor only has the normal HDMI-A connector and you want to connect it to the mini-HDMI connector on the Raspberry Pi Zero. Technical data • Connector: mini-HDMI to HDMI-A • Color: white

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

This Toslink adapter with gold plated contacts converts the end of a standard Toslink cable into a Mini Toslink connector (3.5 mm). Connector 1: mini Toslink/Plug Connector 2: mini Toslink/Jack Wavelength: 650 nm Unshielded Plastic housing Color: black Go

Mini patch panel for RJ45 Cat6 with 12 ports Meets all requirements of the new E-class in line with SO/IEC 11801, EN 50173 Attached using 2 screws. • Class E (250 MHz) in accordance with ISO/IEC 11801 and EN50173 • Fully-shielded RJ45 sockets • Metal hous

Nickel plated steel construction for strength & easy cleaning. Suitable for use with electric drills at speeds between 200 - 700 rpm.

This cable is suitable for connecting a device to a computer. 1x USB 2.0 Cable

The DFG12038B12DN is a 120 mm fan with a high static air pressure of 31.10 mmH2O and an airflow rate of 332.50 cbm/h at 5500 rpm. It is the ideal candidate for use in systems where a lot of heat is generated during operation, such as when a large number o

Pulse Measurements with Power Sensor for FPH handheld spectrum analyzer (unregistred software license).

Adapter plate which is connected on the bottom of a CarryMore unit and links together the unit with a power tool box.

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 4.5 x 60, blue galvanised steel, 1x sliding, VE 200 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

For digitally connecting CD/DAT devices with the optical connection of a digital amplifier. TOSLINK plug to 3.5-mm mini-plug, Cable dia.: 2.2 mm, Length: 3.0 m

USB 2.0 A socket > mini USB plug adapter This Delock USB adapter can be used to convert the mini USB interface of your device into a standard USB-A socket and connect it to an existing USB-A cable on a free USB port of your PC or notebook. This adapter is

This Delock mini Displayport cable can be used, for example, to connect a monitor to your system. Technical data • Connectors: - Mini Displayport 20-pin plug > mini Displayport 20-pin plug • Displayport 1.2 specification • Wire gauge: 32 AWG • Cable: twi

Advanced Analysis option for Rohde & Schwarz Power Analyzer HMC8015 (unregistered software license).

Pre-assembled WINSTA® MINI connecting cable with degree of protection IP20 For signal and power transmission: The assembled WINSTA® MINI connecting cable with incorrect mating protection. WAGO installation connectors are used when requirements for an elec

D-Link DEM-431XT kompatibler BlueOptics SFP+ D-Link DEM-431XT compatible 10GBASE-SR SFP+ transceiver with LC duplex connection according to MSA standards from the BlueOptics brand. The D-Link DEM-431XT compatible 10GBASE-SR LC Duplex SFP+ has a receiving

Netgear AXM761 compatible BlueOptics SFP Netgear AXM761 compatible 10GBASE-SR SFP+ transceiver with LC duplex connection according to MSA standards from the BlueOptics brand. The Netgear AXM761 compatible 10GBASE-SR LC Duplex SFP+ has a receiving function