Miscellaneous - Einhell, MM Spray, Printer Maniak, Romagna Plastic, Sensor (775)

Tool compatibility: For use with the WXMPS MS smart soldering irons and the Wxsmart soldering station Perfect for all micro and standard applications for micro and standard component sizes: Smart, active, high-performance soldering tips for micro and stan

ERSADUR soldering tip for i-CON TRACE soldering station

HSS spiral drill bit Hex bit HSSG/ 1/4´´ (0.63 cm) bit drive (DIN 3126)

Power adhesive. Glue sticks Ø 11 mm ULTRA Power, for bonding various materials, particularly powerful universal adhesive. Sets solid after only 15 seconds, and the bonding surface can be loaded after approx. 60 - 90 seconds. Can be removed with hot air wi

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

Strong magnetic ring to secure screws. Screwdriver bit can be recessed into the holder to create a contact surface for the screw head. Ideal for hard-to-reach places. For manual operation, electric screwdriver and drills. Drive: Hexagon, solid 6.3 (1/

14-mm carbon trimmer potentiometer with plastic housing and degree of protection IP 5 (dust-proof). Feature: • Self-extinguishing plastic parts in accordance with UL 94 V-0. Applications: • Electronic devices: white goods, brown goods, small household app

Universal drill bit, 4.0 mm Areas of application: Masonry, tiling, (some) glass, marble, plastics, metal, non-ferrous metals, coated chipboard, lightweight materials. These drill bits are not intended for rotary percussion drilling, but may be used for li

Assortment box, assortment case made of transparent, unbreakable polypropylene with clear cover and stable slide locks. • With 32 compartment partitions • Dimensions (W x D x H): 338 x 260 x 57 mm

Earth bonding point (EBP) 1 MOhm safety resistor per connection. 2 m earth conductor with 4 mm lug Tabletop and under-table mounting. 3 x 10 mm push-button

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: blue

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 9 lengths Strip width: 3 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

Connecting cable, red/black, angled/straight 4 mm connection, for HIOKI multimeters from product series DT425x/DT428x or similar, CAT III 1000 V, CAT IV 600 V, 120 cm length

Magnetic adapter, 4 mm, red

WELLER replacement tip XTA, 1.6 mm, chisel-shaped

ERSADUR soldering tips • Chisel-shaped • 3.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

The Solder-Ex desoldering strand has been developed for the repair of soldered joints. It consists of a copper braid and is coated with a special halogen-free flux, which accelerates the absorption of solder. The Stannol Solder-Ex desoldering strand is pl

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

The ULTIMATECUT Multidrill revolutionises the working process and sets new standards in processing time, saving up to 75% time. The Multidrill from RUKO achieves this through its revolutionary cutting edge geometry by combining the most diverse applicatio

This type is a line laser for the projection of a laser line. This diode laser module is a very small and effective laser source. The laser module creates a sharp line through special optics and does not require rotating polygon mirrors or motors. The lin

SRBZ Round brush with plaited wire

9412 Textile Box 6001 for 11 Joker switch, empty, 180 x 88 x 46 mm

magnetic adapter • Magnet diameter: 9 mm • Rated current: 12 A • Rated voltage: 33 V AC / 90 V DC • Color: red

magnetic adapter • Magnet diameter: 7 mm • Rated current: 12 A • Rated voltage: 33 V AC / 70 V DC • Color: red

90° HSS taper deburring countersink for M3 countersunk heads. 16.5 mm/M8 DIN 335 C HSS, with cylindrical shank and 3 blades, CBN deep-ground.

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

ERSADUR soldering tip for i-CON TRACE soldering station

Ring gear drill chuck, 10 mm clamping Industrial design. With 10 mm spigot for use in the 10 mm collet. Incl. chuck wrench.

Diamond cutting disc for stone with average diamond concentration by RHODIUS. High performance with short cutting times, good service life, high safety, normal cooling time and average diamond concentration. Dry and wet cut possible. Diameter: 230 mm Widt

New premium line of lockable PeakTech universal carrying cases safely stores your sensitive electronic equipment when travelling or during field work. To adapt this sturdy case universally to the respective equipment, each case is padded with a 1 cm-thick

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 5 lengths Strip width: 6 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

Solid wood decking screw, H361 flat countersunk head, TX, milled ridges underneath head, collar, double thread Thread-Ø: 3,5 Length: 50 mm Contets: 200 pieces zinc plated yellow

Enamelled copper wire Loosely wrapped Diameter: 0.7 mm Length: 12 m

10.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

CV wood drill bit, 12 mm Area of use: Softwood, hardwood, plywood, chipboard. Working length: 30 mm - 105 mm

Isolated line laser, red, 20°, 650 nm, 3 VDC, 12x32 mm, class 1. This type is a line laser for the projection of a laser line. The laser has a very compact design. The power consumption is very low, therefore 2 batteries can easily be used for power suppl

WELLER replacement tip XTD, 4.6 mm, chisel-shaped

Waste toner container for Canon iPF TC-20