Miscellaneous - Einhell, PowerPlus, Romagna Plastic, V-Tac (94)

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

LED bulbs for caravans and boats, operated at 12 - 60 V DC/AC. IP65 protected

Convient comme lampe d'affichage et de signalisation pour le modélisme, par exemple les locomotives, les maisons, les lampadaires, l'éclairage des crèches, ainsi que pour les lumières de Noël et les guirlandes lumineuses

LED work light, square, 9 x 3 W, approx. 1890 lumens, Aluminium and glass polycarbonate housing, Technical details: Lamp: 9 x high-performance LED Epistar Power: 27 watts (9 x 3 watts) Voltage: 10 - 15 V Light intensity: approx. 1890 lumens Protection cla

Premium chisels with self-sharpening effect offer the longest service lifes for the maximum efficiency in terms of results - durable and powerful.

LED G53 AR111 x 67 12 V 690 lm 12 W 927 35° AC/DC Grey Dim

Stable SMD technology which makes the product more reliable and durable Uses 80% less energy and lasts 20 times longer than Standard Bulbs

LED work light, 120 W, (40x3 W), approx. 12,000 lumens, aluminium and glass polycarbonate housing Technical details: Lamp: 40 x high power LEDs at 3 W Voltage: 10 - 30 VDC Light intensity: approx. 12,000 lumens, light colour 6000k Dimensions (WxHxD): appr

WERMA red LED flash light, 24 V DC Optical signal element • Clear signalling even in low light conditions • Service life: 50,000 h • Flash frequency approx. 1 Hz (double flash) For the WERMA modular system, you need the following elements: • Signal elemen

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

RAFI indicators • With integral bulb • 10 mm • Round bezel • 24 - 28 V

Premium chisels with self-sharpening effect offer the longest service lifes for the maximum efficiency in terms of results - durable and powerful.

Hammer drill bit set, with SDS-Plus attachment. Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. 1 each of 5/6/8 mm (50x110 mm) 1 each of 6/8/10/12 mm (100x160 mm)

• Small lamp • C-2R indicator and signal lamp

The epoxy resin system Casting Resin Plus 90 is a sealing compound that is as clear as glass once hardened.

OSRAM HALOSTAR® ECO STAR Product benefits • Brilliant ECO accent lighting • Significantly lower CO2 emissions • High light yield compared to standard lamps • Brilliant small dimensions for revolutionary new lighting designs • For operation in open light

DC/DC LED driver from the LDD-L series. • Step-down DC/DC converter • Constant current output • Wide input voltage range • Efficiency: up to 95% • Built-in EMI filter (in accordance with EN55015 and FCC Part 15) • Integrated PWM and remote ON/OFF controll

ERSA Multi-TC Power soldering iron with sensor-controlled tip temperature The ERSA Multi-TC is a powerful, robust, temperature-controlled Power soldering iron with sensitive temperature sensor positioned directly under the internally heated soldering tip.

Get to know the versatile Aqiila electric air pump, your ideal companion for any situation! This all-in-one portable air compressor, power bank and torch delivers impressive 10.3-bar pressure (150 psi) and air flow of 20 - 22 L/M. With a built-in 4000-mAh

Convient comme lampe d'affichage et de signalisation pour le modélisme, par exemple les locomotives, les maisons, les lampadaires, l'éclairage des crèches, ainsi que pour les lumières de Noël et les guirlandes lumineuses

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

LED lamp with decorative spiral filament.

Flat LED, round special form, 3 mm, green. Manufacturer no.: L-424GDT

Solvent-free two-component adhesive on epoxy resin basis for particularly fast adhesion on small surfaces. The processing time is up to 2 minutes, and hand-tightness is achieved after 5 minutes. The final strength is approx. 800 N/cm². The bonded joint ha

The underbody protection gun is specially designed for the application of underbody protection, sound-absorbing or sealing material

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Solvent-free two-component adhesive on epoxy resin basis for highest loads. The processing time is up to 90 minutes. Curing time and final strength are temperature-dependent. At room temperature, solid after 12 hours. The bonded joint is impact-resistant,

LED working floodlight, 120 W, (40x3 W), approx. 7800 lumens, Housing aluminium, glass polycarbonate, Technical details: illuminant: 40 x high power LED at 3 W Voltage: 10 - 30 VDC Light intensity: approx. 7800 lumens Light colour: 6000 K Protection class

• C-2R filament • Miniature lamp / micro incandescent lamp for versatile use, e.g. switches, buttons, etc.

Power Sensor Support for FPH handheld spectrum analyzer (unregistred software license).

RAFI indicators • With integral bulb • 10 mm • Arrow-shaped bezel • 24 - 28 V

RAFI indicators • With integral neon bulb • 10 mm • Arrow-shaped bezel • 230 V

• Small lamp • C-2R indicator and signal lamp

LED tube from the V-TAC Professional Line - to meet the very highest demands. Rotating version They feature a plastic housing, making them less breakable than glass tubes. A starter is included with the tubes. This replaces the existing starter. Install t

Mounting shank For 68/68S/68W/80/80S/80W drill bits M16 external thread with holes for centre drill. Driven by SDS Plus shank Drill Ø 9 mm (Does not include drill bit)

Filament bulb, 24 V / 5 W Bulb • 24 V / 5 W • 42 mm For the following part numbers: WERMA 200 xxx xx WERMA 203 xxx xx WERMA 641 xxx xx WERMA 815 xxx xx

LED tube from the V-TAC Professional Line - to meet the very highest demands. Highly efficient at 160 lm/W They feature a plastic enclosure, making them less breakable than glass tubes. A starter is included with the tubes. This replaces the existing star

LED work light, 420 W, (140 x 3 W), approx. 42,000 lumens, aluminium and glass polycarbonate enclosure Technical details: Lamp: 140 x high power LEDs at 3 W Voltage: 10 - 30 VDC Light intensity: approx. 42,000 lumens, light colour 6000k Dimensions (WxHxD)

LED work light, 5 x 3 W, approx. 900 lumens, aluminium and glass polycarbonate housing, Technical details: Lamp: 5 x high power LED, power: 15 W (5 x 3 W) Voltage: 9 - 32 V, light intensity: approx. 900 lumens Protection class: IP67 Dimensions (W x H x D)

Sub-miniature bulb T1 Voltage: 18 V Current: 26 mA Output: 0.47 W Pin socket spacing: 2.54 mm Dimensions (ØxL): 3.17 x 9.5 mm Type: indicator lamp