Miscellaneous - Epson, PowerPlus (99)

Hammer drill bit set, with SDS-Plus attachment. Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. 1 each of 5/6/8 mm (50x110 mm) 1 each of 6/8/10/12 mm (100x160 mm)

Buy this printer between September 15, 2024 and January 31, 2025 and request €30/CHF30 cashback from the manufacturer. The terms and conditions can be found in the data sheets. DIN A4 multifunction WLAN ink tank printer, with an included supply of ink for

The epoxy resin system Casting Resin Plus 90 is a sealing compound that is as clear as glass once hardened.

Get the practical L-BOXX now - filled with 1800 PowerFast II screws with full and partial thread in the common dimensions and a ProfiBit set. The Fischer PowerFast II is a galvanised, zinc-plated, blue-passivated screw with full or partial thread and inne

ERSA Multi-TC Power soldering iron with sensor-controlled tip temperature The ERSA Multi-TC is a powerful, robust, temperature-controlled Power soldering iron with sensitive temperature sensor positioned directly under the internally heated soldering tip.

Get to know the versatile Aqiila electric air pump, your ideal companion for any situation! This all-in-one portable air compressor, power bank and torch delivers impressive 10.3-bar pressure (150 psi) and air flow of 20 - 22 L/M. With a built-in 4000-mAh

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

Der Spezialist im Vollbaustoff. Vorteile Die 4-fach-Spreizung sorgt für optimale Krafteinleitung in den Baustoff und garantiert hohe Haltewerte in Voll- und Lochbaustoffen. Die speziellen Fixierflügel sorgen für eine Vorfixierung der Schraube, wodurch bei

Q200 Plus chipboard screw TX, partial thread Thread: 6,0 Thread: 120 mm Steel zinced, Plastic-Box

Serving 2 users at once (with intelligent power sharing) High performance and functionality - Compatible with Weller’s microsoldering cartridge tip tools, plus many existing passive tip tools Intuitive use thanks to clear menu structure Reduced footprint

Solvent-free two-component adhesive on epoxy resin basis for particularly fast adhesion on small surfaces. The processing time is up to 2 minutes, and hand-tightness is achieved after 5 minutes. The final strength is approx. 800 N/cm². The bonded joint ha

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Solvent-free two-component adhesive on epoxy resin basis for highest loads. The processing time is up to 90 minutes. Curing time and final strength are temperature-dependent. At room temperature, solid after 12 hours. The bonded joint is impact-resistant,

Compatible main devices The following models are compatible with one or more items from this range. For more information, refer to the appliance manual. SureColor SC-P900 SureColor SC-P700

PCE Instruments PCE-PA 5500 power meter AC voltage: 30 to 264 V AC current direct: 0.025 mA to 5 A Energy counter RS485 Modbus interface Accuracy class: 0.5 Product benefits: The power meter is a compact instrument for measuring and displaying various

Power Sensor Support for FPH handheld spectrum analyzer (unregistred software license).

Mounting shank For 68/68S/68W/80/80S/80W drill bits M16 external thread with holes for centre drill. Driven by SDS Plus shank Drill Ø 9 mm (Does not include drill bit)

Take advantage of this high-quality, cost-effective A3+ printer with two paper trays, double-sided printing and wireless connectivity - perfect for small businesses. DIN A3+ printer 2 paper trays at the front, 1 paper tray at the rear 25 pages per minut

Flexibility, visibility and quick access to tools, accessories and other parts with the Superclip system. It consists of a tool wall panel (steel perforated plate) and different versions of tool hooks. The clips can be mounted anywhere on the wall and mov

Highly practical silicone work mat for soldering work or repairing electronic components. Dimensions: 45 x 30 cm Anti-static Heat resistant up to 500°C Wipeable Suitable for soldering electronic components For repairing printed circuit boards etc. 14 stor

The METRAclip 87 clamp multimeter is suitable for the measurement of medium power values in the low-voltage range, and thus offers optimized safety for all types of systems and under any measuring conditions. In addition to applications in the areas of ma

OT-WL06 Wi-Fi dongle, 2.4 GHz/5 GHz, suitable for: TM-T20III, TM-m30II

Q200 Plus chipboard screw TX, partial thread Thread: 5,0 Thread: 80 mm Steel zinced, Plastic-Box

This feed scanner will revolutionise your workflow with innovative functions for capturing a wide range of documents. Sensitive document mode Double feed detection With a powerful media management system and innovative, intelligent features that ensure a

the fischer Power-Fast FPF-ST P chipboard screw is a chipboard screw with a countersunk head, torx TX drive and partial thread. The countersunk head with a torx TX drive guarantees maximum power transmission with maximum bit stability for flush-mounted sc

The METRAclip 86 clamp multimeter meets all of the expectations of operations in the electrical trades and is suitable for applications in the low-voltage range with low to medium power values, e.g. maintenance of electrical installations and machinery, t

Loop-powered unipolar-reading process monitor with 4 - 20 mA input and red LED display. Product series: DMR20-4/20 Measuring range: 4 mA to 20 mA Display type: LED Colour: Red Number of digits: 3,5 Digit height: 7,6 mm Power supply type: Loop-powere

Water analysis made easy! With the McPower swimming pool water tester you can analyse the exact chlorine and pH values in seconds. You can then effectively influence water quality without the inaccuracy of traditional test strips. Ph value measurement Ch

MCPower universal nut, for 1/4'' to 3/4'', incl. adapter This ingenious tool replaces almost your complete tool case and adapts to almost any type of screw. Easily loosen and screw wall hooks, plug-in nuts, square-head and hexagon screws, special pins, br

Q200 Plus chipboard screw TX, partial thread Thread: 6,0 Thread: 100 mm Steel zinced, Plastic-Box

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

Nickel plated steel construction for strength & easy cleaning. Suitable for use with electric drills at speeds between 200 - 700 rpm.

Loop-powered bipolar-reading process monitor with 4 - 20 mA input and red LED display. Product series: DMR20-4/20 Measuring range: 4 mA to 20 mA Display type: LED Colour: Red Number of digits: 3,5 Digit height: 7,6 mm Power supply type: Loop-powered

Pulse Measurements with Power Sensor for FPH handheld spectrum analyzer (unregistred software license).

The WF-4830DTWF offers all the benefits of the WF-4820DWF, but boasts an additional 250-sheet paper tray, 50-sheet automatic document feeder and duplex scan.

Adapter plate which is connected on the bottom of a CarryMore unit and links together the unit with a power tool box.

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 4.5 x 60, blue galvanised steel, 1x sliding, VE 200 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

High-performance, robust, temperature-controlled soldering iron. The proven ERSA RESISTRONIC temperature control provides fast warm-up and temperature rises in conjunction with the ceramic PTC heating element. Using the ERSA PTC70, you can carry out both