Miscellaneous - Ford Tools, Gedore (293)

Acc. to DIN 838, ISO 3318, ISO 1085, ISO 10104 5° offset Thin walled rings Chrome-vanadium steel Matt satin chrome-plated finish In holder

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Battery for Milwaukee power tools. Compatible replacement battery, not an original battery from the manufacturer! Refer to the device and battery numbers listed to select the right battery for your device! Replacement battery suitable for: MILWAUKEE: 0511

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Hex recess drive for bits 1/4'' With powerful magnetic holder Bit holder with powerful magnet Elongated hole in the handle for hanging up Chrome-vanadium steel

Pneumatic cartridge gun, 310 ml Description For processing cartridges and softpacks Ideal for silicone or acrylic-based adhesive cartridges For gluing in windscreens and most rear and side windows Can also be used for body sealant, seam adhesive etc.

With ash handle 65 Shore D 65 Shore D

Acc. to DIN 3122, ISO 3315 Small, drop shaped head for confined areas Fine-toothed (60 teeth), with lever change and push-button release Return angle 6 degrees Non-slip 2-component handle with hanging hole For hand-operated sockets and accessories with sq

Suitable for nuts up to property class 6 With chisel stopper With chisel stopper

Battery for Black&Decker power tools. Compatible replacement battery, not an original battery from the manufacturer! Refer to the device and battery numbers listed to select the right battery for your device! Replacement battery suitable for: BLACK & DECK

Surface chrome-plated with black tip With 2-component handle Hard component from PP, non-slip soft component from TPV Contents: slotted screwdriver 3 5.5 6.5 mm cross-head screwdriver PH 0 1 2 Elongated holes in the handle for hanging up

Acc. to DIN 3123, ISO 3316 For hand-operated sockets and accessories with square drive as per DIN 3120, ISO 1174, ball locking device Vanadium steel 31CrV3, chrome-plated

With internal hexagon drive as per DIN ISO 1173 With square drive as per DIN 3120 - C 6,3 (1/4'') or C 10 (3/8'')

In transparent plastic box In transparent plastic box

Set of 32 HSS thread tapping tools Description Universal set Straight grooved hand taps With adjustable wrench and cutting die holder Includes thread gauge and screwdriver High-performance steel Features Material 1: high-performance steel Cutting mat

Carefully hardened and tempered along the full length Striking heads inductively tempered With black protective hand guard for safe comfortable working

For controlled tightening of wheel nuts on light-alloy rims Plastic sleeves for damage-free work on aluminium wheel rims Colour coding for ease in identifying the right size Machine-operated, fixing with safety ring / pin Phosphated surface Square drive a

Product description Specially developed professional multimeter for automotive and commercial vehicle electrics and electronics applications Dual LCD display with digital display and bar graph display (32 segment bar graph) With automatic overflow and pol

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Clamping reach 125 mm, chuck for pipes with 13.5 - 56 mm Ø Precise guidance With anvil Max. clamping force 25 KN With anvil Max. clamping force 25 KN Cast-iron

Drain valve holder and screw-in wrench for eccentric and standard valves 1.1/4” Usable from top or bottom Usable from top or bottom

3-component handles Power-Grip3 with striking cap Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Hexagon blade with additional hexagon bolster Blade from GEDORE mol

In transparent plastic box In transparent plastic box

Made from hardened and tempered steel to EN 10083 Enamelled blue, with ground faces Painted blue, worktops sanded

Sockets bi-hex 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 30 32 mm Lever change ratchet, fine-toothed, 72 teeth Extension 125 250 mm T-handle = Adaptor + Extension Adaptor 3/8'' x 1/2'' Dimensions: L 383 x W 272 x D 80 mm Chrome-vanadium steel,

slotted 5.5 7 8 PH 1 2 PZ 1 2 Socket 3/8'', bi-hex, metric, short, as per DIN 3124, ISO 2725 Spark plug socket 16 21 mm Spark plug socket 3/8'' with pressed-in holding rubber and extra drive hex Size 19 Spark plug socket 3/8'' with pressed-in holding rubb

Flat pattern UD profile Working angle: 7° from 8 to 15 mm, 6° from 16 to 27 mm and 5° from 30 to 36 mm For ratchet loosening and fast tightening High torque transfer Hollow profile comfortable to hold Warp-resistant geometry with double T-girder effect GE

Square drive as per DIN 3120 - C 12,5, ISO 1174, with ball retention groove Screwdriver bit socket 1/2'', TX, with pressed-in, phosphated pin, non-slip knurled head, brightly polished on the drive side Chrome-vanadium steel, matt satin chrome-plated For h

Working ends polished With wooden handle Flanged blade Flanged blade

Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle Cutting wheel with high service life No. 2180 3 and 2180 4 body in pressure-cast magnesium, no. 2180 5 body in pressure-cast aluminium No. 2180 5 with qu

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Socket hexagon 6 7 8 10 11 12 13 mm 1/4'' Bits: hexagon 4 5 6 mm slotted 5.5 mm cross-head PH 1 2 cross-head Pozi PZ 1 2 TX T15 T20 T25 T27 T30 Reversible bit ratchet 1/4'' MINI Adaptor 1/4'' x 1/4'' Bit fixation adaptor 1/4'' Chrome-vanadium steel, matt

Sturdy design Oval head Dual-material handle, for easy handling For sockets, accessories etc. with square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retention groove 2-component-handle for a hands-friendly transfer of force Matt chrome-plated surf

Strong drop forged design Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required By reversing the legs, this tool can be used as an internal or ext

Vacuum pressure pump set, 21 pieces The BRILLIANT TOOLS vacuum pressure pump set BT581500 is ideal for testing pressure and vacuum systems. The adapters included can be used to test parts such as vacuum pumps, control valves for/and vacuum cans, turbocha

Product description With wall bracket For compressed air and water Drum can be freely swivelled 180° by being wall mounted Elastic, kink-resistant hybrid polymer tubing Automatic retrieval With feed guide Multiple locking per revolution Locking device Inc

Product description With external hexagon drive according to DIN 3126/ISO 1173 - C 6.3 For manual operation and electric screwdriver Includes magnetic quick-change bit holder and 1/4'' socket adapter With practical belt holder Ideally suited for screw con

Working edges carefully hardened and tempered Working ends evenly hardened and carefully tempered

With box joint Lengthways-serrated grip surfaces With box joint 7 settings With box joint Chrome-vanadium steel Red powder-coated

Product description Extremely compact Powerful with 1240 Nm Robust High-performance industrial jumbo striking mechanism Ergonomically shaped handle The extremely compact, robust and powerful BRILLIANT TOOLS BT160400 1/2'' mini pneumatic impact wrench assi