Miscellaneous - Gedore, iRobot (267)

PIC16F54 Description This powerful (200 nanosecond instruction execution) yet easy-to-program (only 33 single-word instructions) FLASH-based 8-bit microcontroller packs Microchip’s powerful PICmicro® architecture into an 18-pin package. Easily adapted fo

Cutting edge polished With three nail pullers With 3 nail pullers

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Heavy duty pattern Chrome-vanadium

For internal and external measurements, with polished tips, depth gauge and high-speed setting Graduated in mm and inches, vernier 1/20 and 1/128'' In leather wallet In leather wallet

PIC16F690 Description: The Low Pin-count (20) PIC® Flash microcontroller products offer all of the advantages of the well recognized mid-range x14 architecture with standardized features including a wide operating voltage of 2.0-5.5 volts, on-board EEPROM

For removing solder residues when de-soldering electronic components The white soldering tip consists of Teflon material The housing consists of aluminium (black) and PA6 polymer (blue)

Pliers and wrench in one tool Maximum capacity: 50mm or 1.7/8'' 17 setting positions Chrome-plated surface with rough dipped handles Length 250mm, weight 535g Only available in version TC DIN ISO 5743

Forged hammer head DIN 1041 With contoured ash (No. E 600 E) or hickory (No. E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and

Straight Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Chrome-vanadium steel

Blade from bit steel, matt chrome-plated Contents: Hexagon screwdriver 2.5 3 4 5 6 8 mm Matt chrome

Made from chrome-vanadium steel Striking end tempered Shaft copper, tip paint-coated in silver Vanadium Steel

Hammer head forget, black varnished, striking faces polished Striking surface inductively case-hardened for tough long-term work Acc. to DIN 6474 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking face Doub

Acc. to DIN ISO 2936 GEDORE vanadium steel 61CrSiV5, zinc-plated Acc. to DIN ISO 2936 Chrome vanadium steel 61CrSiV5, galvanised

Chrome-vanadium steel, ISO-nickel-plated Chrome-vanadium steel, ISO-nickel coated

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Rubber straps and pockets for inserting tools For orderliness and more storage space Mounting material is included in delivery Mounting material for L-BOXX® 136 is included

Hammer head forget, black varnished, striking faces polished Striking surface inductively case-hardened for tough long-term work Acc. to DIN 6474 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking face Doub

Carefully hardened and tempered along the full length Striking heads inductively tempered Working edge polished and clear varnished 116 L = long pattern

Matt chrome-plated For hand-operated sockets Square drive as per DIN 3120 - C 12,5, ISO 1174, with ball retention groove Coupler based on DIN 3120 - A 12,5, ISO 1174, with ball lock Chrome-vanadium steel

PIC12F675 8-Pin Flash-Based 8-Bit CMOS Microcontroller High-Performance RISC CPU: • Only 35 Instructions to Learn - All single-cycle instructions except branches • Operating Speed: - DC – 20 MHz oscillator/clock input - DC – 200 ns instruction cycle • Int

Key features Enhanced mid-range core with 49 commands, 16 stack layers Flash program memory with self-read/write function Extreme Low Power (XLP) IDLE and DOZE power saving modes Peripheral Module Shutdown (PMD) Peripheral Pin Selection (PPS) 4x 10-

With clamping wrench With clamping wrench

One tool that works like a spanner and pliers DIN ISO 5743 Can replace two complete open-ended spanner sets, metric and inch, gripping size 0 - 52mm/0 - 2'' Careful assembly of bolt connections with delicate surfaces (e.g. chrome-plated fittings) Adjustab

For fast and stable connection of two aluminium profiles. Self-forming thread without chip formation.

14/20-Pin 8-Bit Advanced Analog Flash Microcontrollers High-Performance RISC CPU • C Compiler Optimized Architecture • Only 49 Instructions • Up to 14 Kbytes Linear Program Memory Addressing • Operating Speed: - DC – 32 MHz - DC – 125 ns instruction cycl

Consisting of universal pliers 142 10 TL, power combination pliers 8250-200 JC and power side cutter 8314-180 JC, Swedish pattern Best cutting power (Bcp) reveals the optimum cutting point under perfect power utilisation 8314-180 JC Power side cutter: Hig

With indented grip Dimensions: 450 x 210 x 30 mm Dimensions: 450 x 210 x 30 mm

Acc. to DIN 838, ISO 3318, ISO 1085, ISO 10104 5° offset Thin walled rings Chrome-vanadium steel Matt satin chrome-plated finish In holder

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Hex recess drive for bits 1/4'' With powerful magnetic holder Bit holder with powerful magnet Elongated hole in the handle for hanging up Chrome-vanadium steel

With ash handle 65 Shore D 65 Shore D

Acc. to DIN 3122, ISO 3315 Small, drop shaped head for confined areas Fine-toothed (60 teeth), with lever change and push-button release Return angle 6 degrees Non-slip 2-component handle with hanging hole For hand-operated sockets and accessories with sq

Insulated BNC adapter plug for 4-mm safety plugs. 500 V/cat. I

Suitable for nuts up to property class 6 With chisel stopper With chisel stopper

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

Surface chrome-plated with black tip With 2-component handle Hard component from PP, non-slip soft component from TPV Contents: slotted screwdriver 3 5.5 6.5 mm cross-head screwdriver PH 0 1 2 Elongated holes in the handle for hanging up

Acc. to DIN 3123, ISO 3316 For hand-operated sockets and accessories with square drive as per DIN 3120, ISO 1174, ball locking device Vanadium steel 31CrV3, chrome-plated