Miscellaneous - Gedore, M-Tech, PowerPlus (329)

Combination pliers 180 mm Side cutter 160 mm Telephone pliers 200 mm

With technical and economical benefits due to the variable clamping reach and automatic grip of the legs Especially suited to removing V-belt pulley wheels and flywheels mounted on longer shafts Upgradeable with hydraulic spindle (see table) Upgradeable w

Use: Controlled screw tightening from 40 to 200 Nm Repetition-accurate and precision-like Audible Torque triggering can clearly be heard and felt Clockwise and anti-clockwise tightening from switching over the mushroom head/push-through square Features: A

This 18-watt LED glass tube measures 120 cm. As with conventional versions, the LED-powered tube also has a standard G13 base, making it a quick like-for-like replacement. The warm white light emitted by the LED tube is distributed evenly over the opal gl

The epoxy resin system Casting Resin Plus 90 is a sealing compound that is as clear as glass once hardened.

12 V multicolor LED light strip (RGB + white) from OPTONICA LED on flexible strip for decorative lighting. The LED strip has bright and long-life RGB (red, green, blue) and white LEDs. This allows you to create not only standard colors (red, green, constr

Suitable for power drills Self-priming Suitable for all fluids (chemical-resistant rotor) Delivery height: max. 12 m Drive shaft diameter 6 mm Flow rate max. 450 l/h at 3000 rpm Suction height: max. 1.5 m Plug-in grommet for 1/2'' hose attachment

Strong drop forged design Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required By reversing the legs, this tool can be used as an internal or ext

Reduced expense due to versatile use as an engineer’s and recoilless hammer Universal use for service and assembly work With all advantages of a recoilless hammer with higher impact Less energy necessary, easier working With exchangeable splinter-proof, s

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

KP-2012SURCK, Hyper Red (AlGaInP), Water Clear, 120...230mcd, 2.0 x 1.25 mm SMD Chip LED Descriptions: • The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode • Electrostatic discharge and power surge could damage

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

Sockets hex 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 mm Spark plug socket 16 21 mm Lever change ratchet, fine-toothed, 72 teeth Extension 75 150 mm T-handle Universal joint Adaptor 3/8'' - 1/4'' Dimensions: L 300 x W 180 x D 52 mm Universal joint

Ring offset to 15°, reversible for right and left hand operation Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Matt satin chrome-plated finish Chrome-vanadium steel

Large format digital voltage-input process meter with red LED display. Product series: DMS01-VP Measuring range: 0 VDC to 10 VDC Display type: LED Colour: Red Number of digits: 4,5 Digit height: 25 mm Power supply type: DC powered Operating tempera

Unique rotation direction tester for three-phase power supply systems and motors The unique tester Fluke 9062 provides a rotating field and motor rotation indicator display combined with the advantages of non-contact measurement. Fluke 9062 is designed fo

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Oval head Dual-material handle, for easy handling For sockets, accessories etc. with square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retention groove 2-component-handle for easy transfer of force 2-component-handle for a hands-friendly transfer

Saw blade 404 A-406 A Saw blade No. 404 A-406 A Bimetal saw blade No. 407 A

Q200 Plus chipboard screw TX, partial thread Thread: 5,0 Thread: 70 mm Steel zinced, Plastic-Box

The JARO 20060 M LED spotlight from Brennenstuhl is an extremely energy-efficient LED floodlight with 150 W power that meets the highest demands. It also impresses with its extremely flat design and robustness. The built-in Everlight SMD LEDs ensure an ex

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Universally applicable for inflating car, motorcycle and bicycle tyres, sports balls and air toys. With LED working light and integrated storage compartment for air hose and accessories Features and technical details: Incl. adapters and fuses Power consu

The JARO 14060 M LED spotlight from Brennenstuhl is an extremely energy-efficient LED floodlight with 100 W power that meets the highest demands. It also impresses with its extremely flat design and robustness. The built-in Everlight SMD LEDs ensure an ex

For controlled tightening of wheel nuts on light-alloy rims Different colours for quick access to the required size Length: 85 mm Contents: Impact sockets 17 19 21 mm Machine-operated, fixing with safety ring / pin Surface phosphated Chrome-molybdenum ste

Carefully hardened and tempered along the full length Striking heads inductively tempered Working edge polished and clear varnished In PVC holder Long pattern 175 mm Long pattern: 175 mm

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

Surface chrome-plated with black tip With 2-component handle Hard component from PP, non-slip soft component from TPV Contents: TX screwdriver T10 T15 T20 T25 T30 T40 Elongated holes in the handle for hanging up

Swedish pattern, roller with left-hand thread With scale The protected mechanism and additional striking face allow light blows to be applied without impairing the function of the wrench Comfort 2-component handle (versions JC and JP) for fatigue-free wor

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Nearly unbreakable fibreglass handle

For stamping out cardboard, leather, rubber, sealing materials and other soft materials Cutting edge hardened Shaft blue varnished Shaft blue varnished

36 teeth (return angle 10 degrees) High torque transfer Adjustable from 430 to 580 mm without load reduction Telescopic shaft lockable in 5 positions 2-component handle With swivel head for working in confined spaces, swivels through 180° For sockets, acc

RED POWER Lithium Polymer (LiPo) batteries are characterized by an optimal weight/power ratio and are the first choice for almost all applications. Pre-assembled with the leading XT connector system. Low internal resistance for high power handling LMT (L

With same size each end, ring offset at 15°, with UD profile Shaft made in girder pattern GEDORE vanadium steel 31CrV3, chrome-plated Overloading indicated by deformation Secure grip thanks to hollow shaft - very ergonomic and handy Glare-free look due to

MCPower chisel set, 4-piece, pointed, flat, wide chisels and gouge, SDS mount This SDS chisel set is ideal for smaller demolition and cutting operations. Mount: SDS Size of pointed chisel: (ØxL) approx. 14x250 mm Dimensions of flat chisel: (ØxLxW) approx.

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 6.0 x 80, blue galvanised steel, 1x sliding, VE 100 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

With same size each end, ring offset at 15°, with UD profile Shaft made in girder pattern GEDORE vanadium steel 31CrV3, chrome-plated Overloading indicated by deformation Secure grip thanks to hollow shaft - very ergonomic and handy Glare-free look due to

Inexpensive economy model The legs grip automatically The legs grip automatically