Miscellaneous - Gedore, PowerPlus, Romagna Plastic (303)

Flexibility, visibility and quick access to tools, accessories and other parts with the Superclip system. It consists of a tool wall panel (steel perforated plate) and different versions of tool hooks. The clips can be mounted anywhere on the wall and mov

Use: Controlled screw tightening from 60 to 300 Nm Repetition-accurate and precision-like Audible Torque triggering can clearly be heard and felt Clockwise and anti-clockwise tightening from switching over the mushroom head/push-through square Features: A

Made from high-grade chrome-vanadium steel, tempered, 54-56 HRC Lower unscrewing torques thanks to the revised cross-section geometry Reduced drilling depth thanks to an optimised thread length Greater safety for user and component alike Larger applicatio

With strong, non-slip fabric strap Plastic-covered handle Chrome-vanadium steel 31CrV3, chrome-plated

Lever change ratchet, fine-toothed, 72 teeth Extension 125 250 mm T-handle = Adaptor + Extension Universal joint Socket 1/4'' + 1/2'', hex, metric,short, as per DIN 3124, ISO 2725 Socket 1/4'' + 1/2'', hex, metric, long, as per DIN 3124, ISO 2725 Spark pl

Sockets hex 4 4.5 5 5.5 6 7 8 9 10 11 12 13 mm Extension 100 mm T-handle Adaptor 1/4'' sq. dr. - 1/4'' hex dr. Lever change ratchet, fine-toothed, 72 teeth Dimensions: L 190 x W 110 x D 52 mm Bit adaptor 1/4'', with in-hex and female square, for all bits

Chrome-vanadium steel Chrome-plated Jaw set at 15° Ratchet mechanism with 72 teeth Smallest return angle Matt satin chrome-plated finish Chrome-vanadium steel In holder

Highly practical silicone work mat for soldering work or repairing electronic components. Dimensions: 45 x 30 cm Anti-static Heat resistant up to 500°C Wipeable Suitable for soldering electronic components For repairing printed circuit boards etc. 14 stor

Acc. to DIN 3122, ISO 3315 Matt chrome-plated For hand-operated sockets Coupler based on DIN 3120 - A 12,5, ISO 1174, with ball lock Chrome-vanadium steel

The METRAclip 87 clamp multimeter is suitable for the measurement of medium power values in the low-voltage range, and thus offers optimized safety for all types of systems and under any measuring conditions. In addition to applications in the areas of ma

Teeth offset against direction of rotation Roller secured against loss Mouth position 45° angled Teeth offset against direction of rotation Jaws polished Captive adjusting nut Chrome-vanadium steel

In transparent plastic box In transparent plastic box

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Ring offset to 15°, reversible for right and left hand operation Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Matt satin chrome-plated finish Chrome-vanadium steel

Q200 Plus chipboard screw TX, partial thread Thread: 5,0 Thread: 80 mm Steel zinced, Plastic-Box

cross-head PH 1 2 cross-head Pozi PZ 1 2 2C reversible ratchet 1/4'', lever for reversing clockwise/anticlockwise direction, push-button release, fine-toothed, oval head, 2-component-handle for ease in handling, for sockets Extension 50 100 mm Socket 1/4'

In handy sheet metal case In robust sheet metal case

the fischer Power-Fast FPF-ST P chipboard screw is a chipboard screw with a countersunk head, torx TX drive and partial thread. The countersunk head with a torx TX drive guarantees maximum power transmission with maximum bit stability for flush-mounted sc

Stable lock with adjustable strap With flexible straps inside For tools up to 240 mm in length With 8 resp. 12 compartments standard and 1 compartment for small parts Without spanners Without tools

The METRAclip 86 clamp multimeter meets all of the expectations of operations in the electrical trades and is suitable for applications in the low-voltage range with low to medium power values, e.g. maintenance of electrical installations and machinery, t

Ring 15° offset from shaft Hexagon gap 30° offset, UD-section at 15° offset Sizes 8x10 to 12x14 mm with hexagon For applications involving hydraulic/brake lines GEDORE vanadium steel 31CrV3, chrome-plated * not standardised Hexagonal opening 30° offset, U

With 2 hexagons, same size each end Long blade with ball end 2C-T-handle with hanging hole GEDORE vanadium steel 61CrSiV5, chromated Vanadium steel 61CrSiV5, chromated

Jaw set at 15° Chrome-vanadium steel Matt satin chrome-plated finish In the holder In holder

Contents: Pin punches Ø 3 4 5 6 7 8 mm Tempered striking ends Shaft copper, tip paint-coated in silver Made from chrome-vanadium steel In metal case with lid

Loaded magazine screwdriver with ratchet function For precision working in confined spaces Very small return angle, practically 0° (not measurable with mechanical measuring equipment) Very compact 2K handle with bit garage Fibre-glass reinforced nylon and

Acc. to DIN 3113, Form A, ISO 3318, ISO 7738 Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In holder

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Tempered striking ends Shaft copper, tip paint-coated in silver Shaft copper, tip paint-coated in silver Made of chrome-vanadium steel In metal case with lid

Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle No. 2270 5 with adjustable third pressure roller for optimally guiding different pipe dimensions With quick-release Body in pressure-cast aluminium Ename

Acc. to DIN 5128-90, 90 Shore A With 2 flat surfaces With ash handle

Hammer head forged, black varnished, striking face and pein polished Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Acc. to DIN 3113, Form A, ISO 3318, ISO 7738 Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In holder

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Flexible thin shaft for smallest gaps

Slim pattern, oval shaft GEDORE vanadium steel 31CrV3, heads finely polished, chrome-plated * not standardised Jaw: ground precisely to exact nominal size for optimum contact areas Secure grip thanks to slim profile shaft Overloading indicated by deformat

For stamping out cardboard, leather, rubber, sealing materials and other soft materials Cutting edge hardened Shaft blue varnished In plastic wallet no. 570390 In plastic rolling bag

For hand-operated sockets with square drive as per DIN 3120, ISO 1174, with locking pin GEDORE vanadium steel 31CrV3, chrome-plated Vanadium steel 31CrV3, chrome-plated

Square drive as per DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet, lever for reversing clockwise/anticlockwise direction, push-button release, fine-toothed, oval head, dual-material handle for ease in handling, for sockets Square pl

Flexible thin shaft for smallest gaps

Further panels can be added in either direction, with special spacers for wall fitting Made from solid sheet steel 1.5 mm thick, all 4 edges are bevelled Euro perforation 10 x 38 mm Dimensions: L 987 x H 493 mm GEDORE blue powder-coated Tools not supplied