Miscellaneous - Gedore, Romagna Plastic, Sensor (149)

Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle Cutting wheel with high service life No. 2180 3 and 2180 4 body in pressure-cast magnesium, no. 2180 5 body in pressure-cast aluminium No. 2180 5 with qu

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Strong drop forged design Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required By reversing the legs, this tool can be used as an internal or ext

Working edges carefully hardened and tempered Working ends evenly hardened and carefully tempered

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Nearly unbreakable fibreglass handle

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Strong drop forged design Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required By reversing the legs, this tool can be used as an internal or ext

Most used sizes combined in a set Acc. to DIN 896, Form B, ISO 2236, ISO 1085 With hollow shaft, in tubular steel, DIN 2391 seamless, hardened, made from material C35, chrome-plated

Acc. to DIN 5128-90, 90 Shore A With 2 flat surfaces With ash handle

Particularly suitable for barely accessible places For internal and external circlip rings With straight and 90° angled tips In GEDORE i-BOXX® 72, with transparent cover for getting an immediate impression Dimensions: W 367 x D 316 x H 72 mm Dimensions: W

GEDORE vanadium steel 61CrSiV5, sizes 0.7 mm and 0.9 mm gun-metal finish, zinc-plated up to size 12 mm, chrome-plated up from size 14 mm Vanadium steel 61CrSiV5, galvanised

For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391) with 1.0 - 2.0 mm wall thicknesses, composite pipes up to 16 mm as well as bendable stainless steel pipes with 1.0 - 1.5 mm wall thicknesses With 8 bending formers for

With 2 hexagons, same size each end GEDORE vanadium steel 61CrSiV5, chromated, tip gun-metal finish Vanadium steel 61CrSiV5, chromated, burnished tip

For stamping out cardboard, leather, rubber, sealing materials and other soft materials Cutting edge hardened Shaft blue varnished Delivery in GEDORE i-BOXX® 72 no. 1101 L Dimensions: W 367 x D 316 x H 72 mm Dimensions: W 367 x D 316 x H 72 mm

Machine-operated, fixing with safety ring / pin Phosphated surface Coupler in acc. with DIN 3121 - F 12,5, ISO 1174 Square drive as per DIN 3121 - G 12,5, ISO 1174 Chrome-molybdenum steel

In acc. with DIN 6450 In metal case with lid Hot forged Hardened and carefully tempered Safety impact head, blue painted

Use: Controlled screw tightening from 60 to 300 Nm Repetition-accurate and precision-like Audible Torque triggering can clearly be heard and felt Clockwise and anti-clockwise tightening from switching over the mushroom head/push-through square Features: A

Made from high-grade chrome-vanadium steel, tempered, 54-56 HRC Lower unscrewing torques thanks to the revised cross-section geometry Reduced drilling depth thanks to an optimised thread length Greater safety for user and component alike Larger applicatio

With strong, non-slip fabric strap Plastic-covered handle Chrome-vanadium steel 31CrV3, chrome-plated

Chrome-vanadium steel Chrome-plated Jaw set at 15° Ratchet mechanism with 72 teeth Smallest return angle Matt satin chrome-plated finish Chrome-vanadium steel In holder

In transparent plastic box In transparent plastic box

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Ring offset to 15°, reversible for right and left hand operation Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Matt satin chrome-plated finish Chrome-vanadium steel

In handy sheet metal case In robust sheet metal case

Stable lock with adjustable strap With flexible straps inside For tools up to 240 mm in length With 8 resp. 12 compartments standard and 1 compartment for small parts Without spanners Without tools

Ring 15° offset from shaft Hexagon gap 30° offset, UD-section at 15° offset Sizes 8x10 to 12x14 mm with hexagon For applications involving hydraulic/brake lines GEDORE vanadium steel 31CrV3, chrome-plated * not standardised Hexagonal opening 30° offset, U

With 2 hexagons, same size each end Long blade with ball end 2C-T-handle with hanging hole GEDORE vanadium steel 61CrSiV5, chromated Vanadium steel 61CrSiV5, chromated

Jaw set at 15° Chrome-vanadium steel Matt satin chrome-plated finish In the holder In holder

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle No. 2270 5 with adjustable third pressure roller for optimally guiding different pipe dimensions With quick-release Body in pressure-cast aluminium Ename

Acc. to DIN 5128-90, 90 Shore A With 2 flat surfaces With ash handle

Hammer head forged, black varnished, striking face and pein polished Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Acc. to DIN 3113, Form A, ISO 3318, ISO 7738 Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In holder

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Flexible thin shaft for smallest gaps

Slim pattern, oval shaft GEDORE vanadium steel 31CrV3, heads finely polished, chrome-plated * not standardised Jaw: ground precisely to exact nominal size for optimum contact areas Secure grip thanks to slim profile shaft Overloading indicated by deformat

For stamping out cardboard, leather, rubber, sealing materials and other soft materials Cutting edge hardened Shaft blue varnished In plastic wallet no. 570390 In plastic rolling bag

Flexible thin shaft for smallest gaps