Miscellaneous - Gedore, Sensor (233)

In transparent plastic box In transparent plastic box

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Sensor/actuator connection cable M12, A-coded, 5-pin, M12 plug straight - free cable end, PVC, gray, unshielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and conveyor te

Ring offset to 15°, reversible for right and left hand operation Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Matt satin chrome-plated finish Chrome-vanadium steel

cross-head PH 1 2 cross-head Pozi PZ 1 2 2C reversible ratchet 1/4'', lever for reversing clockwise/anticlockwise direction, push-button release, fine-toothed, oval head, 2-component-handle for ease in handling, for sockets Extension 50 100 mm Socket 1/4'

In handy sheet metal case In robust sheet metal case

Sensor/actuator connection cable M12, A-coded, 4-pin, M12 plug straight - free cable end, PVC, gray, unshielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and conveyor tec

Stable lock with adjustable strap With flexible straps inside For tools up to 240 mm in length With 8 resp. 12 compartments standard and 1 compartment for small parts Without spanners Without tools

Ring 15° offset from shaft Hexagon gap 30° offset, UD-section at 15° offset Sizes 8x10 to 12x14 mm with hexagon For applications involving hydraulic/brake lines GEDORE vanadium steel 31CrV3, chrome-plated * not standardised Hexagonal opening 30° offset, U

With 2 hexagons, same size each end Long blade with ball end 2C-T-handle with hanging hole GEDORE vanadium steel 61CrSiV5, chromated Vanadium steel 61CrSiV5, chromated

Jaw set at 15° Chrome-vanadium steel Matt satin chrome-plated finish In the holder In holder

Contents: Pin punches Ø 3 4 5 6 7 8 mm Tempered striking ends Shaft copper, tip paint-coated in silver Made from chrome-vanadium steel In metal case with lid

Loaded magazine screwdriver with ratchet function For precision working in confined spaces Very small return angle, practically 0° (not measurable with mechanical measuring equipment) Very compact 2K handle with bit garage Fibre-glass reinforced nylon and

Acc. to DIN 3113, Form A, ISO 3318, ISO 7738 Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In holder

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Tempered striking ends Shaft copper, tip paint-coated in silver Shaft copper, tip paint-coated in silver Made of chrome-vanadium steel In metal case with lid

Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle No. 2270 5 with adjustable third pressure roller for optimally guiding different pipe dimensions With quick-release Body in pressure-cast aluminium Ename

Acc. to DIN 5128-90, 90 Shore A With 2 flat surfaces With ash handle

Hammer head forged, black varnished, striking face and pein polished Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Acc. to DIN 3113, Form A, ISO 3318, ISO 7738 Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In holder

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Flexible thin shaft for smallest gaps

Slim pattern, oval shaft GEDORE vanadium steel 31CrV3, heads finely polished, chrome-plated * not standardised Jaw: ground precisely to exact nominal size for optimum contact areas Secure grip thanks to slim profile shaft Overloading indicated by deformat

For stamping out cardboard, leather, rubber, sealing materials and other soft materials Cutting edge hardened Shaft blue varnished In plastic wallet no. 570390 In plastic rolling bag

For hand-operated sockets with square drive as per DIN 3120, ISO 1174, with locking pin GEDORE vanadium steel 31CrV3, chrome-plated Vanadium steel 31CrV3, chrome-plated

Square drive as per DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet, lever for reversing clockwise/anticlockwise direction, push-button release, fine-toothed, oval head, dual-material handle for ease in handling, for sockets Square pl

Flexible thin shaft for smallest gaps

Further panels can be added in either direction, with special spacers for wall fitting Made from solid sheet steel 1.5 mm thick, all 4 edges are bevelled Euro perforation 10 x 38 mm Dimensions: L 987 x H 493 mm GEDORE blue powder-coated Tools not supplied

With adjusting screw and release lever Surface chrome-plated With adjusting screw and release lever One-handed operation Chrome-plated surface Chrome-vanadium steel

Reversible for right and left hand operation Will fit any 1/2'' impact socket or bit Manganese-phosphated Manganese phosphated

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Hammer head forged, black varnished, striking face and pein polished Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Universal use for service and assembly work With all advantages of a recoilless hammer with higher impact Less energy necessary, easier working With exchangeable splinter-proof, shatter-proof and wear-resistant polyamide head (E 247), 75 Shore D, tested t

36 1-140 made from C45 steel 36 2-200 made from GEDORE vanadium steel 31CrV3 Chrome-plated

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

The hooks can also be used for bodywork interior lining For working on the interior of the body 1-component handle

With protective surfaces for light-alloy wheels GEDORE vanadium steel 31CrV3, chrome-plated GEDORE vanadium steel 31CrV3, chrome-plated

Acc. to DIN 3113, Form A, ISO 3318, ISO 7738 Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In holder