Miscellaneous - General Electric, Transcend (34)

Engineered to deliver super fast data transfer speeds, the RDF5 USB 3.0 card reader features a SuperSpeed USB 3.0 interface and support for next-generation Ultra High Speed SDHC/SDXC and microSDHC/SDXC cards. Capable of being plugged directly into the USB

Flashing LED, 5 mm, yellow, Coloured diffused housing. Beam angle: 60° VF = 5 V (590 nm)/5 - 32 mcd GaAsP/GaP Manufacturer no.: L-56BYD

3D NAND flash memory DDR3 DRAM cache Advanced global wear levelling and block management for outstanding reliability Built-in LDPC ECC (Error Correction Code) functionality Supports Advanced Garbage Collection, the S.M.A.R.T. function and security com

These LED reflectors by ALBS are no ordinary reflectors. They have been developed further, tested under laboratory conditions and are produced with outstanding attention to detail. They either increase or slightly dampen the colour reproduction value (RA)

Whether photos, music, radio plays, films or entire books - the ever-evolving technology is constantly producing new media formats. Not only a lot of storage space is required, but also a higher speed so that the transmission of the larger amounts of data

recessed mount with external reflector, chrome-plated ready mounted with yellow 3 mm LED Incl. washer and nut Features Installation Ø: 6.0 mm total height: approx. 13.5 mm Reflector head Ø: 6.8 mm Reflector head height: 2.5 mm Wavelength: 585nm yellow

The SSD is intended to replace traditional 2.5'' 44-pin PATA hard disks and help older computer systems to achieve more performance and reliability. Transcend's PSD330 2.5'' PATA SSD is currently available in three sizes: 32 GB, 64 GB and 128 GB. The PSD3

The NA-SAVP6 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP6 anti-vibration pads for up to 2 compatible 200-mm fans (see compatibility information). The anti-vibration pads, made from extra-soft silicone, reduce the transmission

recessed lampholder with internal reflector, chrome-plated ready mounted with yellow 3 mm LED incl. washer and nut Features installation Ø: 6.0 mm total height: approx. 17 mm reflector head Ø: 7.0 mm Reflector head height: 3.0 mm Wavelength: 588 nm y

LED with low power consumption, 2 mA. 5 mm, yellow-coloured housing, diffused Beam angle: 60° (590 nm)/0.8 - 3.2 mcd Manufacturer no.: L-53LYD

With the RDF5 USB 3.0 card reader you can exhaust the full potential of your high-speed memory cards! The support of all common card formats in combination with the performance increase as a result of using USB 3.0 technology makes Transcend's USB 3.0 car

800x CompactFlash (Premium) Ideal for advanced camcorders and DSLR cameras Ultra-fast 800x performance Extra-large storage capacity of up to 256GB Manufactured with brand-name MLC NAND Flash chips Meet Video Performance Guarantee (VPG-20) specificatio

CHIP LEDs, type G0805, Length: 2.0 mm Width: 1.25 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing.

With the RDF5 USB 3.0 card reader you can exhaust the full potential of your high-speed memory cards! The support of all common card formats in combination with the performance increase as a result of using USB 3.0 technology makes Transcend's USB 3.0 car

SATA III 6 Gb/s SSD230S The SATA III 6 Gb/s SSD230S from Transcend uses the latest 3D NAND technology, which stacks memory cells vertically. With high-quality flash memory and advanced firmware algorithms, the SSD230S delivers high performance and reliab

CHIP LEDs, type G0603, Length: 1.6 mm Width: 0.8 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing. Manufacturer no.: KP-1608YD

The NA-SAVP1 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP1 anti-vibration pads for up to 2 compatible 120/140-mm fans. The NA-AVP1 anti-vibration pads are compatible with the following Noctua fans: NF-A14 FLX NF-A14 PWM chromax

SATA III 6 Gb/s SSD230S The SATA III 6 Gb/s SSD230S from Transcend uses the latest 3D NAND technology, which stacks memory cells vertically. With high-quality flash memory and advanced firmware algorithms, the SSD230S delivers high performance and reliab

The NA-SAVP3 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP3 anti-vibration pads for up to 2 compatible 140-mm round frame fans such as the NF-A15 (see compatibility information). The anti-vibration pads, made from extra-soft sil

Stylish and robust. Amazingly fast. The Transcend ESD370C is a handy solid-state drive with a sleek, navy blue silicone rubber enclosure that is durable, robust and shock-resistant. With a USB 3.1 Gen 2 interface and USB Type-C port, you can transfer data

KM-23YD-F Yellow SOT-23 Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Features: • Yellow (GaAsP/GaP) • Lens Type: Yellow Diffused • SOT-23 package surface mount LED

SMD Mini PLCC2 reflector LED for all kind of soldering methods usable, especially if customers like to have an LED with metal leadframe, but in a very small housing

Ultra-bright LED, 3 mm, yellow. Coloured housing, transparent. Beam angle: 50° (590 nm)/10 - 50 mcd

Protected and ready. Transcend's StoreJet 25M3 robust external hard drive combines supreme shock-resistant qualities with the USB 3.1 Gen 1 interface, delivering ultra-fast file transfers and secure storage for your data. Robust and mobile The StoreJet

CHIP LEDs, type G1206, Length: 3.2 mm Width: 1.6 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing. Manufacturer no.: KP-3216YD

The SATA III 6 Gb/s SSD220S from Transcend uses the latest 3D NAND technology, which stacks memory cells vertically. With high-quality flash memory and advanced firmware algorithms, the SSD220S delivers high performance and reliability. Unlimited 3D exten

SMD LED with dome lens, yellow, 568 nm, 300 mcd Clear housing Radiation angle: approx. 50° Dimensions (L x W x H): 3.2 x 1.6 x 1.9mm Manufacturer no.: KPTD-3216SYC

Duo-LED, 3 mm, 2-pin, colour change via polarity reversal. red/yellow Colourless housing, diffused Beam angle: 60° 20 mA 8 - 40 mcd

Stay rugged. Stay trendy. Longevity does not always have to be at the expense of design. The StoreJet 25A3 external hard drive offers an impressive anti-shock system without compromising on its sleek appearance. With a USB 3.1 Gen 1 interface, a multifun

The SATA III 6 Gb/s SSD220S from Transcend uses the latest 3D NAND technology, which stacks memory cells vertically. With high-quality flash memory and advanced firmware algorithms, the SSD220S delivers high performance and reliability. Unlimited 3D exten

recessed lampholder with external reflector, chrome-plated ready mounted with yellow 5 mm LED. Incl. washer and nut Features Installation Ø: 8.0 mm Total height: approx. 15.5 mm Reflector head Ø: 9.8 mm Reflector head height: 3.5 mm Wavelength: 590nm

SATA III 6 Gb/s SSD230S The SATA III 6 Gb/s SSD230S from Transcend uses the latest 3D NAND technology, which stacks memory cells vertically. With high-quality flash memory and advanced firmware algorithms, the SSD230S delivers high performance and reliab

Combining the already impressive Class 10 specification with the performance boost of UHS-I, Transcend's Class 10 SDXC/SDHC Ultra High Speed memory cards help your camera unleash its full potential. When paired with UHS-I compatible devices, these cards o

3D NAND flash memory DDR3 DRAM cache Advanced global wear levelling and block management for outstanding reliability Built-in LDPC ECC (Error Correction Code) functionality Supports Advanced Garbage Collection, the S.M.A.R.T. function and security com