Miscellaneous - General Electric, Trend (68)

The laser rangefinder enables the contactless measurement of distances up to 40 m. In addition, it has a conventional, extendable measuring tape for measuring shorter distances of up to 5 m. Measuring range up to 40 m (laser) or 5 m (mechanical measuring

The UPO1002 series of digital phosphor oscilloscopes uses the innovative Ultra Phosphor 2.0 technology with an upgraded look and features such as deep memory, high waveform acquisition rate, real-time waveform recording and playback, and 256-point greysca

Flashing LED, 5 mm, yellow, Coloured diffused housing. Beam angle: 60° VF = 5 V (590 nm)/5 - 32 mcd GaAsP/GaP Manufacturer no.: L-56BYD

The UT622A handheld LCR meter offers powerful features, a high degree of accuracy, fast measurement speed and long standby time. With a clear and intuitive 2.8-inch TFT LCD display, a large-capacity battery and a test frequency of up to 10 kHz, this meter

These LED reflectors by ALBS are no ordinary reflectors. They have been developed further, tested under laboratory conditions and are produced with outstanding attention to detail. They either increase or slightly dampen the colour reproduction value (RA)

The UT330TH/UT330THC USB data loggers use high-precision temperature and humidity sensors to monitor and record over a long period of time. They are ideal tools for monitoring temperature and humidity sensitive goods such as pharmaceuticals and perishable

The UT 8800 series are optically appealing and very robust table multimeters. These can be operated simply and intuitively and are therefore ideal for use in production, development, schools, universities and laboratories. The modern LED display, which is

recessed mount with external reflector, chrome-plated ready mounted with yellow 3 mm LED Incl. washer and nut Features Installation Ø: 6.0 mm total height: approx. 13.5 mm Reflector head Ø: 6.8 mm Reflector head height: 2.5 mm Wavelength: 585nm yellow

The UT622E handheld LCR meter offers powerful features, a high degree of accuracy, fast measurement speed and long standby time. With a clear and intuitive 2.8-inch TFT LCD display, a large-capacity battery and a test frequency of up to 100 kHz, this devi

The UPO1000 series of the digital phosphorus oscilloscopes utilises UNI-T 3D Ultra Phosphor 2.0 technology and offers a new design upgrade as well as features such as deep storage, a high waveform capture rate, real-time waveform recording and playback an

TrueRMS mini current clamp UT210D. The functions and features: Current measurement up to 200 A AC / DC Voltage measurement up to 600 V AC/DC Resistance measurement up to 20 MOhm Frequency measurement up to 60 kHz Capacitance measurement up to 20 mF T

The NA-SAVP6 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP6 anti-vibration pads for up to 2 compatible 200-mm fans (see compatibility information). The anti-vibration pads, made from extra-soft silicone, reduce the transmission

The probes from the UT-P00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits desc

recessed lampholder with internal reflector, chrome-plated ready mounted with yellow 3 mm LED incl. washer and nut Features installation Ø: 6.0 mm total height: approx. 17 mm reflector head Ø: 7.0 mm Reflector head height: 3.0 mm Wavelength: 588 nm y

The UT 8800 series are optically appealing and very robust benchtop multimeters. These can be operated simply and intuitively and are therefore ideal for use in production, development, schools, universities and laboratories. The modern LED display, which

LED with low power consumption, 2 mA. 5 mm, yellow-coloured housing, diffused Beam angle: 60° (590 nm)/0.8 - 3.2 mcd Manufacturer no.: L-53LYD

The UPO1002 series of digital phosphor oscilloscopes uses the innovative Ultra Phosphor 2.0 technology with an upgraded look and features such as deep memory, high waveform acquisition rate, real-time waveform recording and playback, and 256-point greysca

The probes from the UT-P00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits desc

UTx318M is a lighter thermal imaging monocular equipped with a 400×300 IR detector and a 0.39'' OLED screen. Fits perfectly in the palm of your hand and is super compact. Perfect for long-term use thanks to the replaceable battery. With the ''Thermal Xpl

UT-Z003 is a macro lens suitable for the UNI-T thermal imaging cameras UTi730E/UTi720E/UTi730V/UTi720V. It is a perfect add-on adapter for thermal imaging cameras to detect tiny electrical components that overheat. Engineers can easily perform circuit loa

UTx325M is a lighter thermal imaging monocular equipped with a 400×300 IR detector and a 0.39'' OLED screen. Fits perfectly in the palm of your hand and is super compact. Perfect for long-term use thanks to the replaceable battery. With the ''Thermal Xpl

TrueRMS mini current clamp meter UT210B. Functions and characteristics: Current measurement up to 200 A AC TRMS true RMS measurement Current clamp for conductors up to 17 mm in diameter Non-contact voltage testing Data hold Min/max function Relative

The UTD2152CL offers an easy-to-use interface with simple functions. The AUTO button allows you to quickly view the waveform and device settings. It has two analogue channels, a high-resolution LCD display (800x480) and USB support for storage devices or

Passive high-voltage probe The UT-P20 is a high-voltage probe with low input capacitance that has been designed and calibrated for use with devices that have an input resistance of 1 MOhm at 20 pF input capacitance. However, it is also possible to compens

UPO1000CS series The UPO1000CS series is a multifunctional, cost-effective digital phosphor oscilloscope. It can be used in electronic and electrical design, troubleshooting, education and industrial design. The UPO1000CS series uses parallel digital sig

CHIP LEDs, type G0805, Length: 2.0 mm Width: 1.25 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing.

The UTD2000CEX+ offers an advanced trigger mode, 34 types of automatic parameter measurement and common mathematical operations. Panel operation is optimised, which significantly increases work efficiency, and the measurement requirements of complex signa

The new multifunctional voltage tester series UT18 from Uni-T enables the quick and easy testing of DC and AC voltages and the testing of the phase rotation direction (rotating field test). All types of the series are furthermore equipped with a switchabl

Uni-Trend - sound level meter This new digital sound level meter with a high accuracy of +/- 1.5dB and a large, backlit and well-organised digital LCD display with bar graph is perfectly suited for use in all relevant areas. Use the measuring device for n

The UTD1050CL is an economical handheld digital storage oscilloscope with 50-MHz bandwidth and a sampling rate of 2000 MSa/s. It integrates an oscilloscope, a multimeter, a trend chart and a waveform recording function. The compact and portable design pro

The probes from the UT-P00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits descr

CHIP LEDs, type G0603, Length: 1.6 mm Width: 0.8 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing. Manufacturer no.: KP-1608YD

R/C pin gauge for SMD components. This device is ideal for measuring SMD components quickly, easily and precisely. The tweezers are equipped with a 180° rotating device which makes operation and reading much easier. Ideal for use in the service and train

The UTE9800+ series is a cost-effective, portable and intelligent measuring instrument for electrical parameters. It is a multifunctional measuring device that integrates voltage, current, power, power factor and frequency. Offering excellent value for mo

The NA-SAVP1 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP1 anti-vibration pads for up to 2 compatible 120/140-mm fans. The NA-AVP1 anti-vibration pads are compatible with the following Noctua fans: NF-A14 FLX NF-A14 PWM chromax

UTG1022X Die UTG1000X-Serie bietet eine präzise und stabile Wellenformausgabe mit einer Auflösung von nur 1µHz. Es handelt sich um einen wirtschaftlichen, leistungsstarken und multifunktionalen Funktions-/Arbiträrwellenformgenerator. Es können genaue, st

The UT8804E is a desktop digital multimeter with auto-ranging, 59,999 counts and true RMS measurement, a frequency response of 100 kHz and a 4.3-inch TFT LCD. It features a VFC low-pass filtering function that reduces the impact of high-frequency signals

The NA-SAVP3 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP3 anti-vibration pads for up to 2 compatible 140-mm round frame fans such as the NF-A15 (see compatibility information). The anti-vibration pads, made from extra-soft sil

The UPO1000 series of the digital phosphorus oscilloscopes utilises UNI-T 3D Ultra Phosphor 2.0 technology and offers a new design upgrade as well as features such as deep storage, a high waveform capture rate, real-time waveform recording and playback an

KM-23YD-F Yellow SOT-23 Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Features: • Yellow (GaAsP/GaP) • Lens Type: Yellow Diffused • SOT-23 package surface mount LED