Miscellaneous - Givenchy, iRobot, Papst, Romagna Plastic (45)

The connectors have been developed for use in systems-, control- and electrical equipment engineering. It is the responsibility of the user to check whether the connectors can also be used in other areas of application. To protect against unintentional op

EBM-papst connection cable 610 mm • For AC axial fans 119 x 119 mm • With wire end ferrules • Length: 610 mm

• Rigid compression curve for high volume flow at high counterpressure • Innovative fan wheel with winglets for low noise General properties: • Material: Fibreglass-reinforced plastic, fan wheel: PA, housing: PBT • Fully integrated electronic commutation

EC axial fan 230 VAC 50/60 Hz counterclockwise Ball bearing-IP54-Iso.Kl. B Control input 0-10 VDC / PWM Plug

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

8-Pin Flash, 8-Bit Microcontrollers High-Performance RISC CPU: • C Compiler Optimized Architecture • Only 49 Instructions • Operating Speed: - DC – 20 MHz clock input, - DC – 200 ns instruction cycle • Interrupt Capability with Automatic Context Saving •

Coding pin, for type D, E, F and transition elements I, metal, RAL 7032 (pebble gray)

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

EC radial module RadiCal VBH0225RSLFS 200-240 VAC-50/60 Hz clockwise rotating Ball bearing, IP54, insulation class B Control input 0-10 V / PWM Electronic motor protection Cable 330 mm

Replacement heating element for the I-Tool Trace, I-Tool PICO MK2 soldering irons

• Rigid compression curve for high volume flow at high counterpressure • Innovative fan wheel with winglets for low noise General properties: • Material: Fibreglass-reinforced plastic, fan wheel: PA, housing: PBT • Fully integrated electronic commutation

• AC fan with external rotor shaded-pole motor • Protected against overloading through impedance protection • Metal fan housing and fan blade wheel • Direction of flow: Air outlet over struts • Direction of rotation: right, when viewed from the rotor • El

Microchip PIC controller — high-performance RISC CPU Microchip supports the entire performance range from 8-bit, 16-bit and 32-bit microcontrollers with a powerful architecture, flexible storage technologies and extensive easy-to-use development tools, as

• Rigid compression curve for high volume flow at high counterpressure • Innovative fan wheel with winglets for low noise General properties: • Material: Fibreglass-reinforced plastic, fan wheel: PA, housing: PBT • Fully integrated electronic commutation

Compact fan 172x51 mm 230 VAC-50/60 Hz Förd. V Ball bearing-IP20-I.KL. B TW-design Paintwork: Device black Plug 2.8x0.5 mm n.LV 2053

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

ebm-papst fans have set the standard in electronic cooling for decades. Compact, quiet and highly efficient, the energy-saving fans adapt to cooling needs and can be intelligently networked with the device logic. Radial fans Radial fans are superior high-

EC axial fan 230 VAC 50/60 Hz counterclockwise Ball bearing-IP54-Iso.Kl. B Control input 0-10 VDC / PWM Plug

PIC16F690 Description: The Low Pin-count (20) PIC® Flash microcontroller products offer all of the advantages of the well recognized mid-range x14 architecture with standardized features including a wide operating voltage of 2.0-5.5 volts, on-board EEPROM

• 92 x 92 mm

PIC12F675 8-Pin Flash-Based 8-Bit CMOS Microcontroller High-Performance RISC CPU: • Only 35 Instructions to Learn - All single-cycle instructions except branches • Operating Speed: - DC – 20 MHz oscillator/clock input - DC – 200 ns instruction cycle • Int

14/20-Pin 8-Bit Advanced Analog Flash Microcontrollers High-Performance RISC CPU • C Compiler Optimized Architecture • Only 49 Instructions • Up to 14 Kbytes Linear Program Memory Addressing • Operating Speed: - DC – 32 MHz - DC – 125 ns instruction cycl

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

Insulated BNC adapter plug for 4-mm safety plugs. 500 V/cat. I

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

PIC16F870/871 28/40-Pin, 8-Bit CMOS FLASH Microcontrollers Microcontroller Core Features: • High performance RISC CPU • Only 35 single word instructions to learn • All single cycle instructions except for program branches which are two-cycle • Operating s

• with external rotor capacitor motor with thermal overload protection • metal housing and impeller • blowing over jetties

Network card for the Ersa I-CON Trace

ebm-papst fans have been the benchmark in electronics cooling for decades. Compact, quiet and highly efficient, the energy-saving fans adapt to the cooling situation and can be intelligently networked with the device logic. Axial fans Axial fans are suita

ebm-papst fans have set the standard in electronic cooling for decades. Compact, quiet and highly efficient, the energy-saving fans adapt to cooling needs and can be intelligently networked with the device logic. Axial fans Axial fans are suitable for hig

Replacement heating element for the I-Tool NANO MK2 soldering irons

8-Pin, Flash-Based 8-Bit CMOS Microcontrollers High-Performance RISC CPU: • Only 35 Instructions to Learn - All single-cycle instructions except branches • Operating Speed: - DC – 20 MHz oscillator/clock input - DC – 200 ns instruction cycle • Interrupt C

• Plastic wing material • Seven rotor blades, backward curved, single inlet • With internally switched temperature monitor as motor protection

EC radial module - RadiCal 200-240 VAC-50/60 Hz Ball bearing, insulation class B, IP54 Electronic motor protection Control input 0-10 VDC Cable length 320 mm

•All-metal design with aerodynamically optimized Impeller • Drive by external rotor- Shaded-pole motor • Rotor in two planes dynamically balanced • Fan blade made of sheet steel directly on the surrounding Rotor welded • Direction of rotation on Rotor see

Microchip PIC controller - high-performance RISC CPU Microchip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with powerful architecture, flexible storage technologies and extensive user-friendly development tools, as

i-TOOL PICO MK2 soldering iron with max. 80 W micro high-power heating element: The new Tip'n'Turn technology enables faster and safer tip changes by using a new bayonet mount. In addition to improved ergonomics, the 142 tip series offers improved heat tr

Professional measurement in a small format: The compact testo 410i vane anemometer with smartphone operation measures the volume flow, air velocity and temperature at the air outlet quickly and reliably. The testo Smart Probes app provides convenient read

FlowGrid preguide grid 119x119 mm Glass fiber reinforced plastic (PA) Note: Use with axial and diagonal fans The inlet-side preguide grille drastically reduces drastically reduce noise emissions and minimize minimize disturbing low-frequency sounds.