Miscellaneous - GoPro, M-Tech, Noiseblocker, Wera (126)

Includes handlebar/seat post/pole mount, large rubber insert, small rubber insert, compact bag, vertical mounting buckle and thumb screw Hinged, non-slip design sets up in seconds and clamps to any 9- to 35-mm diameter tube Rotating base features 360° r

Bit holder for countersinking screws in flush with the surface of wooden decking boards With variably adjustable screw depth limiter Felt ring (replaceable) prevents traces of grinding on the decking surface Also included: two spare felt rings Output: S

This 18-watt LED glass tube measures 120 cm. As with conventional versions, the LED-powered tube also has a standard G13 base, making it a quick like-for-like replacement. The warm white light emitted by the LED tube is distributed evenly over the opal gl

12 V multicolor LED light strip (RGB + white) from OPTONICA LED on flexible strip for decorative lighting. The LED strip has bright and long-life RGB (red, green, blue) and white LEDs. This allows you to create not only standard colors (red, green, constr

KP-2012SURCK, Hyper Red (AlGaInP), Water Clear, 120...230mcd, 2.0 x 1.25 mm SMD Chip LED Descriptions: • The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode • Electrostatic discharge and power surge could damage

Universal holder for the take-up of bits with ¼ hexagon head drive as per DIN ISO 1173-C 6.3. Stainless sleeve for special corrosion protection. ¼ hexagon, suitable for power screwdrivers with a take-up as per DIN ISO 1173-F 6.3.

Includes head strap, top strap, buckle mount and thumb screw. Three attachment options: complete setup with headband and top strap, attachment only using the head strap or only using the buckle mount. The full setup with head strap and upper strap provi

The JARO 20060 M LED spotlight from Brennenstuhl is an extremely energy-efficient LED floodlight with 150 W power that meets the highest demands. It also impresses with its extremely flat design and robustness. The built-in Everlight SMD LEDs ensure an ex

One Rapidaptor bit holder with quick-release chuck, 29 BiTorsion bits for long life, diamond-coated (BDC) for secure screw fit. One of the biggest problems with mechanical screw fittings is that the screwdriver quickly slips out of the screw head. Screw h

The JARO 14060 M LED spotlight from Brennenstuhl is an extremely energy-efficient LED floodlight with 100 W power that meets the highest demands. It also impresses with its extremely flat design and robustness. The built-in Everlight SMD LEDs ensure an ex

Contains one Enduro rechargeable battery Advanced 1720 mAh lithium-ion battery that can be used as a spare for the battery supplied with the HERO12 Black or HERO11 Black Improves the performance of the HERO10 Black compared to the conventional GoPro bat

Universal holder for the take-up of bits with ¼ hexagon head drive as per DIN ISO 1173-C 6.3. Quick-release chuck for rapid bit change. ¼ hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

Noiseblocker is passionate about extremely quiet fans. The Multiframe models in particular, with an innovative housing and suspension, are the flagships in the company’s range. Noiseblocker is expanding its offerings to include very small fans in the Blac

The mobile JARO 3060 M LED spotlight from Brennenstuhl is an extremely energy-efficient LED construction spotlight with 20 W power that meets the highest demands. It also convinces with its extremely flat design and its compactness. The built-in Everlight

Jaws: Flex Clamp Clamp your GoPro to objects ranging in size from 0.6 to 5 cm in diameter. Attach your camera directly to the clamp for low-profile mounting, or use the optional neck to achieve a wider range of camera-angle adjustability. Jaws securely g

Noiseblocker is particularly well-known for its Black Silent fan and Ultra Silent Fan series - using these quiet fans, noise and any vibration in the housing can be greatly reduced. With the brand new and innovative Multiframe S-series, Noiseblocker prese

The 24-watt LED glass tube measures 150 cm and shines in a cold white light. This light is particularly suitable for areas with little to no natural light. The light is distributed evenly thanks to the opal glass cover and ensures uniform illumination. Th

Noiseblocker is the specialist in particularly quiet fans. In order to achieve this, the company relies on maximum quality with low manufacturing tolerances and a high level of technological know-how with German engineering. In addition, the manufacturer

Expand your mounting options, or use as a resource for spare parts Give yourself more mounting options for your GoPro with this Grab Bag of mounts and spare parts. Includes Curved and Flat Adhesive Mounts, two mounting buckles, a 3-Way Pivot Arm, plus a

One bit holder Rapidaptor with quick-release chuck, 11 BiTorsion bits for long service life, diamond-coated (BDC) for secure grip in the screw. One of the greatest problems for machine screwing is that the tool easily slips out of the screw head. As a res

A hole in the door lets you connect your camera to an external power source while keeping the battery securely in place A specially designed cable/pass-through seal makes your camera weather-resistant for outdoor adventures (when using a GoPro USB-C cabl

Universal holder for the take-up of bits with ¼ hexagon head drive as per DIN ISO 1173-C 6.3. Quick-release chuck for rapid bit change. ¼ hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

Noiseblocker is passionate about extremely quiet fans. The Multiframe models in particular, with an innovative housing and suspension, are the flagships in the company’s range. Noiseblocker is expanding the range to include very small fans with the BlackS

8-piece set, with strong permanent magnet, in convenient belt pouch. Drive: 1/4'' hexagon for machine receiver Output: 1 x 7.0x50.0 1 x 8.0x50.0 1 x 10.0x50.0 1 x 12.0x50.0 1 x 13.0x50.0 1 x 1/4''x50.0 1 x 5/16''x50.0 1 x 3/8''x50.0

IP54 waterproof 12 V LED light strip from OPTONICA LED on flexible strip for decorative lighting. The LED strip has a beam angle of 120°, is equipped with high-quality and long-life LEDs and is ideal for private and business use. Also ideal for outdoor us

Noiseblocker is passionate about extremely quiet fans. The Multiframe models in particular, with an innovative housing and suspension, are the flagships in the company’s range. Noiseblocker is expanding the range to include very small fans with the BlackS

6 Wera Pozidriv* bits tidily arranged in a minimum of space in a practical Bit-Check. Tough viscous Wera bits for hexagon head screws and universal use. 1 universal holder 893/4/1 K for insertion in the power screwdriver or for use in the chuck of the e

Kraftform Kompakt Stubby Magazine 4, 6 pieces Use: Suitable for bits with 1/4-inch hexagon drive in line with DIN ISO 1173-C 6.3 and Wera Connection Series 1 Design: Bit holder with strong permanent magnet, bits, tough (Z), for universal use. Handle: Kraf

Particularly small bitholding screwdriver with extremely short bit mounting for hard to reach areas. With ratchet function and fine toothing for a low return angle. Easy-to-operate reversible ring (right, fixed, left). Includes 6 tough, universal bits, wh

The 9-watt LED glass tube from the BLULAXA® range measures 60 cm and shines in a cold white light. This light is distributed evenly over the entire surface of the opal glass cover and is particularly suitable for areas with little to no natural light. The

Noiseblocker is the silent fan already made famous by the BlackSilentFan and UltraSilentFan series. The super-quiet fan significantly reduces the noise and vibrations generated in the housing. The previous series have already impressed with their outstand

The 24-watt LED glass tube from the BLULAXA® range measures 150 cm and is the ideal replacement for conventional 58-watt T8 fluorescent tubes. A long service life is just one feature of the 24-watt LED glass tube. The warm white light of the LED-powered i

Suction Cup Mount Attach your GoPro to cars, boats, motorcycles and more. This industrial-strength Suction Cup mount is proven at speeds of 150+ mph and engineered for stability and a broad range of motion. The short extension arm allows for ultra-compac

Kraftform Kompakt Stubby magazine 3, 6 pieces Short, compact Stubby shape for working in tight installation spaces, with 6 bits in the integrated magazine Ergonomic two-component Kraftform handle for precision working 1/4-inch bit chuck with strong perm

Contains 1 Floaty for the HERO11 Black Mini and 1 long thumb screw. Bright orange and easy to pick out, so you can quickly find your camera in the water Easy access to the camera buttons, status screen and lower folding fingers means that you can quickl

Application: Manually operated nut spinner sockets Output: 3/8'' external square Drive: 5/16'' external hexagon

Nous F4 Smart RGBIC LED strip, 5 m If you are looking for a smart home device that can transform your living space with stunning lighting effects, the Nous F4 5m Smart RGBIC WIFI LED Strip is just what you are looking for. This product is a smart WIFI LED

Noiseblocker is the specialist in particularly quiet fans. In order to achieve this, the company relies on maximum quality with low manufacturing tolerances and a high level of technological know-how with German engineering. In addition, the manufacturer

Bit-Safe 61 Universal 4, 61 pieces 61 pieces 1 universal holder 899/4/1 K for holding in the power tool or for use in the drill chuck of the electronic power drill.

Bits und Halter-Set, besonders geeignet für die Holzbearbeitung. Die Bits 867/1 TORX® HF halten durch ihre spezielle Geometrie TORX® Schrauben nach Spezifikation Acument Intellectual Properties sicher auf dem Werkzeug! Das ist besonders hilfreich in schwe