Miscellaneous - Knipex, Logitech, Printer Maniak, Romagna Plastic (200)

pliers chrome plated, handles with multi-component grips

pliers chrome plated, handles with multi-component grips

Electronic side cutters, Super-Knips. Play-free joint, extremely effortless motion, precision-milled. cutting edges without grinding, with opening spring and limiter. Length 125 mm, narrow head, without bevel Cutting force: soft wire from 0.2 to 1.0 mm in

Electronic gripping pliers For precision work on electronic parts. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 145 mm, Flat-round, long jaws.

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 160 mm Head chrome-plated, handles VDE-insulated 1000 V. Stripping values: 0.5 to 5 mm diameter

head mirror polished, handles with multi-component grips, Oblique End Cutter, short head Style 5: Oblique End Cutter, short head, without bevel, for flush cutting, a = 27°

tool burnished, handles with multi-component grips

With replaceable blades for four or six different conductor cross-sections Conductor is not damaged thanks to precisely ground shaped blade, even fine-stranded wire are gently stripped Clamping jaws hold the wire firmly while stripping With adjustable

pliers grey atramentized, head polished, handles with slim multi-component grips

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

For Knipex Crimp System Pliers For non-insulated tubular cable lugs and crimp terminals in accordance with DIN 46237 and non-insulated butt and crimp connectors in accordance with DIN 46341.

pliers grey atramentized, head polished, handles with slim multi-component grips

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

Electronics side cutters for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length: 115 mm, round Head shape, without bevel Cutting force: Soft wire from 0.3 to 1.3 mm diam

For burr-free cutting of plastic piping (e.g. plastic reinforced pipes) with a diameter of 6 - 35 mm Not suitable for cable cutting Blades can be replaced and can be retrieved from any position Little force is required thanks to special cutting geometr

pliers chrome plated, handles with multi-component grips

Alligator® Set

chrome plated, handles with multi-component grips

pliers burnished, handles with multi-component grips, with 3 interchangeable crimping dies

pliers chrome plated, handles with multi-component grips

Identical to KN 35 22 115 yet with dissipative handle casings for electro- static protection.

pliers chrome plated, handles with multi-component grips, with integrated tether attachment point for a tool tether

non-insulated terminals + cable connectors

liers black lacquered, handles with multi-component grips insulated terminals + cable connectors 0,75 - 6,0 / 18 - 10

Identical to KN 78 61 125 yet with dissipative handle casings for electro-static protection. The slight offset of the cutting edges is by design, so that sharpness remains for longer.

pliers black atramentized, head polished, handles plastic coated

KNIPEX flat nose pliers 160 mm, VDE g-tested • Flat, short, wide jaws • Serrated gripping surfaces • Chrome vanadium electric steel, forged, oil-hardened Length: 160 mm

Side cutters for universal use, with inductively hardened precision blades, chrome-plated head, normal bevel, length 140 mm. Plastic sleeves VDE-insulated, 1000 V, IEC 900 Cutting force: Soft wire up to 4.0 mm in diameter, hard wire up to 1.8 mm in diamet

non-insulated open plug type connectors (plug width 2.8 + 4.8 mm)

Super-Knips 64 HRC Made of special tool steel with burnished head. Precision-milled cutting edges for co-extensive cutting. Blades additionally inductively hardened. Suitable for cutting fibre-optic cable. The slight offset of the cutting edges is by desi

Electronic gripping pliers For precision work on electronic parts. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 145 mm, Flat, long jaws.

Electronics side cutters for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 115 mm, round head shape, small bevel Cutting force: Soft wire from 0.3 to 1.6 mm in diam

pliers black atramentized, head polished, handles plastic coated

6 parts, contains 6 ESD precision electronics pliers, electrically discharging version case made of hard-wearing polyester fabric, pliers are held by elastic band, zippered

Crimp Assortment in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening when connected: fast and simple access to content without discon

1000 x 1000

tool chrome plated, handles insulated with multi-component grips, VDE-tested Style 2: internal opening spring, protected and captive

Equipped with standard circlip pliers for inner and outer rings Attractive sales packaging with SB hole Robust plastic packaging, also suitable for continued storage of the pliers 8-piece

Self-adjusting crimping pliers with side entry for DIN-compliant crimping of wire end ferrules in a profile from 0.08 - 10 mm². Square crimping always ensures optimal contact surfaces. Easy handling, force strengthening, self-releasing lock.