Miscellaneous - Knipex, PowerPlus, Romagna Plastic (241)

insulated and non-insulated end sleeves (ferrules)

pliers chrome plated, handles with multi-component grips

pliers bright zinc plated, jaws with double prism Style 1: jaws with double prism for round, section and flat material

trapezoidal tips straight pattern gripping surfaces with fine transverse serration serrated handles

Knipex crimping die For KN 97 43. For insulated cable shoes 0.5-10 mm².

Side cutters for universal use, with inductively hardened precision blades, chrome-plated head, standard bevel, length 125 mm. Plastic sleeves VDE-insulated, 1000 V, IEC 900 Cutting force: Soft wire up to 3.0 mm in diameter, hard wire up to 1.5 mm in diam

Pantograph pliers produced from oil-hardened vanadium steel. 2-component handles, VDE-insulated, 1000 V In accordance with IEC 60900/DIN EN 60900. Long flat-round jaws with serrated gripping surfaces with 40° curved shape. Blades additionally inductively

Compact Bolt Cutters for powerful cutting of larger cross-sections as well as very hard materials two-hand operation for maximum cutting force 60 % less effort required compared to high leverage diagonal cutters of the same size 40-fold increase of manual

With sharp, precise cutting edges for soft or hard wire, including piano wire Cutting edges inductively hardened, cutting hardness approx. 63 HRC Inlaid joint Vanadium electric steel, forged, oil-hardened

Electronics gripping pliers for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length: 115 mm Flat-wide jaws

Assortment box with insulated ferrules: 0.25 - 1.0 mm² 30x 0.25 mm² in blue 30x 0.34 mm² in turquoise 30x 0.50 mm² in white 30x 0.75 mm² in black 30x 1.00 mm² in red

In TANOS MINI-systainer® (robust plastic box) Two stackable plastic inserts with six trays each for connectors With an assortment of wire end ferrules with/without plastic collars Included in delivery 97 90 09 No. 97 53 04 self-adjusting crimping pliers f

pliers chrome plated, handles insulated with multi-component grips, VDE-tested Style 1: long, trapezoidal jaws, knurled gripping surfaces

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

Tube cutter produced from tough, glass-fibre-reinforced plastic 185 mm For cutting thin-walled plastic tubes (e.g. plastic armoured flexible tubing) and hoses, including fabric-reinforced tubing, made of plastic and rubber up to 25 mm outer diameter. Not

INOX stainless steel, head polished, handles with multi-component grips, INOX - stainless steel

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

Rubber cover cloth for protection when working on live parts. VDE-tested 1000 V. Size: 500 mm x 500 mm.

Precision pliers for delicate assembly tasks, e.g. in electronics and precision mechanics. For gripping, holding and bending. Box precision joint. Smooth, ground gripping surfaces. Edges carefully deburred. Low-friction double spring for gentle and smo

Identical to KN 78 71 125 yet with dissipative handle casings for electro- static protection.

Assortment box with insulated ferrules: 4.0 - 16.0 mm² 50x 4.0 mm² in grey 20x 6.0 mm² in yellow 20x 10.0 mm² in red 10x 16.0 mm² in blue

Q200 Plus chipboard screw TX, partial thread Thread: 6,0 Thread: 120 mm Steel zinced, Plastic-Box

Solvent-free two-component adhesive on epoxy resin basis for particularly fast adhesion on small surfaces. The processing time is up to 2 minutes, and hand-tightness is achieved after 5 minutes. The final strength is approx. 800 N/cm². The bonded joint ha

pliers black atramentized, head polished, handles with multi-component grips

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Precision cutting edges for soft and hard wire, as well as piano wire. Cuts components such as bolts, nails, rivets etc. up to 5.2 mm in diameter. Particularly high cutting performance with less effort owing to highly effective articulated design. Blades

Adjustment by pushing a button directly on the workpiece. Fine adjustment: for optimum adaptation to different workpiece sizes and hand-friendly handle positions. Self-locking on pipes and nuts: no slipping on the work piece, energy-saving work. Gripping

straight pattern fine tip smooth gripping surfaces

pliers black lacquered, handles with multi-component grips non-insulated open plug-type connectors (plug width 6.3 mm)

Solvent-free two-component adhesive on epoxy resin basis for highest loads. The processing time is up to 90 minutes. Curing time and final strength are temperature-dependent. At room temperature, solid after 12 hours. The bonded joint is impact-resistant,

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors • With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high

In TANOS MINI-systainer® (robust plastic box) Two stackable plastic inserts with six trays each for connectors With an assortment of common cable connectors Included in delivery 97 90 21 (13) No. 97 52 36 KNIPEX PreciForce® 1 97 99 01 blade receptacles 25

Cable cutter for cutting flat ribbon cabling up to 56 mm in width without crushing. Replaceable cutting support and stop angle for right-angled cutting. Replaceable standard blades. Length 215 mm, nickel-plated.

Lightweight design made from durable, reinforced polyester fabric Front wall also reinforced with aluminium brackets Front wall can be partly folded with adjustable loops and with an exterior document pocket With galvanised base pan With carry handle

Parabolic replacement blades for KNIPEX PreciStrip16 .

For Knipex Crimp System Pliers For non-insulated terminals + cable connectors.

Snipe nose pliers with cutter (radio pliers) With inductively hardened blades. Length: 160 mm Chrome-plated head, serrated gripping surfaces. Grip casings VDE-insulated 1000 V/IEC 900. Cutting force: approx. 60 HRC Soft wire up to 2.5 mm in diameter, Medi

pliers black atramentized, handles with slim multi-component grips, with recess for easier cutting of thicker wires Style 3: the recess in the blade allows easier cutting of thicker wires, e. g. for anchor bolts in false ceilings