Miscellaneous - Knipex, Romagna Plastic, Sensor (397)

Knipex crimping die For KN 97 43. For coax connectors RG58/59/62/71.

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

KNIPEX Smart-Grip water pump pliers, 250 mm Patented, fully automatic adjustment on the workpiece, simply by squeezing the pliers handles, one-handed operation for right and left-handed users. Joint with fine adjustment ensures an ergonomically favourable

Equipped with tools for photovoltaics without crimping dies–for individual assignment–please order separately. With fitting tool (Allen wrench) for replacing crimping dies. Included in delivery: • Precision stripping pliers 12 12 11 • Cable shears 95 1

head polished, handles with multi-component grips

Cable jacket knife, VDE-tested up to 1000 V. Insulated blade backs, with protective cap and sliding shoe on blade tip, as a result, there is no damage to the inner conductor insulation. Length: 180 mm

Knipex crimping die For KN 97 43. For wire end ferrules 35-50 mm².

For stripping UTP and STP data cables 4.5 to 10.0 mm in diameter Stripping device for cross-sections of 0.2/0.3/0.8/1.5/2.5/4 mm² Two-level, hinged stripping tool With opening spring and locking pawl Mounting clip for secure storage Housing: Plastic,

For Knipex Crimp System Pliers For heat shrinkeable sleeve connectors.

Mini pliers wrench, pliers and wrench 86 03 150 KNIPEX Cobra®, high-tech water pump pliers 87 01 125 Tool bag made from durable polyester fabric, with rip-tape fastener and belt loop Dimensions (W x H x D): 70 x 170 x 50 mm

87 09 300 V01 Protective jaws 87 xx 300 (3 pairs)

For hard wire cables, also suitable for cabling and round steel • Precise, effortless screwed joint • With safety catch Special blade geometry prevents the wire cable fanning out Chrome vanadium high-performance steel, oil-hardened and tempered

Application: non-insulated, open plug connectors (2.8 + 4.8 mm plug width) Capacity 0.1 - 2.5 mm² AWG 27 - 13 Number of nests 4

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

Pliers and spanner forged in one tool, rough chrome-plated surface, 100 mm Replaces a set of spanners, both metric and imperial. High gripping capacity at a total tool length of only 100 mm. The parallel jaw opening grips over a continuous range of spanne

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 160 mm Polished head Stripping values: 0.5 to 5 mm diameter.

Assortment box with insulated ferrules: 0.50 - 2.50 mm² 500x 0.50 mm² 500x 0.75 mm² 400x 1.00 mm² 300x 1.50 mm² 200x 2.50 mm² length: 5.8 mm

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

Electronics side cutters for precision work on electronic components. Box, play-free precision joint, low-friction double spring, mirror-finish surface. Length 115 mm, tip Head shape, small bevel. Cutting force: Soft wire from 0.3 to 1.3 mm in diameter Ha

straight pattern knurled gripping surfaces

Needle-Nose Combination Pliers handy use when working in confined areas thanks to slim head design and pointed jaws (anti-twist) Gripping surfaces with special convex contour on one side for secure gripping of flat parts milled groove in the gripping area

Your tool, your colour: Mark tools individually with the KNIPEX ColorCode Clip: mixed colours (10x)

tool burnished, handles with multi-component grips Style 2: internal opening spring, protected and captive

Power side cutters offer 20% force saving compared with conventional side cutters of the same length. With forged pivot axis • For maximum, continuous stresses • High cutting performance with little effort due to optimal coordination of cutting angle and

Universal Grip Pliers hold round, profile and flat material securely heavy duty model with adjustment screw and release lever one-hand operation high clamping pressure due to toggle lever action pliers body: rolled steel, high-strength gripping jaws: chro

non-reflective matt finished gripping surfaces matt finished for optimum grip Chrome nickel steel: stainless, anti-magnetic (18/10), very popular electronics quality

Roll-up bag with 8 compartments made of durable polyester fabric. With practical, adjustable quick release fastener. Dimensions, opened (L x H): 610 x 240 mm.

pliers chrome plated, handles with multi-component grips

KNIPEX power side cutters 200 mm Produced from oil-hardened chrome-vanadium electric steel with forged pivot axis for the toughest stresses. Inductively hardened precision cutting edges are suitable for piano wire as well as for soft wire. New 2-component

Knipex crimping die For KN 97 43. For coax connectors RG174/58.

Automatic stripping pliers that automatically adapt to various insulation thicknesses. Including length stop and wire cutter for copper and aluminium conductors. Single-wore 6 mm², multi-wire 10 mm²

Adjustment by pushing a button directly on the workpiece. Fine adjustment: for optimum adaptation to different workpiece sizes and hand-friendly handle positions. Self-locking on pipes and nuts: no slipping on the work piece, energy-saving work. Gripping

straight pattern gripping surfaces with fine transverse serration

Knipex crimping die For KN 97 43. Crimping die for solar plug connector Solarlock (Tyco) 2.5/4.0/6.0 mm2 AWG 13/11/10

Replacement Blades for 90 22 10 BK

head mirror polished, handles with multi-component grips, pointed head

For Knipex Crimp System Pliers For twin end sleeves (ferrules) for two flexible conductors.

Electronics side cutters, Super-Knips For precision work on electronic parts. Play-free joint, extremely effortless motion, precision-milled cutting edges without grinding with opening spring and limiter. Length 125 mm, without bevel Cutting force: Soft w

insulated and non-insulated end sleeves (ferrules)

pliers chrome plated, handles with multi-component grips