Miscellaneous - Knipex, Sensor (856)

Knipex crimping lever pliers for modular jack For cutting and stripping flat telephone cable and crimping 4, 6 and 8-pin modular plugs, RJ11/RJ12/RJ45. Precise crimping action owing to parallel crimping and lock, energy-saving lever mechanism with length

high loadable, elastic precision points half-round, long jaws knurled gripping surfaces with cutting edges for medium hard wire max. dia. 3.2 mm and hard wire max. dia. 2.2 mm cutting edges additionally induction hardened, cutting edge hardness approx.

Knipex wire end ferrules assortment with pliers. In TANOS MINI-systainer® with wire end ferrule pliers 97 71 180. Fitted with wire end ferrules with plastic collars. Contents: Per 200 pieces 0.5/0.75/1.5/2.5 mm² Per 150 pieces 4.0/6.0 mm² Per 50 pieces 10

Pipe wrench by Knipex - slim, S-type jaw. jaws with offset teeth in opposite direction teeth additionally induction hardened three-point contact on pipes, self-locking I-beam handle design captive adjusting nut red powder coated, jaws bright ground

Chrome / nickel steel: stainless, anti-magnetic (18/10), very common electronic quality. ESD coating: glare-free black, with a surface resistance of approx. 10^5 Ohm tips brushed glare-free Gripping surfaces matted for optimal grip Chrome-nickel steel

Fully open, push, grab! additional fast adjustment on the workpiece by sliding the pliers handle combines the proven, reliable locking of the hinge bolt with an additional push function which makes it easier to work in very confined and inaccessible are

Contains common Precision Circlip Pliers for highest requirements. sturdy plastic packaging also suitable for storage of the pliers 4 parts

Knipex crimping die For KN 97 43. For wire end ferrules 10/16/25 mm².

Pliers wrench 250 mm, up to SW46 mm Pliers and wrench in one tool with parallel-guided gripping jaws, quick adjustment by pushing a button directly on the workpiece. Ideal for gripping, holding, pressing and bending workpieces. Infinitely variable grippin

KNIPEX universal stripping pliers, 0.03 - 10 mm² Self-adapting universal wire strippers The cutting edges of the jaws hold the stripped conductor reliably, so that slippage is prevented. The pair of stripper knives cut the correct cutting depth without ma

For oil-resistant, halogen-free control and sensor / actuator cables with multicore cable design. Shielded and unshielded. Suitable for highly flexible TPE-U-pipes, PUR and PVC cable sheathing, rubber leads such as H05 etc. Adjusts automatically to the di

Electronics side cutters, Super-Knips Produced from INOX stainless steel with precision Milled non-bevelled cutting edges for co-extensive cutting. With wire clamp. Extremely effortless motion, with opening spring. Length: 125 mm Cutting force: 0.2 to 1.

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

Protects against contact with a stripped live conductor (max. Ø 10 mm) solid plastic

pliers grey atramentized, head polished, handles with slim multi-component grips

With gripping zones for flat and round material, suitable for versatile use. with cutting edges for soft and hard wire long cutting edges for thicker cables cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC special too

Can be opened both sides. Made from tough polyester fabric, with zip fasteners and hook and loop fastener. tool loops inside plastic base tray steel handle with softgrip shoulder strap (can also be used as tool belt) with small pouch for the mobile 20

Roll-up bag with 4 compartments made of durable polyester fabric. With practical, adjustable quick release fastener. Dimensions, opened (L x H): 315 x 275 mm.

Adjustment by pushing a button directly on the workpiece. Fine adjustment: for optimum adaptation to different workpiece sizes and hand-friendly handle positions. Self-locking on pipes and nuts: no slipping on the work piece, energy-saving work. Gripping

for SMD-technology* angled tips smooth gripping surfaces

ESD cutting tweezers, particularly sharp and hard: ideal for copper, gold, silver and magnetic wire and are also available in ESD variants. Design: matt Tip width (B): 10 mm Tweezer tip style: cutting Corrosion resistant: yes Medical industry: yes Science

For heaviest duty - specially favoured by craftsmen for their precise workmanship. extreme wear resistance and well balanced cutting edges additionally hardened- cutting edge hardness approx. 60 HRC special tool steel, forged, oil-hardened

with gripping zones for flat and round material, suitable for versatile use with cutting edges for soft and hard wire long cutting edges for thicker cables cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC Special too

KNIPEX screw pliers The new KNIPEX screw pliers combine comfortable adjustment on the workpiece at the push of a button with the functionality of a universal screwing tool. Play-free gripping of the jaws reduces slipping from the screw fitting and bluntin

Knipex crimping die For KN 97 43. For non-insulated plug connectors 0.5 - 6/4.8/6.3 mm².

Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force. handle design prevents rolling chrome vanadium molybdenum steel

Multi-function key for actuation of closures in the areas of building technology (heating and sanitary facilities, air-conditioning and ventilation equipment, electrical engineering), gas and water supply and shut-off systems. • 8-beam version: 2x 4-way w

Adjustment by pushing a button directly on the workpiece. Fine adjustment: for optimum adaptation to different workpiece sizes and hand-friendly handle positions. Self-locking on pipes and nuts: no slipping on the work piece, energy-saving work. Gripping

90 10 165 E02 Spare blade for 90 10 165 BK (10x)

This self-adhesive sleeve protects against contact with a stripped live conductor. Inner diameter: 45 mm

Spring steel, high-strength

pliers grey atramentized, head polished, handles with multi-component grips, with integrated tether attachment point for a tool tether

Revolver punch pliers with opening spring and lock, as well as 6 removable blow holes (dia.2.0/2.5/3.0/3.5/4.0/5.0 mm) For punching holes in leather, textile and plastic material.

High bending strength of the pliers tips. gripping surfaces cross-hatched, knurled vanadium electric steel- forged, oil-hardened

Adapter strap Read all warnings and instructions on the product and its packaging carefully before use Not PPE (personal protective equipment): Not suitable for personal safety! Only for the attachment of tools from the KNIPEX Tethered Tools range, comb

Tool set by Knipex, contains VDE screwdrivers. Contents: 98 20 30 - screwdriver for slotted screws, 3,0 mm 98 20 40 SL - screwdriver (Slim) for slotted screws, 4,0 mm 98 20 55 SL - screwdriver (Slim) for slotted screws, 5,5 mm 98 20 65 SL - screwdriver

Pliers grey atramentised, polished head, non-slip plastic-coated handles • Full opening, sliding, gripping • Additional fast adjustment on the workpiece by sliding • Combines the proven, reliable locking of the hinge bolt with an additional push function

End angle cutting pliers For precision work on electronic parts. Box joint, play-free box precision joint, low-friction double spring, mirror-finish surface. Length 120 mm, short head, angled 35°, small bevel. Cutting force: Up to 0.6 mm in diameter.

Cuts bolts, nails, rivets, etc. up to 5.2 mm dia. Most efficient joint design ensures exceptional cutting performance. precision cutting edges for soft and hard wire as well as piano wire cutting edges additionally induction hardened, cutting edge hardne

For fine mounting work. straight pattern smooth gripping surfaces particularly slim tips non-reflective matt finish chrome nickel steel: stainless, anti-magnetic (18/10), very popular electronics quality gripping surfaces matt finished for optimum gr