Miscellaneous - Logic, Proxxon, Romagna Plastic, Sensor (139)

The NF-A4x20 is a highly optimised, quiet 40x20-mm fan in premium quality that uses forward-looking aerodynamic design measures such as Flow Acceleration Channels and Noctua's AAO frame system. The FLX version offers 3 speed settings (5000/4400/3700 rpm)

Elastic silicone polishers in bullet shape. For polishing and smoothing surfaces. For precious metals, non-ferrous metals, stainless steel, glass, porcelain, wood, rubber and plastic. Set of 5

With fabric insert. 50 x 1 x 10 mm. For cutting steel, non-ferrous metal, plastic and wood. Diameter: 50 mm.

The NF-A12x25 is a highly optimised, next-generation fan measuring 120 mm. The fan raises the bar for silent cooling performance thanks to the innovative, aerodynamic engineering. It combines pioneering Noctua technologies such as the AAO (Advanced Acoust

Vibrant ARGB function We have built in 16 ARGB LEDs to ensure a seamless lighting effect. With the ARGB function, this Iceberg Thermal fan gives your PC a magical element that allows you to synchronise your ARGB lighting effects directly with your mother

High-quality steel brush for high removal rate. 2 pieces, brush shape

Ideal for grinding, deburring, scharpening, rust removal and roughing of steel and non-ferrous metal.

Rigid brass housing + fluid dynamic bearing = PERFECT This IceGALE® fan has a sturdy brass housing, making it a reliable product, and a fluid dynamic bearing that reduces the noise level and thus ensures quiet operation. Automatic START/STOP function Cr

So quiet that you won't notice it Never fear, because the IceGALE® Silent runs at a virtually silent 12.3 dBA, making it quieter than a whisper. Innovative new fan design Iceberg Thermal has developed a new fan design, adding improvements from the blade

It turns the PD 230/E and PD 250/E lathes into a complete machining center. Incl. column (35x 400mm), mounting flange and fixing screws. Scope of delivery: Drilling and milling device WITHOUT lathe.

Tool holder for cylindrical grinding on lathes Made of steel with 20 mm MICROMOT system fit. For precise clamping of IBS/E or LBS/E drill grinders in the steel holder of the lathe. Stem size 8 x 10 mm. Total length: 65 mm.

Made from HSS steel. DIN 333 (type A). 60°. Complete set of centre drills in sizes 2 mm, 2.5 mm and 3.15 mm.

For precision drilling, milling, sanding, polishing, brushing, derusting, engraving, chiselling and cutting. With drill chuck (clamping range 0.3 - 3.2 mm). Precision ball-bearing spindle made of ground steel that can be locked at the push of a button for

PROXXON super-fine grinding discs made of silicon carbide are ideal for the pre-grinding and finishing of fillers and paint and for removing paint drips and entrapped particles.

Rasp cutter with metal needles made of tungsten-carbide For woodworking: application tools with metal needles made of tungsten-carbide. Unbeatable for modelling, cleaning and smoothing wood and fibreglass. Not for metal! Extremely sharp and easy to operat

Diamond grinding pins ball 1mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter 2.35.

Brass brushes, 5 pieces, in a wheel shape and 1 shaft, suitable for machining brass, copper, semi-precious stones, plastic and wood, as well as for cleaning electronic components and circuit boards.

Flap wheels made of standard corundum The flap wheels are elastic and adapt to the contours of the workpiece to be processed. For machining hard to reach places. Flap wheel diameter 20mm (Shaft diameter 3.0mm)

High-quality steel brush for high removal rate. 5 pieces, wheel shape and 1 shaft.

Rigid brass housing + fluid dynamic bearing = PERFECT This IceGALE® fan has a sturdy brass housing, making it a reliable product, and a fluid dynamic bearing that reduces the noise level and thus ensures quiet operation. Automatic START/STOP function Cr

The 11-mm orbital motion of the polishing disc enables hologram-free polishing of painted and bare surfaces without heat building up. Powerful, balanced DC special motor with stepless speed control (full-wave electronics). Smooth-running planetary gear in

Electronically controlled temperature with short heating time. Extra-high battery capacity for long operating life. For convenient, mains-independent soldering. Electronically controlled temperature (470°C) with short heating time. Extra-high battery capa

Wolfram vanadium steel milling bits, for machining soft and hard wood, non-ferrous precious metals, as well as plastics and plaster.

For clamping asymmetrically shaped wood. Clamping range with reversing jaws from 1.5 - 35 mm inside and from 14 - 67 mm outside. Easy to secure with M16 x 1 internal thread suitable for the main spindle of the DB 250.

Felt polishing wheel (100 x 15 mm) For polishing smooth surfaces on metals (e.g. gold, silver, brass and aluminium) to a high-gloss finish. Retains its shape and has a long service life. Uniform polishing pattern. For use with all polishing pastes.

PROXXON super-fine grinding discs made of silicon carbide are ideal for the pre-grinding and finishing of fillers and paint and for removing paint drips and entrapped particles.

Rigid brass housing + fluid dynamic bearing = PERFECT This IceGALE® fan has a sturdy brass housing, making it a reliable product, and a fluid dynamic bearing that reduces the noise level and thus ensures quiet operation. Automatic START/STOP function Cr

PROXXON diamond-coated cutting and profiling disc for LHW and LHW/A. For cutting, grinding and profiling very hard materials such as glass, porcelain and tiles. Low heat development thanks to a cooling hole.

The precise vertical milling machine for the finest work. Spindle speeds 5000 - 20,000 rpm. For working with extremely small cutters. Stable machine base made of cast iron, vertical guide and cross table. With play-free, readjustable dovetail guide in all

Soft fabric polishing buffers (100 x 15 mm) For polishing gold, silver, platinum, copper, brass, stainless steel and plastic to a high-gloss finish. Adapts to the contours of the workpiece. Use only with polishing paste or emulsion.

Ideal for grinding, deburring, sharpening, rust removal and roughing of stone, glass, ceramics and other very hard materials. 60 Grit.

Super Cut circular saw blade Saw blade for precision-cut table saw FKS/E 80 teeth for hard wood, soft wood and plastic. Dimensions: 85 x 0.5 x 10 mm

The NF-A20 has received numerous awards and recommendations from international hardware websites and magazines and has established itself as a benchmark for 200-mm premium quality fans. In the chromax.black.swap edition, the unique silent cooling capacity

Brushless direct drive: quiet, vibration-free operation with high precision. Made in Germany. Infinitely variable speed preselection from 400 to 6000 rpm. Digital speed display. Drill head can be swivelled though 360° (indicated on a scale). With 230-V di

For drilling, milling, grinding, polishing, cleaning, cutting, engraving and signing. For precision mechanics, model builders, jewellers, opticians, artists and craftsmen, and electronics engineers. • Ball bearing spindle made of ground steel. With lock b

High-quality steel brush for high removal rate. 2 pieces, cup shape

Diamond grinding pins ball 1.8mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter 2.35

Rasp cutter with metal needles made of tungsten-carbide For woodworking: application tools with metal needles made of tungsten-carbide. Unbeatable for modelling, cleaning and smoothing wood and fibreglass. Not for metal! Extremely sharp and easy to operat

10-piece polishing set for polishing metal, glass, precious metal, porcelain and plastic.

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic