Miscellaneous - Logitech, Proxxon, Romagna Plastic, Sensor (121)

For drilling, milling, grinding, polishing, cleaning, carving and engraving. Maximum speed: 20,000/min 230V / 100W Class 2 protective insulation.

Cutting saw blades - spring steel assortment, 1 piece each. Sizes: 16, 19, 22mm Thickness 0.1mm

Rasp cutter with metal needles made of tungsten-carbide For woodworking: application tools with metal needles made of tungsten-carbide. Unbeatable for modelling, cleaning and smoothing wood and fibreglass. Not for metal! Extremely sharp and easy to operat

PROXXON abrasive mop roller for WAS/E and WAS/A roller grinders. For cleaning, grinding and removal of flat surfaces. Grinding compartments made of normal corundum are elastic and adapt to the contours of the workpiece being machined. For finishing work i

For super-precise circular cuts! Allows accurate production of cylinders and cut-off cones with high repeat accuracy. Solid aluminium construction (anodised). Stepless, tool-free height adjustment. Generous feed gear ratio (1: 3) for convenient cutting wi

With stepless speed preselection for 200 - 4000 rpm with high precision (accuracy 0.05 mm). With digital speed display. Sophisticated control via rotor-position and speed sensors guarantees high torque when using large cutters, even in the lower speed ran

For architecture model construction, designers, decorators, artists (including arts and crafts lessons), prototype building. And for classic modelling (rail, flight, ship). Stable body with a 390 x 280 mm work surface made of aluminium-cobond compound. Wi

Clamping up to 5 mm. Used in place of the rotating centring tip. Feed is achieved by moving the entire tailstock.

Drilling and milling unit Micromot 60/E for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing. Voltage supply: 12 V by Proxxon power supply unit 28704/28706 Idle speed: adjustable fro

Tungsten-vanadium steel twist drill. Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

Drilling and milling unit Micromot 60 for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing. Voltage supply: 12 V Idle speed: 20,000 rpm Extremely easy to manage with a diameter of on

Micromot steel collets for all hand-held Micromot devices. 1 piece each for 1.0/1.5/2.0/2.4/3.0/3.2mm with clamping nut and collet holder.

Corundum cutting discs, manufactured with a special binder. 50 discs, diameter 22mm

Flap wheels made of standard corundum The flap wheels are elastic and adapt to the contours of the workpiece to be processed. For machining hard to reach places. Flap wheel diameter 30mm (Shaft diameter 3.0mm)

For drilling, milling, grinding, polishing, cleaning, carving and engraving. The extremely slim housing (made from glass-fibre-reinforced polyamide) with a soft component in the grip area allows the device to be guided with two fingers (pen grip). With a

Diamond grinding pins, cylinder 1.8mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter

Extend the talk range from 6 m (20 ft) to 8.5 m (28 ft) to clearly hear people further away from the hands-free device. Microphones (in pairs) are automatically detected and configured by simply connecting them to the hands-free device.

The Logitech® Gamepad F310 — control your PC games like you would with a console. Console-style controller for PC games • Unique compatibility • Profiler (software) • Familiar button layout • Freely movable D-pad • 1.8-m cable From sports games to shooter

MICROMOT 60/EF with power supply unit and 43 industrial-grade tools With quick-release chuck. Convenient when working with different shaft diameters. Balanced DC motor. Quiet and extremely durable. Ground ball-bearing spindle. Electronic speed control fro

For cutting, roughing, grinding, fine sanding and shaping in wood. Balanced DC special motor, powerful, quiet and durable. Stable gear head made of die-cast aluminium. Main housing made of glass fibre reinforced POLYAMIDE. Complete with grinding wheel mad

M 3 - 4 - 5 - 6 - 8 and 10. With clamping pin Ø 10 mm for mounting in the tailstock drill chuck of the lathe. When thread cutting, the holder is held by hand. Completely packed in a wooden case with sliding lid. Accessories for lathes

HSS spiral drill set consisting of 1 piece in each size: 0.3/0.5/0.8/1.0/1.2/1.5/2.0/2.5/3.0/3.2mm. For drilling non-ferrous metal, steel and stainless steel.

PROXXON professional grinding and polishing set for fine grinding and polishing. For repairs and work in confined areas, such as on motorcycles, rims and passenger car interiors and engine compartments. With an 80 mm extension for low-lying trouble spots.

PROXXON diamond-coated cutting disc for LHW and LHW/A. For making very thin cuts in hard materials such as glass, porcelain and tiles. Low heat development thanks to a cooling hole.

MICROFLAME burner MFB/E - For soldering, unsoldering, brazing, heating, baking and tinning. Independently adjustable gas and air supply for consistent, fine flame shapes and temperatures up to 1300 °C. It is therefore suitable for micro precision work. El

Tungsten-vanadium steel twist drill. Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

MICRO Heat Gun MH 550 Small, robust and powerful. Complete with three additional nozzles. For shrinking hoses, shaping and welding plastic, and soldering and desoldering electronic components. For removing paint and varnish layers without strong chemical

Tungsten-vanadium steel twist drill. Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

With multiple ball-bearing transmission in a strong, die-cast aluminium housing head. • Also suitable for right-angle cutting of rods. • Special balanced, powerful, quiet and long-lasting DC motor. • Infinitely adjustable speed regulator (full wave elec

Diamond-coated cutting disc for porcelain, glass fibre panels and non-ferrous metals. Diameter: 20 mm Thickness: 0.6 mm

Slim, compact Bluetooth® mouse with customisable button. Three Easy-Switch Bluetooth channels How you express yourself is your business. Show your true colours. Anything but monotonous. BOREDOM GONE! Bring colour into your everyday with the Pebble Mouse

The PROXXON Li-ion battery makes long and high-power working possible. The integrated temperature monitoring feature ensures safe use. One battery charge lasts for at least 30 minutes, even when it is used at a high-power setting.

Microfibre polishing buffers, 15-ply (100 mm) Very soft. For polishing precious metals, non-precious metals and plastic to a glossy finish. Particularly suited for use in difficult-to-access places that cannot be reached with fixed discs. Use only with po

Jigsaw blade made of special steel Ground and set toothing (pitch 1.5 mm). For cutting all types of wood, fibreglass panels and soft plastics. For SS 230/E and STS 12/E.

PROXXON abrasive mop roller for WAS/E and WAS/A roller grinders. For cleaning, grinding and removal of flat surfaces. Grinding compartments made of normal corundum are elastic and adapt to the contours of the workpiece being machined. For finishing work i

3-jaw lathe chuck, centric clamping Identical to that of the PD 250/E lathe. High-quality clamping device according to DIN 8386, class 1 (concentricity tolerance 0.04 mm). Clamping range by exchange jaws from 2 to 75 mm. Suitable for PD 250/E and divider

Reliable filtering of dust, chips, fumes and smoke as well as pollen, bacteria, viruses, spores and odours. Non-woven pre-filter for the separation of coarse particles. High-quality main filter according to class HEPA 13. Easy filter change. Technical dat

Pre-filter For the separation of coarse particles. 2 pieces.

Precision lathe PD 250/E For facing, longitudinal and taper turning, thread cutting. For machining steel, brass, aluminum and plastic. Mounting flange for attaching the PF 230 drilling and milling unit. Center width 250 mm. Center height 70 mm. Center hei

Main filter kit Consisting of main filter according to class HEPA 13 with filtration efficiency > 99.95% and activated carbon filter. One unit each.