Miscellaneous - MM Spray, Romagna Plastic (1,324)

9413 Textile Box Kraftform Compact VDE 17 extra slim 1, empty, 240 x 148 x 47 mm

The ADVANCEDLINE twist step drill with innovative step technology enables fast and precise drilling with minimal effort, it is multifunctional and thanks to the 3-surface shank it is also perfectly suitable for hand-guided battery drills. Advantages Signi

R2 plus chipboard screw, pan head, 5.0 x 20 mm, full thread, TX 25, steel, galvanised, blue passivated, 200 pcs. Description R2 plus chipboard screw - for universal application in interior design, furniture construction, timber construction PRODUCT FEATU

3/8'' hexagon socket bit, HX 4 mm, 50-mm long Head made of chromium-silicon-manganese-molybdenum steel. Socket made of CrV steel.

ERSADUR-LF soldering tip for the i-TOOL. • Chisel-shaped • 1.6 mm

SDS-plus chisel Forged from one piece: Stable and resharpenable, long service life. With SDS-plus shank. Working length: pointed 14 mm Total length: 250 mm

EBP-Earth Bonding Point, EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). Earthing point for mounting underneath the table top. EBP / Earth Bonding Point = A common connection point to which ESD control e

Glass fiber eraser / rust eraser as a handy and practical helper for corrections or etchings. Content: 10x spare refill Glass fiber bristles Bristle length 35 mm Brush Ø 4 mm

9.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

ERSADUR soldering tip for i-CON TRACE soldering station

1.2-mm carbide drill bits in ten-piece plastic box. Precisely manufactured drill bits with a high level of rotational accuracy and strength. Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.

ALPS compact, logarithmic, 9.8-mm rotary potentiometer in PCB assembly/snap-in design Horizontal installation Resistance: 10 kOhm Housing: dustproof seal Metal shaft (Ø x L): 6 x 12.5 mm (flattened) Incl. M9 x 0.75 nut and washer Nominal voltage: 50 VAC R

Chisel shape 480°C, 4.6 mm for TCPS, TCP 12, TCP 24, TCP 42 and FE 50M soldering iron width A: 4.6 mm , width B: 0.8 mm the Magnastat system works by means of a permanent magnet and a ferro-magnetic temperature sensor. If the soldering tip is cold, the pe

Solder wire HS10 FAIR - Fair, ecological, reliable! The soldering wire HS10 is a product that has been tried and tested for many years and has been developed for high quality requirements in industrial production as well as for fast repair and re-solderin

Lamellar flap grinding disc by RHODIUS. Through the opening in this lamellar flap grinding disc you can always see what and where you are cutting – while keeping grinding amazingly cool and maintaining an even surface pattern. Suitable for processing thin

For all work on electrostatically sensitive components. The blades are made of quality steel to ensure torsion resistance - at maximum stress. The tips are burnished for dimensional stability and to prevent chrome chipping (except socket wrench). The rota

Fibreglass fabrics are becoming increasingly popular due to their enormous versatility and countless possible applications. The advantages are high strength and resistance to chemicals and other environmental influences at a realistically low price. Due t

Tool compatibility: For use with the WXUPS MS smart soldering irons and the Wxsmart soldering station Perfect for all ultra soldering applications which require a lot of heat Thermal Core Technology delivers maximum power to the tip, 150 W provides maximu

Replacement soldering tip • 0.4 mm • Pencil tip For example, for soldering iron 107 ESD / station 988D, station AT80D, station LF-1600, RND 560-00155, etc. with inner-heated tip. Tip Ø with heat element on outside 6.55 mm Tip Ø with heat element on inside

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 3.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 2 pieces

''These breadboard boards are ideal for designing your own circuits. Since the soldering contacts on the front and back are accessible, components can be soldered on both sides. The contacts already coated with tin and plated through make soldering easier

LT GW soldering tip Soldering tip, cavetto, loose Width A: 2.3 mm Thickness B: 3.2 mm Length L: 18.8 mm Corresponding soldering family FE MPR WP WSP Replacement soldering tip for WSP 80 (WSD 81).

Reisser R2 — flat countersunk head, PZD Phillips, Pozidriv Hardened steel, blue zinc plated, sliding surface, RN 9200 VG, full thread Thread: 3.5 mm Length: 35 mm Content: 200

HAZET stainless steel extension 9040-41, length: 187 mm Application: For loosening low-seated, seized ignition coil plugs in conjunction with 2-way blow gun 9040-4 and cone set 9040-42/3. Connection thread (female and male) 1/8'' PF 28. Dimensions/length:

Lowers your costs: Bit quick and easy to find thanks to yellow marking - even in dark environments by using an UV light. Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan. Increases your efficiency:

Miniature coupler, 2 mm diameter , insulated, contact spring made of copper beryllium, nickel-plated with soldered connection. Flexible, non-crush insulating sleeve. For assembling connection cables with max. 2 mm outside diameter. • Socket Ø 2 mm, spring

9414 textile box Kraftform Kompakt W 100, empty, 140 x 88 x 47 mm

HSS super steel drill bit set 19-piece in plastic case. In gradations of 0.5 mm. Drill bit set in specially hardened HSS quality with a particularly well-reinforced core.

Dosing needle for Luer-Lock (TM) - holder.

When you need a reliable, accurate spirit level, it's best to choose a tool that has been proven by professionals. smooth aluminum rectangular profile coated measuring surface is gentle on sensitive surfaces easy to clean thanks to smooth side surfaces

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 11.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

Powerful and robust lever cutter ideal for frequent and extensive use in the office for cutting paper, labels, films, photos, laminating films, cardboard and mounting board. For up to 25 sheets of A4 paper (80 g/m²) Safety blade made from high-quality st

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 9.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

R2 plus chipboard screw, pan head, 4.5 x 50 mm, partial thread (L1), TX 25, steel, galvanised, blue passivated, EN 14592: 2008+A1: 2012, 200 pcs. Description R2 plus chipboard screw - for universal application in interior design, furniture construction,

Tool compatibility: For use with the WXMPS MS smart soldering irons and the WXsmart soldering station Perfect for all Pico applications with the smallest component sizes Smart, high-performance tips for working on the smallest components under the micros

Lowers your costs: Bit quick and easy to find thanks to red marking - even in dark environments by using an UV light. Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan. Increases your efficiency: Th

The problem solver for the workshop. The micro-speeder! The new ring ratchet spanners are second to none when it gets tight! Dimensions: 14 mm x 15mm

Pack of five jigsaw blades for wood, HCS Bayonet (T) shank Ref. no. T234X Serrated length: 91 mm Tooth pitch: 2.5 mm Conically ground, diagonally sharpened Example application: Clean, fast cuts Hardwood, softwood, coated panels, plastics, epoxy > 30 mm

Tool compatibility: For use with the WXMPS MS smart soldering irons and the WXsmart soldering station Perfect for all Pico applications with the smallest component sizes Smart, high-performance tips for working on the smallest components under the micros

Colour: transparent H x W x D: 47 x 79 x 109 To partition drawer 250-3, PSC 4-01, compact case and Carry-Lite 55 Made of polypropylene (PP).