Miscellaneous - MS-Tech, Romagna Plastic, Sensor, V-Tac (68)

Convient comme lampe d'affichage et de signalisation pour le modélisme, par exemple les locomotives, les maisons, les lampadaires, l'éclairage des crèches, ainsi que pour les lumières de Noël et les guirlandes lumineuses

LED lamp with decorative spiral filament.

Flat LED, round special form, 3 mm, green. Manufacturer no.: L-424GDT

LED work light, 60 W, (20x3 W), approx. 5400 lumens, aluminium and glass polycarbonate housing Technical details: Lamp: 20 x high power LEDs at 3 W Voltage: 10 - 30 VDC Light intensity: approx. 5400 lumens, light colour 6000k Dimensions (WxHxD): approx. 9

LED working floodlight, 120 W, (40x3 W), approx. 7800 lumens, Housing aluminium, glass polycarbonate, Technical details: illuminant: 40 x high power LED at 3 W Voltage: 10 - 30 VDC Light intensity: approx. 7800 lumens Light colour: 6000 K Protection class

• C-2R filament • Miniature lamp / micro incandescent lamp for versatile use, e.g. switches, buttons, etc.

RAFI indicators • With integral bulb • 10 mm • Arrow-shaped bezel • 24 - 28 V

• Small lamp • C-2R indicator and signal lamp

LED tube from the V-TAC Professional Line - to meet the very highest demands. Rotating version They feature a plastic housing, making them less breakable than glass tubes. A starter is included with the tubes. This replaces the existing starter. Install t

Filament bulb, 24 V / 5 W Bulb • 24 V / 5 W • 42 mm For the following part numbers: WERMA 200 xxx xx WERMA 203 xxx xx WERMA 641 xxx xx WERMA 815 xxx xx

LED tube from the V-TAC Professional Line - to meet the very highest demands. Highly efficient at 160 lm/W They feature a plastic enclosure, making them less breakable than glass tubes. A starter is included with the tubes. This replaces the existing star

High-quality, 500 watt server power supply with up to 92% efficiency.

LED work light, 420 W, (140 x 3 W), approx. 42,000 lumens, aluminium and glass polycarbonate enclosure Technical details: Lamp: 140 x high power LEDs at 3 W Voltage: 10 - 30 VDC Light intensity: approx. 42,000 lumens, light colour 6000k Dimensions (WxHxD)

LED work light, 5 x 3 W, approx. 900 lumens, aluminium and glass polycarbonate housing, Technical details: Lamp: 5 x high power LED, power: 15 W (5 x 3 W) Voltage: 9 - 32 V, light intensity: approx. 900 lumens Protection class: IP67 Dimensions (W x H x D)

Sub-miniature bulb T1 Voltage: 18 V Current: 26 mA Output: 0.47 W Pin socket spacing: 2.54 mm Dimensions (ØxL): 3.17 x 9.5 mm Type: indicator lamp

WERMA red LED flashing light 24 V AC/DC Optical signal element • Clear signalling even in low light conditions • Service life: 50,000 h • Flash frequency approx. 1 Hz For the WERMA modular system, you need the following elements: • Signal element(s) • Con

Filament bulb, 230 V / 5 W Bulb • 230 V / 5 W • 42 mm For the following part numbers: WERMA 200 xxx xx WERMA 203 xxx xx WERMA 641 xxx xx WERMA 815 xxx xx

RAFI indicators • With integral bulb • 10 mm • Square bezel • 24 - 28 V

• Small lamp • C-2R indicator and signal lamp

RAFI indicators • With integral bulb • 10 mm • Arrow-shaped bezel • 24 - 28 V

The DFG12038B12DN is a 120 mm fan with a high static air pressure of 31.10 mmH2O and an airflow rate of 332.50 cbm/h at 5500 rpm. It is the ideal candidate for use in systems where a lot of heat is generated during operation, such as when a large number o

5 mm LED indicator in a bright chrome fitting with an external reflector. Colour: red Installation diam.: 8 mm IP67, 12 volt, 4.5 mcd With series resistor for direct connection to the supply voltage. Connection via 2.0/2.8 mm Faston contact or careful sol

3 mm LED indicator in a bright chrome fitting with an external reflector. Colour: white Installation diam.: 6 mm IP40, 24 volt With series resistor for direct connection to the supply voltage. Connection via 2.0/2.8 mm Faston contact or careful soldering.

3 mm LED indicator in a bright chrome fitting with an external reflector. Colour: blue Installation diam.: 6 mm IP40, 24 volt With series resistor for direct connection to the supply voltage. Connection via 2.0/2.8 mm Faston contact or careful soldering.

Red neon bulb With built-in resistor, 230 V

LED Ba15d R37 x 42 12 V 240 lm 5 W 927 35° AC/DC Silver Dim

Multi-Look® LED lamp for BA9s base Multi-Look® LED lamp with single chip. By sealing the chip LED, both an increase of the beam angle and a high mechanical protection are achieved. The lamps are therefore shock and vibration resistant. Special combination

E10 G15x29 mm, 6 V, 1000 mA, 6 W, C2R, 1000 hours, clear - 10 pcs