Miscellaneous - OKI, Printer Maniak, Romagna Plastic, Trend (34)

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 5 lengths Strip width: 6 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

Waste toner container for Canon iPF TC-20

The UPO1002 series of digital phosphor oscilloscopes uses the innovative Ultra Phosphor 2.0 technology with an upgraded look and features such as deep memory, high waveform acquisition rate, real-time waveform recording and playback, and 256-point greysca

The UT622A handheld LCR meter offers powerful features, a high degree of accuracy, fast measurement speed and long standby time. With a clear and intuitive 2.8-inch TFT LCD display, a large-capacity battery and a test frequency of up to 10 kHz, this meter

The UT330TH/UT330THC USB data loggers use high-precision temperature and humidity sensors to monitor and record over a long period of time. They are ideal tools for monitoring temperature and humidity sensitive goods such as pharmaceuticals and perishable

Compatible ink ribbon for OKI ML-380/ML-390/ML-391/ML-3390/ML-3391. IMPORTANT: Not for OKI ML 390FB!

Suitable for wire cross-section 6 - 16 mm² Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 2 lengths Diameter of sheathed cable: 5.9 - 8.3 mm Method of attachment: push onto wire

The UT622E handheld LCR meter offers powerful features, a high degree of accuracy, fast measurement speed and long standby time. With a clear and intuitive 2.8-inch TFT LCD display, a large-capacity battery and a test frequency of up to 100 kHz, this devi

The probes from the UT-P00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits desc

The UPO1002 series of digital phosphor oscilloscopes uses the innovative Ultra Phosphor 2.0 technology with an upgraded look and features such as deep memory, high waveform acquisition rate, real-time waveform recording and playback, and 256-point greysca

The probes from the UT-P00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits desc

UT-Z003 is a macro lens suitable for the UNI-T thermal imaging cameras UTi730E/UTi720E/UTi730V/UTi720V. It is a perfect add-on adapter for thermal imaging cameras to detect tiny electrical components that overheat. Engineers can easily perform circuit loa

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

• Very sturdy metal/plastic frame • Load capacity: Up to 80 kg • Printer level (W x D: 68 x 50 cm) • Intermediate level (W x D: 59 x 44 cm) • Base plate (W x D: 59 x 31.5 cm) • Space between levels: 31.5 cm each • Solid feet with level screws to stop the

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

More suitable: for wire cross-sections 0.75 - 1.5 mm² Marking method: thermal transfer Label: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 3 lengths Label surface: 5 x 23 mm Diameter of sheathed cable: 2.3 - 2.8 mm Met

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 9 lengths Strip width: 3 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

Uni-Trend - sound level meter This new digital sound level meter with a high accuracy of +/- 1.5dB and a large, backlit and well-organised digital LCD display with bar graph is perfectly suited for use in all relevant areas. Use the measuring device for n

The UTD1050CL is an economical handheld digital storage oscilloscope with 50-MHz bandwidth and a sampling rate of 2000 MSa/s. It integrates an oscilloscope, a multimeter, a trend chart and a waveform recording function. The compact and portable design pro

The probes from the UT-P00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits descr

UTG1042X The UTG1000X series offers precise and stable waveform output with a resolution of just 1 µHz. It is an economical, powerful and multifunctional function/arbitrary waveform generator. Accurate, stable, clean and low-distortion output signals can

The probes from the UT-H00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits descr

Suitable for wire cross-section 2.5 - 6 mm² Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 3 lengths Label surface: 7 x 26 mm Diameter of sheathed cable: 3.3 - 4.9 mm Method of a

Universal K-type temperature sensor Measurement range: -40°C ~ 1000°C Compatible with: • UT 61 series • UT 71 series

The probes from the UT-H00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits descr

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 5 lengths Strip width: 5 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

• Sturdy metal/plastic frame • Printer level (W x D: 68 x 50 cm) • Intermediate level (W x D: 58.5 x 44 cm) • Base plate (W x D: 57.5 x 31.5 cm) • Moves on four castors, two of which are lockable • Level screws stop the printer stand tipping sideways • Ma

The probes from the UT-H00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits descr

VDV II the universal wiring tester - cloud-connected with Bluetooth and report function for important basic testing to avoid connection problems. The VDI II cable tester is easy to operate and allows the rapid verification of the copper cable of voice, d

The UTD1102C handheld oscilloscope offers ease of use, outstanding technical specifications and a wide range of advanced features. It can be operated either from an external AC power supply or from the integrated lithium battery. Its powerful trigger and

The probes from the UT-P00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits desc

This self-levelling cross line laser with green LD lasers generates 3 laser lines a 360°. Due to the green laser diodes the lines are also well visible in bright environments and larger distances. The projection is done by one horizontal and 2 vertical la

Digital, non-contact tachometer with built-in laser for fast and accurate contact-free measurements of revolutions per minute and surface speed of rotating objects. • USB-Schnittstelle inklusive Software • Two test modes: Rotation speed mode (unit: UPM)

The UT622C handheld LCR meter offers powerful features, a high degree of accuracy, fast measurement speed and long standby time. With a clear and intuitive 2.8-inch TFT LCD display, a large-capacity battery and a test frequency of up to 100 kHz, this devi