Miscellaneous - Osram, PowerPlus, Romagna Plastic (132)

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Solvent-free two-component adhesive on epoxy resin basis for highest loads. The processing time is up to 90 minutes. Curing time and final strength are temperature-dependent. At room temperature, solid after 12 hours. The bonded joint is impact-resistant,

Product benefits: Very low energy consumption. Shockproof and vibration-proof thanks to LED technology. No UV and near-IR radiation in the light beam. Instant 100 % light, no warm-up time. Can be easily fitted instead of ordinary light bulbs. Lower therma

Energy-saving and long-lasting - LED lighting from Osram. Product benefits: Very low energy consumption Very long service life Easy replacement with conventional incandescent lamps Low heat emission Product features: LED lamps for mains voltage Standa

PCE Instruments PCE-PA 5500 power meter AC voltage: 30 to 264 V AC current direct: 0.025 mA to 5 A Energy counter RS485 Modbus interface Accuracy class: 0.5 Product benefits: The power meter is a compact instrument for measuring and displaying various

TOPLED The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

Power Sensor Support for FPH handheld spectrum analyzer (unregistred software license).

OSRAM 2er-Pack Filament-LED. based on a E14-Socket opal mini bulb light current 470 lm by only 4 W nominal capacity

SMD-LED • SMD light-emitting diodes with flat head • For signalling, e.g. in display panels, pressure switches, etc. • Also suitable for 'reverse' installation

Micro SIDELED The compact chip LED is used as a backlight in a wide variety of applications such as LCDs, dashboards, phones, fax machines, switches and icons, as well as for general use.

Power TOPLED The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

SMARTLED 0603 The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

Micro SIDELED The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

Mounting shank For 68/68S/68W/80/80S/80W drill bits M16 external thread with holes for centre drill. Driven by SDS Plus shank Drill Ø 9 mm (Does not include drill bit)

Flexibility, visibility and quick access to tools, accessories and other parts with the Superclip system. It consists of a tool wall panel (steel perforated plate) and different versions of tool hooks. The clips can be mounted anywhere on the wall and mov

Highly practical silicone work mat for soldering work or repairing electronic components. Dimensions: 45 x 30 cm Anti-static Heat resistant up to 500°C Wipeable Suitable for soldering electronic components For repairing printed circuit boards etc. 14 stor

The METRAclip 87 clamp multimeter is suitable for the measurement of medium power values in the low-voltage range, and thus offers optimized safety for all types of systems and under any measuring conditions. In addition to applications in the areas of ma

Q200 Plus chipboard screw TX, partial thread Thread: 5,0 Thread: 80 mm Steel zinced, Plastic-Box

SMARTLED 0603 The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

TOPLED The compact chip LED is used as a backlight in a wide variety of applications such as LCDs, dashboards, phones, fax machines, switches and icons, as well as for general use.

the fischer Power-Fast FPF-ST P chipboard screw is a chipboard screw with a countersunk head, torx TX drive and partial thread. The countersunk head with a torx TX drive guarantees maximum power transmission with maximum bit stability for flush-mounted sc

SMD-LED • SMD LED with integrated reflector, P-LCC housing, high reliability

The METRAclip 86 clamp multimeter meets all of the expectations of operations in the electrical trades and is suitable for applications in the low-voltage range with low to medium power values, e.g. maintenance of electrical installations and machinery, t

PointLED The compact chip LED is used as a backlight in a wide variety of applications such as LCDs, dashboards, phones, fax machines, switches and icons, as well as for general use.

Loop-powered unipolar-reading process monitor with 4 - 20 mA input and red LED display. Product series: DMR20-4/20 Measuring range: 4 mA to 20 mA Display type: LED Colour: Red Number of digits: 3,5 Digit height: 7,6 mm Power supply type: Loop-powere

Water analysis made easy! With the McPower swimming pool water tester you can analyse the exact chlorine and pH values in seconds. You can then effectively influence water quality without the inaccuracy of traditional test strips. Ph value measurement Ch

MCPower universal nut, for 1/4'' to 3/4'', incl. adapter This ingenious tool replaces almost your complete tool case and adapts to almost any type of screw. Easily loosen and screw wall hooks, plug-in nuts, square-head and hexagon screws, special pins, br

SMD-LED • SMD LED with integrated reflector, P-LCC housing, high reliability

Energy-saving and long-lasting - LED lighting from Osram. Product benefits: Very low energy consumption Very long service life Easy replacement with conventional incandescent lamps Low heat emission Product features: LED lamps for mains voltage Standa

Q200 Plus chipboard screw TX, partial thread Thread: 6,0 Thread: 100 mm Steel zinced, Plastic-Box

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

Nickel plated steel construction for strength & easy cleaning. Suitable for use with electric drills at speeds between 200 - 700 rpm.

Loop-powered bipolar-reading process monitor with 4 - 20 mA input and red LED display. Product series: DMR20-4/20 Measuring range: 4 mA to 20 mA Display type: LED Colour: Red Number of digits: 3,5 Digit height: 7,6 mm Power supply type: Loop-powered

Pulse Measurements with Power Sensor for FPH handheld spectrum analyzer (unregistred software license).

Adapter plate which is connected on the bottom of a CarryMore unit and links together the unit with a power tool box.

SMARTLED 0603 The compact chip LED is used as a backlight in a wide variety of applications such as LCDs, dashboards, phones, fax machines, switches and icons, as well as for general use.

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 4.5 x 60, blue galvanised steel, 1x sliding, VE 200 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

LR P47F PointLED® Description With a diameter of just 2 mm, the PointLED is one of the smallest packages in its class and achieves high luminous efficacies. Due to its round and flat package, measuring only 0.775 mm high, it is ideal for application where

SMARTLED 0603 The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.