Miscellaneous - Proxxon, Romagna Plastic (172)

With stepless speed preselection for 200 - 4000 rpm with high precision (accuracy 0.05 mm). With digital speed display. Sophisticated control via rotor-position and speed sensors guarantees high torque when using large cutters, even in the lower speed ran

The most compact and most precise design in the world! For the finest grinding work and precise material corrections. Dust-free working: Direct extraction through the Mirka Abranet Max mesh sanding belt. Grinds longitudinal edges, front edges, curves, mit

Elektronischer Piezo-Kristallzünder. Gas- und Luftzufuhr stufenlos einstellbar. Das MICROFLAM-Gaslötset MGS von PROXXON. Zum Arbeiten mit offener Flamme oder über Katalysator mit Aufsätzen. Zum Löten, Heißschneiden, Brandmalen und Schrumpfen. Elektronisch

For architecture model construction, designers, decorators, artists (including arts and crafts lessons), prototype building. And for classic modelling (rail, flight, ship). Stable body with a 390 x 280 mm work surface made of aluminium-cobond compound. Wi

Clamping up to 5 mm. Used in place of the rotating centring tip. Feed is achieved by moving the entire tailstock.

Drilling device BV 2000 A precise machine for parallel drilling, tapping and milling. Made from high-precision machined aluminium die-cast parts. 20-mm MICROMOT system fit. With double-swivelling articulated arm and 20 mm system fit. The clamped device al

MICRO Click torque wrench with ratchet function and automatic release. 3/8'' (0.95cm) High precision in accordance with DIN/ISO. Tolerance: +/- 3%. Large, easy-to-read scale for exact adjustment of the desired torque by rotating the knurled sliding ring o

Extremely sharp blades vibrate in the ultrasonic frequency range. Fast, effortless and with high precision! For straight and curved cuts. For dust-free cutting of fibre materials such as carbon. Ideal for processing 3D printed parts. Easily cuts plastics,

Drilling and milling unit Micromot 60/E for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing. Voltage supply: 12 V by Proxxon power supply unit 28704/28706 Idle speed: adjustable fro

Tungsten-vanadium steel twist drill. Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

Drilling and milling unit Micromot 60 for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing. Voltage supply: 12 V Idle speed: 20,000 rpm Extremely easy to manage with a diameter of on

MICROMOT 110/P Flexishaft Rotated aluminium tool holder with dual ball bearing-mounted steel shaft. Ball bearing-mounted shaft end. Highly flexible core (does not run hot when working with tight radii). With quick-action chuck, 0.3 to 3.2 mm. Convenient w

Micromot steel collets for all hand-held Micromot devices. 1 piece each for 1.0/1.5/2.0/2.4/3.0/3.2mm with clamping nut and collet holder.

Corundum cutting discs, manufactured with a special binder. 50 discs, diameter 22mm

Flap wheels made of standard corundum The flap wheels are elastic and adapt to the contours of the workpiece to be processed. For machining hard to reach places. Flap wheel diameter 30mm (Shaft diameter 3.0mm)

For drilling, milling, grinding, polishing, cleaning, carving and engraving. The extremely slim housing (made from glass-fibre-reinforced polyamide) with a soft component in the grip area allows the device to be guided with two fingers (pen grip). With a

Diamond grinding pins, cylinder 1.8mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter

MICROMOT 60/EF with power supply unit and 43 industrial-grade tools With quick-release chuck. Convenient when working with different shaft diameters. Balanced DC motor. Quiet and extremely durable. Ground ball-bearing spindle. Electronic speed control fro

For cutting, roughing, grinding, fine sanding and shaping in wood. Balanced DC special motor, powerful, quiet and durable. Stable gear head made of die-cast aluminium. Main housing made of glass fibre reinforced POLYAMIDE. Complete with grinding wheel mad

M 3 - 4 - 5 - 6 - 8 and 10. With clamping pin Ø 10 mm for mounting in the tailstock drill chuck of the lathe. When thread cutting, the holder is held by hand. Completely packed in a wooden case with sliding lid. Accessories for lathes

Normal teeth, (No. 5: 17 teeth on 25 mm) For soft and hard wood, plastic, plexiglass and soft non-ferrous metals 130 x 1.20 x 0.38 mm

HSS spiral drill set consisting of 1 piece in each size: 0.3/0.5/0.8/1.0/1.2/1.5/2.0/2.5/3.0/3.2mm. For drilling non-ferrous metal, steel and stainless steel.

For standard brushes and inserts up to 4 inches or 102 mm. Load-bearing design with aluminium side panels and milled bearings ensures low-vibration and very quiet running. With a long, ball-bearing-mounted main shaft (distance from disc to disc approx. 36

Compact and powerful battery device made in Europe. With transmission head made of die-cast aluminum for high stability! High-quality 10.8 V Li-ion battery with 2.6 Ah for a performance comparable to that of our mains-connected counterpart. With a batter

PROXXON professional grinding and polishing set for fine grinding and polishing. For repairs and work in confined areas, such as on motorcycles, rims and passenger car interiors and engine compartments. With an 80 mm extension for low-lying trouble spots.

Cordless orbital polisher EP/A. Made in Europe. High-quality 10.8-V/2.6-Ah Li-ion battery. Latest technology! At least 30 minutes of powerful use with one battery charge. No other device in this performance class can do that! The 11-mm orbital motion of

PROXXON diamond-coated cutting disc for LHW and LHW/A. For making very thin cuts in hard materials such as glass, porcelain and tiles. Low heat development thanks to a cooling hole.

Ideal for mitre cuts: Adjustments are made to the round table (with clamped work piece) and not to the headstock. The opposite angle for a second frame part of identical length achieved by simply shifting the longitudinal stop and rotating the table 2 x 4

MICROFLAME burner MFB/E - For soldering, unsoldering, brazing, heating, baking and tinning. Independently adjustable gas and air supply for consistent, fine flame shapes and temperatures up to 1300 °C. It is therefore suitable for micro precision work. El

Tungsten-vanadium steel twist drill. Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

MICRO Heat Gun MH 550 Small, robust and powerful. Complete with three additional nozzles. For shrinking hoses, shaping and welding plastic, and soldering and desoldering electronic components. For removing paint and varnish layers without strong chemical

Tungsten-vanadium steel twist drill. Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

Drill adapter for 1/2'' sockets

New battery device made in Europe. For commercial use. Slim, bearish and to touch! High-quality 10.8 V Li-ion battery with 2.6 Ah for a performance comparable to our mains-connected devices. With a battery charge, you can work for at least 30 minutes eve

With multiple ball-bearing transmission in a strong, die-cast aluminium housing head. • Also suitable for right-angle cutting of rods. • Special balanced, powerful, quiet and long-lasting DC motor. • Infinitely adjustable speed regulator (full wave elec

Diamond-coated cutting disc for porcelain, glass fibre panels and non-ferrous metals. Diameter: 20 mm Thickness: 0.6 mm

Steady rest for longer workpieces Primarily for boring. Also required when it is not possible to ''counter'' with the tailstock. Up to Ø 40 mm.

Strong and versatile problem solver for the fine job in crafts and industry! Made in the EU. High-quality 10.8 V Li-ion battery with 2.6 Ah for a performance comparable to that of our mains-connected counterpart. With a battery charge, you can work for a

1/4'' socket wrench inserts and controls for fine mechanical components. Holds 1/4'' square socket wrench inserts and 1/4'' standard hexagonal bits. Simply slide the socket sleeve to change the socket. For use in cordless and electric screwdrivers.

The PROXXON Li-ion battery makes long and high-power working possible. The integrated temperature monitoring feature ensures safe use. One battery charge lasts for at least 30 minutes, even when it is used at a high-power setting.